Refine by
Effluent Testing Articles & Analysis
19 news found
In response, we have now developed and launched a colorimetric approach to ammonia monitoring, that is based on an established reagent based assay and delivers non-drift, lab-quality data. Having already tested this succesfully on effluent monitoring at a local WWTP, we have now started a trial with one of the most innovative UK water utility companies.' ...
A number of mobile water quality monitoring laboratories were dispatched to Zhuozhou for flood disaster by FPI, fully equipped with the vehicle-mounted ICP-MS, GC-MS, LC-MS and other analysis monitoring equipment, which has been in operation since 2019,capable of measuring a total of 145 indicators related to regulatory standards, including conventional pollutants, microorganisms, organic matter ...
In a series of two new pilot programs, NX Filtration’s nanofiltration membranes will be tested for the reuse of effluent from a municipal wastewater treatment plant as well as for the treatment of surface water. ...
Once connected to odour treatment plant using physical-chemical absorption, such as chemical scrubbing and activated carbon filtration, the innovative OSMOTREFF provides on line monitoring of treatment efficiency and can conduct pilot tests on effluent gases to help further improve the process. The odorous compounds contained in conveyed gaseous flows are ...
The testing established the project’s compliance with California’s stringent Title 22 standards for nonpotable water reuse, with a total nitrogen limit of 10 mg-N/L. ...
Update on Clyra, Advanced Wound Care: Clyra recently completed development of two advanced wound care products; The rigorous testing required by the FDA has been successful for the two products. ...
Wastewater professionals who are enforcing industrial effluent standards for fats, oil and grease (FOG) either must perform numerous gravimetric tests or spend a considerable amount of money with a contracted testing laboratory. ...
Research and development for the benefit of our customers: Before the Clearcat systems reached serial maturity, they were tested extensively in H2O’s technical lab. Emulsions are needed in many production processes of metal working and machining industries. ...
ByH2O GmbH
Maxxam’s Becquerel Laboratories has recently received accreditation by the Ministère du Développement durable, de l’Environnement et de la Lutte contre les changements climatiques (MDDELCC) to ISO/CEI 17025 standards for analysis of Radium 226 and Tritium in drinking water and Radium 226 in effluent. Radium 226 testing is a requirement ...
Ozone Tech Systems OTS AB has on behalf of a major pharmaceutical company performed lab scale wastewater treatment tests on one of the company's process effluent. The tests were very successful with over 30 % better results than our theoretical studies and calculations anticipated. Next step in this project will be designing, manufacturing and ...
Environmental Protection Agency reports that these costs are increasing due to rising energy prices and more stringent requirements for effluent quality. ** The tests were conducted by Xylem at the Sternö municipal wastewater treatment plant in southern Sweden, which was built in 1997 and is designed to serve 26,000 people. Aeration was consuming 44 percent ...
Scope 1.1 This test method describes the procedures for determining the mass concentration of particulate matter in gaseous streams using an automated, in-stack test method. ...
1. Scope 1.1 This test method covers hydraulic conductivity compatibility testing of saturated soils in the laboratory with aqueous solutions that may alter hydraulic conductivity (for example, waste related liquids) using a flexible-wall permeameter. ...
Scope 1.1 This test method describes the procedures for determining the mass concentration of particulate matter in gaseous streams using an automated, in-stack test method. ...
Scope 1.1 This test method describes the procedures for determining the mass concentration of particulate matter in gaseous streams using an automated, in-stack test method. ...
Requiring the use and reporting of BMPs to prevent further degradation of water quality during construction; Monitoring to assess construction BMP effectiveness, with a threshold to trigger an adaptive management plan using a watershed approach to address historic impacts; Requiring chronic Whole Effluent Toxicity (WET) testing to complement monitoring required ...
The respirometer tests for two key items: toxicity and biodegradability. For low COD effluent a zero inhibition result is sufficient but if the COD is high we need to see an increase in respiration proportional to concentration. ...
The OMNIPURE Series 55 system has been specifically designed, manufactured and tested to comply with MEPC.159(55) effluent standards and performance tests for sewage treatment plants across a variety of offshore and marine installations. The MEPC.159(55) effluent standards, adopted by the International Maritime ...
The recuperative thermal oxidizer is built for effluent from a continuous production test unit. The oxidizer capacity is up to 20,000 scfm. ...