- Home
- Applications
- emissions control
Refine by
Industries served
- Air and Climate
- Oil, Gas & Refineries
- Energy
- Manufacturing, Other
- Agriculture
- Construction & Construction Materials
- Monitoring and Testing
- Environmental
- Automobile & Ground Transport
- Food and Beverage
- Mining
- Glassware
- Pulp & Paper
- Commercial
- Metal
- Water and Wastewater
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Plastics & Resins
- Maritime/Shipbuild/Water Transport
- Forestry & Wood
- Medical / Health Care
- Paint
- Printing
- Waste and Recycling
- Textile
- Electronics and Computers
- Communications / Telecom / Datacom
- Health and Safety
- University / Academia / Research
- Furniture
- Packaging
Emissions Control Product Applications
431 applications found
The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and ...
ByEmiControls based in Bolzano, ITALY
Premium
Fluid Catalytic Cracking Technique is an important mean to improve the efficiency of use of oil resource in oil refining industry. Poor quality of crude oil and strict requirements of environmental department push the development of Fluid Catalytic Cracking Technique. Enhancing heavy-oil refining capacity, improving product quality, reducing pollutant emission and raising economic efficiency are the starting point of the ...
ByHangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA
Incoming water treatment for the removal of trihalomethanes (THMs), tastes, odors, chlorine, chloramine, pH and alkalinity control; process treatment of tannin and de-colorization of “clear” beers; vapor treatment of carbon dioxide (CO2), SO2 and odor control from wort kettle steam, and fumigant emission control, are all applications for which activated carbon can be effectively used. ...
ByGowrishankar Chemicals Pvt Ltd based in Tumkur, INDIA
Robust air pollution control systems are required in the aggressive manufacturing processes of chemical manufacturing and incineration processes. Wet pollution control technologies are ideal for these tough environments. Variable-throat venturis provide constant particulate emissions control even in varying process conditions. WESPs are often required to meet fine particulate emission regulations, and absorption stages are added ...
ByAirPol based in Pittsburgh, PENNSYLVANIA (USA)
Equipment and systems for Kraft and Sulfite mills. Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge and fired boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Burning biomass and or coal releases particulate matter (PM) to the atmosphere, polluting the surroundings and harming the human health. PM emissions is a common problem in industries that operate furnaces or boilers to generate heat or steam for their processes or for electricity generation to be sold to the grid. The general arrangement of a biomass or coal combustion plant includes a cyclone pre-separator to reduce the concentration of particles after the boiler and a final dedusting ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The hot water is connected to an ORC turbine system which produces electricity. State-of-the-art emission control meets the regulations and requirements set by the European Union. ...
ByAgainity AB based in Norrköping, SWEDEN
Separating particles from the air at high temperature serves multiple needs that go from thermal energy recovery in several industries to improving the economics of power and incineration ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Since many of the compounds are hazardous pollutants, the air exiting the stripper may require emission control. Some common compounds that can be removed by air stripping include Ammonia, Benzene, ...
ByKemFlo Canada Inc based in Ontario, ONTARIO (CANADA)
Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Tri-Mer Corporation is a leader in air pollution control, with more than 6,000 installed APC systems worldwide. Tri-Mer is also the leader in equipment for removing PM, SO2, and NOx from large-scale stationary diesel operations. Tri-Mer’s UltraCat Catalytic Filter system is the world’s premier dry technology for PM+ SO2+ ...
ByTri-Mer Corporation based in Owosso, MICHIGAN (USA)
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines ...
ByDynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM
Premium
Today different ministerial directives lead the market to follow the industries. There are power stations, incinerators (domestic wastes, mud, hospitals…) cement industry, ...
ByChromatotec based in Saint-André de Cubzac, FRANCE
Premium
The ceramic industry demands enormous amounts of energy for the drying processes of various material, including clay, glass, brick, tiles and fixtures. The best way to improve the efficiency of ceramic manufacturing is to connect a gas turbine to the spray dryer, providing heat along with electrical power for the ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)
Filter and Catalyst Testing: CAST soot generators are used to evaluate the performance of diesel particulate filters (DPFs) and other emission control devices. This helps in developing more efficient systems to reduce harmful ...
ByJing Ltd. based in Zollikofen, SWITZERLAND
Removable insulation blankets and heat shields can be placed on key generator and engine components to help you implement better heat management and containment. Control excessive heat, improve sound abatement concerns and meet emission control requirements for your on-site power ...
ByOrange County Thermal Industries, Inc based in Orange, CALIFORNIA (USA)
PureAir Filtration specially manufactures a number of products to remove unwanted odors and emissions from various environments, depending on the gas that is causing the ...
ByPure Air Filtration, LLC based in Norcross, GEORGIA (US) (USA)
Fewer emissions, optimized operation. The production of cement consumes large amounts of energy and is subject to strict emission controls to protect the environment. We advise you on how you can create and safeguard production capacities, reduce downtimes and contribute to reducing emissions with the right filtration solutions. Our dust extraction filters are characterized by their long service life, energy efficiency, excellent cleanability and ...
ByHengst SE based in Münster, GERMANY
Thermal decomposition processes (TD Processes), such as Pyrolisis, Incineration and Gasification are increasingly related with carbon capture, originated from several sources, from RDF to Biomass. CO2 is not solid and thereby it is impossible for it to be captured or filtered. However, several technologies are emerging for the conversion of biomass to fuels and thereby storing CO2 on a solid form. Bioenergy with carbon capture and storage (so called BECCS) is the process of using biomass, such as trees, crops, or ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL