- Home
- Applications
- en standard
Refine by
En Standard Product Applications
22 applications found
As the world leader in the field of cooling device recycling, we are engineering technically sophisticated plants corresponding to the new standard EN 50625. The CENELEC standard EN 50625, which is the new version of the EN 50574, is requiring high demands on the disposal of old refrigerators. ...
ByURT Umwelt- und Recyclingtechnik GmbH based in Karlstadt, GERMANY
These analyzers are required to provide accurate and reliable results continuously to conform to the specifications of ASTM or EN standards. The GASMIX™ instruments represent the most cost effective and reliable solution for these laboratories, which mostly need to be operational 24 hours / 24 and 7/7. ...
ByAlyTech based in Juvisy sur Orge, FRANCE
Locating and quantifying fugitive emission sources according to EN 17628:2022 standard and monitoring operations to mitigate the waste of raw material and allow for comparison against calculation ...
ByAeromon Oy based in Helsinki, FINLAND
VOC emissions are quantified and monitored according to standard EN 12619, using FID analyser which uses hydrogen and other reference gases in pressurized cylinder. ...
ByPollution S.r.l. based in Budrio (Bologna), ITALY
Galvanized Steel Guardrails for Highway Roads Safety Fencing We supply galvanized guard rails for highways projects in Germany, India, Cyprus and other countries. Galvanized steel guard rails include following elements, with technical specification and ...
ByHuaway Guardrail Engineering Co based in Dezhou, CHINA
Valves can be supplied according to the most well know international standards as EN (EN 593, EN 558, EN 1171, EN 1174), DIN 3202, BS, ISO, AWWA C-508, AWWA C-509 and more. ...
ByInvalves Service S.r.l. based in Gorla Minore (VA), ITALY
Salher® brand hydrocarbon separators are installed worldwide. Treatment flows from 0,5 to 1.000 l/s. ...
BySalher based in Madrid, SPAIN
Many laboratories conduct air testing and monitor industrial emissions to meet environmental standards. Current standards like EN 14181 and ISO 14385 describe the quality assurance procedures for calibration and ongoing quality control ensuring proper operation of automated measuring systems (AMS) to measure emissions of greenhouse gases. ...
ByAlyTech based in Juvisy sur Orge, FRANCE
High-end furniture does not have to be made from hard-wood, in fact, more efficient alternatives are taking over the ...
ByArundo BioEnergy based in Budapest, HUNGARY
In situations where there is a risk that protective garments could generate sparks (an ignition source) that could ignite explosive material, flame retardant workwear that has anti-static properties is required. A combination of anti-static materials and correct garment design can eliminate the risk of sparks. Protective clothing with anti-static properties is extremely important when working with petrochemicals, gas and in other areas where there is a high risk of ...
ByTranemo Workwear LTD based in Cramlington, UNITED KINGDOM
The chemical industry is completely dependent on reliable supplies of process gas. But each process is different and requires specialized machines. The solution: the efficient compressors and blowers from AERZEN – proven in numerous operating environments, suited for almost all media, unrivalled in their reliability, and adaptable to individual client specifications. Can the solution really be this easy? It can! The EU directives for explosion protection play an important role, among others, in the chemical ...
ByAerzen International Rental B.V. based in RR Duiven, NETHERLANDS
Always effective and safe disinfection at your fingertips. Dependence on suppliers, sharply increasing costs and harmfulness of chemicals are major obstacles to good hygiene in healthcare. Watter has been the expert in sustainable disinfection for more than ten years. We are the only one in the Netherlands to offer a structural solution that makes you self-sufficient. Say goodbye to third parties and let us inform you about the benefits for you. ...
ByWatter B.V. based in Tynaarlo (Drenthe), NETHERLANDS
Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after ...
Byecon industries services GmbH based in Starnberg, GERMANY
Water hardness results in the precipitation of the salts dissolved in the water, such as calcium, magnesium and hydrogen carbonate. This undesirable scaling can cause malfunction and loss of efficiency in industrial processes. The associated consequences often involve high costs. Avoid unnecessary expenses by using PureBlue ...
ByPureBlue based in Kapellebrug (Hulst), NETHERLANDS
Choosing the right food safe disinfectant is vital for businesses in the food and beverage industry. Bacteria and viruses can cause food poisoning and other illnesses, presenting risks to consumers, customers, employees and business reputations. ...
ByOxyl-Pro, Trademark of Chemiteq Limited based in Warrington, UNITED KINGDOM
Customer-specific solutions offering WEEE Directive compliance. One of the greatest challenges facing our society is the reclamation of valuable raw materials from electrical and electronic scrap. A global scrap volume exceeding 40 million tonnes a year – a figure forecast to double by 2025 – presents both a challenge and an opportunity. Since even in Germany only some 40% of scrap is currently fed into a waste management process, we may assume that the global rate of waste management is still ...
ByErdwich Zerkleinerungs-Systeme GmbH based in Igling, GERMANY
BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Reliability and safety integrity level of any gas detection system starts with the gas sensing elements. N.E.T. range of NDIR, Electrochemical and catalytic bead sensors ensure reliable and field-proven performances ...
ByNET Srl based in Pregnana Milanese, ITALY