- Home
- Applications
- europe
- emissions control
Refine by
Locations
Industries served
- Energy
- Agriculture
- Construction & Construction Materials
- Monitoring and Testing
- Manufacturing, Other
- Oil, Gas & Refineries
- Air and Climate
- Environmental
- Automobile & Ground Transport
- Food and Beverage
- Mining
- Aerospace & Air Transport
- Pulp & Paper
- Water and Wastewater
- Glassware
- Metal
- Medical / Health Care
- Paint
- Plastics & Resins
- Printing
- Waste and Recycling
- Maritime/Shipbuild/Water Transport
- Textile
- Commercial
- Chemical & Pharmaceuticals
- Forestry & Wood
- Health and Safety
- University / Academia / Research
- Furniture
Emissions Control Product Applications In Europe
280 applications found
The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and ...
ByEmiControls based in Bolzano, ITALY
Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of ...
ByEmiControls based in Bolzano, ITALY
High volumes of dust, often extending over large areas, present a major challenge for the operators of opencast mines and quarries. If conditions are also dry and windy, the dust will affect not only the workforce but also, in many cases, entire housing estates in the vicinity. The sources of dust in surface mining areas are often distributed over very large expanses, with dust originating from various places. With their large projection range, EmiControls dust controllers are ideal for such applications. Mobile ...
ByEmiControls based in Bolzano, ITALY
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Firefighting operations at airports are particularly critical as they normally involve rescuing people. The large quantities of aviation fuel make it a very high-risk activity with intense heat ...
ByEmiControls based in Bolzano, ITALY
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
These businesses require provide proven emission control solutions, including mist elimination and odor ...
ByCECO Environmental based in Addison, TEXAS (USA)
Steel and ferroalloys manufacturing processes involve high temperature exhaust streams, often at more than 900ºC. Typically, the gas flows from the furnace (usually electric arch type) and goes into a gas conditioning tower to cool down below 200ºC so that it can be treated by a Bag Filter. It's also common to have ESP´s as end dedusters that can be preceded by a multicyclone serving as ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Demolition work and the dust it generates is a big problem for residents and the environment when work is carried out in residential areas. EmiControls offers the right dust control solution for every type of demolition work, thereby protecting the inhabitants, neighboring buildings and the environment. Because the source of dust can move constantly during the demolition process, mobile solutions are ideal as they can be positioned and pivoted easily and quickly. And they can be removed from the site when the work ...
ByEmiControls based in Bolzano, ITALY
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The global push for higher efficiency standards, tighter emission controls and a reduction in the allowable cabin noise have prompted a shift to smoother surfaces and complementary metrology methods. The industry is also witnessing the transition from off-line quality control inspection to on-line or in-line production metrology to enable rapid process feedback as part of a Smart Factory environment. ...
ByZygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA)
With dust collection and ambient air quality a top concern, the minerals industry has looked to Auburn FilterSense to deliver solutions with added value and a quick return on investment. B-PAC™ Controls installed on dust collectors provide dramatic energy savings, maintenance reductions, and emissions control while the use of Auburn FilterWARE™ HMI/SCADA software automates the creation of US-EPA and other regulatory ...
ByAuburn based in Beverly, MASSACHUSETTS (USA)
The IMO (International Maritime Organization) continuously sets new standards in order to minimize and control the harmful polluting exhausts from vessel engines. IMO is the World’s largest maritime organization with over 170 member states and acts as a regulatory agency for the international maritime ...
ByXenemetrix Ltd. based in Migdal Haemek, ISRAEL
For PM emission control in high temperature exhaust streams, such as those from fuel oil boilers, common dedusters like bag filters, have very high maintenance costs. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The conventional way to reduce emissions in this industry is by installing thermal oxidizers, often in combination with chemical scrubbers, or by installing large carbon beds. Investment is high, as are the operating costs, caused by increasing energy costs, carbon replacement, demanding maintenance and by having to add chemicals. The corrosive reaction of sulfur has its own impressive impact on ...
ByAzzuro APC LLC based in Scottsdale, ARIZONA (USA)
Where there are people, there is a demand for food and agricultural products. Most people do not realize that the manufacturing and processing plants not only do their best to produce the best possible quality, but also do their best in trying to minimize (odor) nuisance to the ...
ByAzzuro APC LLC based in Scottsdale, ARIZONA (USA)
Azzuro’s Sulfatech Biogas Desulfurization system takes care of numerous gases such as hydrogen sulfide and siloxanes that will damage gas powered generators and other gas powered equipment. The Sulfatech system offers a highly efficient and cost-effective alternative to historical methods of reducing sulfur emissions. In contrast to amine treatment, thermal oxidation, or caustic scrubbing, Azzuro’s technology provides expanded capabilities for treatment of gas, biogas or boilergas while offering higher ...
ByAzzuro APC LLC based in Scottsdale, ARIZONA (USA)
Today, steel production is becoming more and more technology intensive. Advanced control systems are under continuous development and large potentials to exploit their benefits therefore exist. The control systems optimize process operations leading to reduced processing time, reduced maintenance costs, increased energy efficiency, improved product quality and consistency as well as better emission ...
ByFocused Photonics Inc. (FPI) based in Hangzhou, CHINA
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Dürr is a long-recognized, trusted supplier of liquid atomization technologies and emissions control solutions for the cement ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)