- Home
- Applications
- USA
- gas cell
Refine by
Gas Cell Product Applications In USA
21 applications found
Universities and research institutes, including federal agencies and laboratories, regularly call upon CIC Photonics to custom design and fabricate gas cells and FTIR gas analyzers for innovative research studies. Their research spans a range from the synthesis of new chemicals to spectroscopy of the universe. ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
CIC Photonics first applied its IRGAS technology to semi-gases when a major semiconductor equipment manufacturer, Applied Materials, requested a demo of its capability to monitor gas quality for epitaxial reactor applications; that was in year 2000. The IRGAS System met all of the technical requirements, which included ppb sensitivity for moisture as an impurity, gas cell chemical resistance to both acid and basic semi-gases, and fast concentration tracking time ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
The CHALLENGE AER-200 Respirometer System consists of one or more biological reaction vessels, gas flow measuring cells, and a computer. The gas measuring base contains eight flow ceHs and associated interconnecting circuitry. As gas flows through each cell under the influence of a slight pressure caused by gas production in the reaction vessel, bubbles of a fixed volume are formed in the lower section of the ...
ByChallenge Technology based in Springdale, ARKANSAS (USA)
ByGardner Denver Thomas GmbH based in Fürstenfeldbruck, GERMANY
Hydrogen and Carbon Monoxide abatement from fuel cell off gas processes – commonly use specialty catalyst for air pollution control ...
ByCatalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA)
As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. ...
ByGasmet Technologies - a Nederman company based in Vantaa, FINLAND
Cleaner burning than other fossil fuels, the combustion of natural gas produces negligible amounts of sulfur, mercury, and particulates. However, natural gas does produce nitrogen oxides (NOx), which contributes to smog. ...
ByCECO Environmental based in Addison, TEXAS (USA)
Whether you’re generating power for a single job site or hundreds of thousands people, power generation is a mission critical application. Thermal Structures products offer the extreme performance, durability and ease of installation that power generation ...
ByThermal Structures, Inc. based in Corona, CALIFORNIA (USA)
Premium
Introduction The natural gas is a significant source of ingres s of mercury in the environment. The typical mercury concentration in natural gas may vary from 0.01 to 200 μ g/m3 . Mercury, being present in hydrocarbon gas, initiates corrosion of pipelines and catalyst poiso ning during gas transportation and processing, and these effects have serious implications for the gas-processing ...
ByLumex Instruments based in Mission, BRITISH COLUMBIA (CANADA)
Pollutant emissions from industrial smoke stacks are a major national concern due to both health concerns and climate change. As a consequence, there are at least tens of gas analyzer manufacturers in the U.S. alone that compete in that market and have done so for years. What CIC Photonics brings to that competitive field is its expertise derived from its Combustion Efficiency Solution and its high performance IRGAS Systems. The IRGAS-CEM provides real-time and simultaneous measurements of the multitude of ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
The company’s entry into the electronic specialty gas market originated in 1994-95 as a consequence of the semiconductor industry’s demand for increasingly higher purity gases from the major gas producers. The issue was then and remains today to be primarily moisture impurity levels in the cleaning, etching, and treatment gases used in wafer production. In that earlier period when common wafer sizes were 6” and 12”, the semi industry required moisture concentrations to be 250 to 500 ppb or better; with each year ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
CIC Photonics has made its mark with several R&D institutes where research is underway to determine the optimum thermodynamic performance of new turbine engine designs combined with new diesel fuel formulations. This sophisticated IRGAS technology has included not only a basic FTIR gas analyzer but also analyzers for H2, O2, THC, and a powder meter all integrated into a comprehensive IRGAS ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Solar technology as a renewable energy technology is spreading around the world, with major manufacturing operations occurring in China, Germany, Spain, and the U.S. For solar photovoltaics, specialty chemicals are required for the production of the photovoltaic ...
ByCIC Photonics based in Albuquerque, NEW MEXICO (USA)
Comparison of Technologies A gas chromatograph (GC) has traditionally been the technology of choice for laboratory analysis of gas samples. GCs have been used for over 50 years in the qualification and quantification of complex mixtures of gases. The techniques and methodology required to run GCs are often a pre-requisite for any laboratory technician. Recent developments in Fourier Transform Infra-Red (FTIR) gas analysis has enabled this technology to start to replace GCs in the ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Composition of Natural Gas, Syngas via VOC Speciation The composition of fuel gas is important in order to determine calorific value and also to detect any unwanted contaminants in the gas. Online analysis is important in order to give real-time and direct action on ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Formaldehyde (HCHO) is the simplest aldehyde species and is present, or generated by, many sources (both natural and industrial). It is classed as a substance that is toxic and harmful to human ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). ...
ByShimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA)
Closed chamber gas flux measurements can be made with Protea FTIR analysers to allow researchers in the field of atmospheric gas analysis from agricultural and livestock to measure evolved gases such as N2O, CO2, CO, NH3, and CH4. Nitrous oxide (N2O) and Methane (CH4) emissions from soil, plant and livestock are especially important gases to measure, given their high potential as greenhouse gases (GHGs). NH3, whilst not a greenhouse gas on the scale of N2O, CH4 and CO2, is a major emission from agricultural, such ...
ByProtea Limited based in Middlewich, UNITED KINGDOM
Power lines. Cell towers. Oil and gas pipelines. Railways– all of these and so many other types of industrial inspection are made easier, safer, and more efficient with Microdrones EasyOne fully integrate high-performance drones with advanced TrueView LiDAR sensors and LP360 data processing software. ...
ByMicrodrones GmbH based in Madison, ALABAMA (USA)