- Home
- Applications
- particulate emissions
Refine by
Particulate Emissions Product Applications
57 applications found
For smelters, new furnace size can be reduced or the efficiency of existing furnaces can be increased all while reducing NOx and particulate ...
ByAdsorptech based in Middlesex, NEW JERSEY (USA)
Hydrometallurgical extraction of metals such as Nickel and Cobalt generate emissions of lethal gases such as Hydrogen Sulphide or Hydrogen Chloride. ...
ByMacrotek Inc. based in Markham, ONTARIO (CANADA)
Regulations around the globe are becoming more and more stringent for particulate emissions. Macrotek offers some of the most efficient wet and dry technologies to meet the latest EPA, EU, and MOE standards. Often, particulate collection is combined with acid gas removal. Our most advanced wet-dry system meets and exceeds the most stringent regulations for both hazardous gases and ...
ByMacrotek Inc. based in Markham, ONTARIO (CANADA)
Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. ...
ByAll Power Labs based in Berkeley, CALIFORNIA (USA)
Variable-throat venturis provide constant particulate emissions control even in varying process conditions. WESPs are often required to meet fine particulate emission regulations, and absorption stages are added to the system to remove gaseous ...
ByAirPol based in Pittsburgh, PENNSYLVANIA (USA)
Production of fiber optics create gaseous and sub-micron particulate emissions that are extremely valuable to recapture. A major fiber optic manufacturer has purchased multiple scrubber systems from the Clean Air Group, LLC to not only meet air emission standards but to capture this valuable product. Not only has the Clean Air Group, LLC APC system reduced the customer’s emissions to bring them into regulatory compliance, but the high ...
ByCR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA)
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. ...
ByAll Power Labs based in Berkeley, CALIFORNIA (USA)
Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. ...
ByAll Power Labs based in Berkeley, CALIFORNIA (USA)
Oxygen is used during a furnace campaign to increase throughput, at the end of a furnace campaign to extend the useful life and reduce total emissions, and for new furnaces maximize throughput return on investment (ROI). In all cases, energy use, NOx and particulate emissions are reduced. Every type of glass, from beer bottles to sophisticated computer flat glass, has seen extraordinary quality benefits with the increased use of VPSA oxygen.For fiberglass and ...
ByAdsorptech based in Middlesex, NEW JERSEY (USA)
Particulate matter emissions can come from many sources. Indoor emissions from cooking, heating, and infiltration through leaky doors, windows and/or poorly filtered HVAC systems can cause elevated exposures indoors and can play a role in health ...
ByAethlabs based in San Francisco, CALIFORNIA (USA)
Ensuring the safe and stable operation of the bag dust removal system through bag leakage monitoring has a very important impact on the particulate matter emissions and overall operations of the ...
ByHorizon Tek Services based in , UNITED KINGDOM
Dekati measurement solutions for determination of particulate emissions from engines include both particle detection and sample conditioning solutions. For non-road and off-road emission measurements, we have complete measurement solutions both upstream and downstream exhaust after-treatment devices. The exhaust sample conditions in marine and aircraft engine emission measurements may vary a lot depending on the type of engine, type of fuel and ...
ByDekati Ltd. based in Kangasala, FINLAND
Disposal by gasification also has far lower particulate emissions than controlled burns and a lower carbon footprint than decomposition, since methane emissions from anaerobic decomposition are avoided. ...
ByAll Power Labs based in Berkeley, CALIFORNIA (USA)
Control chlorine and chlorine dioxide emissions from bleaching operations. Brown stock washer emissions. Control particulate emissions from lime kilns, lime slakers, black liquor recovery boilers, furnaces and gasification units. Particulate from bark and sludge and fired boilers and sulfur dioxide and trioxide removal from those sources. Control of hydrogen sulfide, TRS and methanol emissions from LVHC and HVLC ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
STEEL INDUSTRY: Conducted particulate testing and continuous emission monitoring of a rod mill exhaust stack. In addition, testing was performed to determine emissions associated with a slow cooling pen associated with ball mill ...
ByAirSource Technologies, Inc. based in Shawnee, KANSAS (USA)
From Aluminum to Zinc in the Metals Industry, Bionomic offers an extensive line of field proven equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
Removal of particulate, acid gases and NOx emissions from glass furnaces. Particulate control on glass and ceramic material dryers and ...
ByBionomic Industries Inc based in Mahwah, NEW JERSEY (USA)
In recent years, new regulations have been introduced governing emissions from ships. With the International Maritime Organization (IMO) adopting Annex VI of MARPOL designed to limit sulphur oxides (SOx), nitrous oxides (NOx) and particulate matter emissions, as well as introducing emission control areas (ECAs) to reduce emissions of those air pollutants further in designated sea areas, ship owners/operators can face hefty fines ...
ByDynoptic Systems Ltd - ACOEM Group based in Banbury, UNITED KINGDOM