Refine by
En Standard Software
23 software items found
by:Exel S.r.l. based inSan Mauro Torinese (TO), ITALY
The optional SPD module allows the following operations: Sizing and verification of class I, II and I + II surge arrestors (SPD), according to the CEI EN 62305 standard, with calculation of the maximum protected lengths of the conductors leaving the switchboards, with or without the presence of a LPS on the structure to be to protect. ...
Manufactured by:fionec GmbH based inAachen, GERMANY
In addition to these features, DataViewer Pro extends its functionality by offering operations such as Fast Fourier Transformations, bad value filters, and regression analysis. An optional module is available for calculating roughness parameters as per DIN EN ISO standards, enhancing its utility in industrial ...
by:Edilclima S.r.l. based inBorgomanero, ITALY
EC733 software module allows to design and to check the correct sizing of a single chimney according to EN 13384-1 standard. ...
by:Edilclima S.r.l. based inBorgomanero, ITALY
EC709 calculates the linear thermal transmittance of thermal bridges as a function of selected design parameters according to the procedures defined in the standards EN ISO 10211 and EN ISO 14683. EC709 can be used either stand-alone or as an additional module fully integrated within EC700 Energy performance calculation software. ...
by:ETU Software GmbH based inCologne, GERMANY
Calculation of heat loss of rooms, dwellings and commercial buildings.. Room-by-room heat loss calculations in accordance with the DIN EN 12831 standard. Calculation of radiators, underfloor or wall heating systems based on the heat loss calculation. Automatic positioning of radiators and underfloor heating in the CAD model. Transfer of the calculation results ...
by:Namirial S.p.A. based inAncona (AN), ITALY
CPI win® REI is the Namirial best solution for analytical verification of structures fire resistance according to EUROPEAN STANDARD UNI EN. ...
Manufactured by:Fibo Intercon A/S based inVidebæk, DENMARK
By tracking concrete mix tolerances, Fibo LINK issues alerts to refine mix compositions, thus reducing waste and enhancing profitability. It also integrates stock control to prevent material shortages and ensures compliance with EN/BS standards by archiving batch data for over six years. The software enables remote recipe adjustments, preventive maintenance ...
Manufactured by:MonZon based inSatila, SWEDEN
Design your scaffolding project from your .pdf or 3D model. Design and verify your scaffold and weather protection as one whole construction as required in the European standards SS-EN 12810-1, SS-EN 12811-1 and SS-EN 16508:2015. Design and verify your scaffold as required in AS/NZS 1576.3, ANSI SC100-5/05 and CSA S269.2. Add ...
by:One Click LCA Ltd. based inHelsinki, FINLAND
Get reliable whole building life-cycle assessments, instantly; Automate LCA with BIM & BEM integrations. Get results that comply with EN & ISO standards, LEED, BREEAM, and 70+ other certifications. User-friendly, yet powerful. Everything you need to design greener buildings & achieve certifications; One Click LCA combines intuitive functions with the ...
Manufactured by:Wurm GmbH & Co. KG Elektronische Systeme based inRemscheid, GERMANY
FRIGODATA ONLINE 2.0 is an advanced data management and monitoring platform that enables plant operators to efficiently manage energy consumption, optimize plant performance, and ensure compliance with safety standards like HACCP. This web-based solution facilitates real-time data visualization and analysis across various plant components, including refrigeration, climate, ...
by:Readunit ApS based inKolding, DENMARK
When you’re working at height, it’s important that the ladder can withstand the load. That’s why it’s essential to have ladders inspected ...
by:DC-Software Doster & Christmann GmbH based inMünchen, GERMANY
The DC-Settle program is used to calculate settlements for any number of load application areas with mutual influence upon each other using the stiffness modulus method. The subsoil can be defined via bore points. The stratification between the points is interpolated. The settlement progression can be displayed both in sections and over the surface with contour lines or colour ...
by:One Click LCA Ltd. based inHelsinki, FINLAND
Automate building life cycle cost calculations; Calculate costs from all life cycle stages. Compare and choose the most eco-friendly and cost-efficient design. Submit life cycle cost results to earn certification ...
by:DC-Software Doster & Christmann GmbH based inMünchen, GERMANY
The DC-Pylon Footing program comprises the calculation of fixed block and pylon footings in accordance with the method by Steckner. The calculation includes the serviceability and stability ...
by:DC-Software Doster & Christmann GmbH based inMünchen, GERMANY
The DC-Bearing program is used to perform the general ground failure verification for rectangular, circular and strip foundations for horizontal and inclined ground surface conditions with a multi-layered soil structure in the horizontal direction. The available calculation methods are either in accordance with the relevant standard or Terzaghi or Brinch Hansen. Different construction stages can ...
by:ACCA Software based inBAGNOLI IRPINO (AV), ITALY
Discover the software for calculating thermal bridges with an integrated FEM solver! The only way to calculate thermal bridges with any type of material and of any shape or form! Find out more ...
Manufactured by:Innovation Technology Environment Quality (ITEQ) based inFloreffe, BELGIUM
The encoding of inspection data is easy and logical. Encoding the inspection data is quick, logic and complete. Three types of data can be encoded during the inspection: References of the owner and his sprayer (which can also be encoded through the “diary” unit), visual observation (without measurement), data from ...
by:DC-Software Doster & Christmann GmbH based inMünchen, GERMANY
The DC-Footing program is used to perform the foundation engineering verifications overturning, sliding, ground failure, soil pressure and settlement for several types of footings with horizontal and inclined ground surfaces and with a multi-layer soil structure. Different construction states can be considered in the calculation as excavation stages with slopes. The reinforced concrete design of ...
Manufactured by:Innovation Technology Environment Quality (ITEQ) based inFloreffe, BELGIUM
The operator can insert all his administrative references (name, address…) as well his logo (b&w or colour). His references will be shown in the windows of the software and will be printed on the inspection report. The report is personalised for each ...
by:Edilclima S.r.l. based inBorgomanero, ITALY
EC700 allows the calculation of the energy performance of buildings in accordance with the UNI/TS 11300 technical specification, taking into account all the services envisaged by the UNI/TS 11300-5 technical specification (heating, cooling, domestic hot water, ventilation, energy needs of escalators and elevators, and lighting). The software, characterised by a modular structure, constitutes the ...