- Home
- Applications
- gas cell
Refine by
Gas Cell Product Applications
27 applications found
Universities and research institutes, including federal agencies and laboratories, regularly call upon CIC Photonics to custom design and fabricate gas cells and FTIR gas analyzers for innovative research studies. Their research spans a range from the synthesis of new chemicals to spectroscopy of the universe. ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
ByGardner Denver Thomas GmbH based in Fürstenfeldbruck, GERMANY
The CHALLENGE AER-200 Respirometer System consists of one or more biological reaction vessels, gas flow measuring cells, and a computer. The gas measuring base contains eight flow ceHs and associated interconnecting circuitry. As gas flows through each cell under the influence of a slight pressure caused by gas production in the reaction vessel, bubbles of a fixed volume are formed in the lower section of the ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
The EC-MS can be used to study dissolved gasses from reactions in the electrolyte or at the electrodes of battery cells. Gas evolution results of LiO2 or sodium-ion-battery (NIB) cells can then be used to evaluate the effect of different catalysts. ...
BySpectro Inlets ApS based in Søborg, DENMARK
Hydrogen and Carbon Monoxide abatement from fuel cell off gas processes – commonly use specialty catalyst for air pollution control ...
ByCatalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA)
As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog. ...
ByCECO Environmental based in Addison, TEXAS (USA)
Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation ...
ByThermal Structures, Inc. based in Corona, CALIFORNIA (USA)
Process Information: Electrolysis of brines with chlorine production at the anode and hydrogen together with sodium or potassium hydroxide at the ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Premium
Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Electrolysis of brines with chlorine production at the anode and hydrogen together with sodium or potassium hydroxide at the ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Electrolysis of brines with chlorine production at the anode and hydrogen together with sodium or potassium hydroxide at the ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Electrolysis of brines with chlorine production at the anode and hydrogen together with sodium or potassium hydroxide at the ...
ByBegg Cousland Envirotec Limited based in Glasgow, UNITED KINGDOM
Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Ammonia is a notoriously difficult compound to measure accurately and reliably using standard chemical sampling techniques. The great advantage of the optical laser gas detection technique for quantitative ammonia monitoring is that the optical measurement does not affect the air being sampled – and so a true, undisturbed value for ammonia concentration can be determined. The very high resolution and specificity of the laser method also means that is no interference from other gases in the air (for example, ...
ByBoreal Laser Inc. based in Edmonton, ALBERTA (CANADA)
The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each year ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)