- Home
- Applications
- ftir
Refine by
Ftir Product Applications
107 applications found
Premium
'Chemical industry' can comprise many types of industries, for example refineries, paper mills, fertilizer production, and sulfuric acid plants. Each individual industry may have its own special needs and special environments, but there are also many common factors. Regardless, process control and emissions monitoring at chemical plants can be challenging due to for example toxic, aggressive and/or explosive gases, and high temperatures. The use of extractive systems in such environments requires a lot of ...
ByOPSIS AB based in Furulund, SWEDEN
Polymers are present in virtually all products we interact with daily. With increasing environmental awareness, polymer science is looking at more novel and complex solutions to improve functionality and reduce environmental impact. These requirements often exceed the limits of traditional IR microscopy, especially when it comes to spatial resolution. The mIRage IR Microscope, with its unique submicron spatial resolution using a non-contact reflection mode technique, is able to meet even the most demanding of ...
ByPhotothermal Spectroscopy Corp. based in Santa Barbara, CALIFORNIA (USA)
Due to the worldwide increase of illegal synthetic drugs and their legal definition, it is essential to differentiate between isomers of illicit drugs. To comply with accepted standards for identification, this typically requires a combination of instrumental and chemical techniques. Gas Chromatography- mass spectrometry (GC-MS) is a powerful tool used in forensic chemistry for the identification of the complex mixtures often encountered by forensic chemists. In GC analysis, compounds are separated from a mix and ...
ByAnalytical Solutions and Providers (ASAP) Analytical based in Covington, KENTUCKY (USA)
Typical modern printing processes utilize solvent-based dyes. The evaporation of the dye solvents into the ambient air during the printing process may expose the workers to various chemicals. Depending on the type of solvents in case, the solvents have different long term exposure limits, which should be obeyed. Component specific measurements are necessary to protect the workers from exposure while avoiding unnecessary interruptions to the printing process from false ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
NMR is an excellent tool for quantification and identification. The peaks in the spectrum will appear in predictable locations in the spectrum and their intensities are proportional to the number of nuclei in the ...
ByMagritek Ltd. based in Malvern, PENNSYLVANIA (USA)
Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Formulation is a major component in the efficacy of a drug. Formulation involves the preparation/mixture of an active pharmaceutical ingredient in/with a physical carrier (i.e., a tablet, spray, inhaler, or syrup) to insure adequate efficacy, delivery, and stability. Heavily used in formulation, polymeric excipients such as copovidone (PVP/VA64) can serve various functions when added to API such as matrix former, binding agent or sustained release ...
BySpectra Analysis Instruments, Inc. based in Marlborough, MASSACHUSETTS (USA)
CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
The aluminium industry is the major source of perflurocarbon (PFC) emissions to the atmosphere, which are a major contributor to global warming. PFCs have greenhouse gas effects up to 10000 times that of CO2. Emissions have been reduced over the last 20 years, but further reductions are harder to achieve as all the mechanisms for PFC production are not known. In order to better understand the production of PFC on an industrial level, laboratory studies have been carried out using a small scale ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to ...
ByBruker Corporation based in Billerica, MASSACHUSETTS (USA)
The nation has stockpiled thousands of cylinders and canisters of toxic and deadly chemical weapon agents, including mustard gas (HD), sarin (GB), tabun (GA), and V-agents. Most of these CWAs are stored at DOD facilities around the country and many have been in storage for years and years. As a consequence, DOD requirements specify that the stockpiles have to be monitored regularly for leakages to prevent release to the environment and exposure to ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
BS EN 14181 is a quality assurance standard relevant to plants operating under the Large Combustion Plant (LCPD) and Waste Incineration (WID) Directives. Quality Assurance Level 2 (QAL2) of this standard involves the parallel testing of the plant automated measurement systems (AMS) against a certified test house, making measurements with a comparative standard. ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
CFCs are used in the manufacture of insecticides and herbicides and the environmental impact of their use must be well controlled. The treatment of CFC emissions to reduce the emissions in the intermediary steps of production needs to be monitored with 100% efficiency. Protea’s portable CFC analysers and continuous CFC monitoring systems can be configured with various sample inlets and analytical modelling to enable multi-samples to be measured on the one system. This means that both inlet and outlet to ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Sea cargo containers and wooden packing materials are fumigated to control the spreading of pest animals and micro-organisms. Fumigant gases are toxic and measurements are carried out as a health and safety precaution. Measurements are required by e.g. customs inspectors prior to opening containers, making the shipping companies responsible for carrying out measurements. Products shipped in containers may release VOCs from e.g. solvents and glues used in manufacturing process. The concentrations of vapors may be ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each year ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
The installation of suitable installation material in buildings is a cost effective way to reduce energy costs. The manufacture of insulation from minerals or mineral products, such as glass. Recycling glass to form insulation materials is another way to keep the process ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Confidently identify thousands of chemical threats immediately to ensure customs and borders safety. Balancing security and efficiency remains one of the most significant challenges in customs and borders protection. This entails implementing stringent measures to combat illegal activities such as smuggling, trafficking, and terrorism while ensuring the seamless and lawful movement of goods and people through customs and ...
By908 Devices Inc. based in Burlington, MASSACHUSETTS (USA)
From plant biology to medical research, life science is an ever expanding research field that has impact in numerous industries. Providing submicron spatially resolved chemical analysis on biological samples, in a label free and objective approach, has proven itself to be a difficult result to obtain. The mIRage IR Microscope has accomplished this with its non-contact reflection mode O-PTIR technique, and is unlocking numerous applications capabilities. ...
ByPhotothermal Spectroscopy Corp. based in Santa Barbara, CALIFORNIA (USA)
The act of capturing and storing CO2 produced from large scale combustion plants such as power stations is becoming more and more favourable and feasible. One of the most common post-combustion CO2 capture methods is by absorption. The absorption plant can be added on to the existing combustion process, with the flue gas first passing through an absorption column where the CO2 reacts with an ...
ByProtea Limited based in Middlewich, UNITED KINGDOM