- Home
- Applications
- spectrometer
Refine by
Industries served
- Metal
- Energy
- Monitoring and Testing
- Plastics & Resins
- Air and Climate
- Oil, Gas & Refineries
- Environmental
- Food and Beverage
- Medical / Health Care
- Mining
- Agriculture
- Construction & Construction Materials
- Paint
- Automobile & Ground Transport
- Electronics and Computers
- Forestry & Wood
- Soil and Groundwater
- University / Academia / Research
- Manufacturing, Other
- Aerospace & Air Transport
- Chemical & Pharmaceuticals
- Defense
- Waste and Recycling
- Communications / Telecom / Datacom
- Water and Wastewater
- Publishing / Media / Marketing
Spectrometer Product Applications
202 applications found
Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no ...
ByIUT Technologies GmbH based in Berlin, GERMANY
The study of Protein Fluorescence is an important area of research in biology and biophysics. Red-edge fluorescence spectroscopy of polar fluorescence probes is a powerful method to study the structure and dynamics of phospholipid membranes, micelles and ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
The Matrix LIMS Nuclear Monitoring Solution is a versatile, comprehensive LIMS solution that is available for district survey, liquid discharge, gaseous discharge and chemistry applications. It is a highly configurable software system, suitable for environmental and chemistry applications within the nuclear power generation industry. It applies to both generating stations and during decommissioning. Access to the system is controlled by a comprehensive security system utilising a class based structure relating to ...
ByAutoscribe Informatics based in Reading, UNITED KINGDOM
A powerful method for determining the kinetics of a reaction is by monitoring the concentration of the reactants or products over time using stopped-flow fluorescence spectroscopy. In this application note, the kinetics of NATA quenching by QBS are ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Single-Wall Carbon Nanotubes (SWCNT) can be described as quasi-one dimensional structures of graphene. Due to their low dimensional structure, their optical and electronic properties are directly connected to their size. Steady-state fluorescence ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Efficient extraction of charge carriers is critical for the creation of high-efficiency solar cells. Photoluminescence is proportional to the number of charge carriers in the perovskite and therefore sensitive to charge transfer into adjacent layers ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Liquid scintillator detectors are widely utilised in neutrino and astroparticle detection experiments. One liquid scintillator that is increasingly being used in large scale detection experiments is linear alkylbenzene (LAB). LAB is an attractive ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Aerosol particles are ubiquitous in ambient air and are of great importance to human and environmental health, climate change, and many industrial processes. The ability to measure their chemical composition is essential to understand the sources of aerosols, their chemical properties, and their potential ...
ByTofwerk AG based in Thun, SWITZERLAND
Acoustic spectroscopy is a very simple method for sizing of nanoparticles. There are many examples published in the papers that are listed below. There is only one input parameter characterizing particles required for calculating particle size distribution at this size range – density of particles. A big advantage of Acoustics over light-based methods is ability of characterizing broad particle size distributions, which include nano-size fractions. Our recent studies show that Acoustics could monitor ...
ByDispersion Technology, Inc. (DTI) based in Bedford Hills, NEW YORK (USA)
In order to ensure that an industrial process can be controlled or even improved and optimized continually an analysis of the current situation in real time is necessary. Process data like temperature, pressure but also particle concentration and size distribution of a material flow can supply valuable information and be used for the regulation or the improvement of a ...
ByPalas GmbH based in Karlsruhe, GERMANY
Introduction: Chlorodimethylether (CMME) and Bis Chloromethyl-ether (BCME) as well as Ethylene dichloride (EDC) and Methylene chloride (DCM) are well known as carcinogenic substances, like other chlorinated hydrocarbons. BCME is also very toxic. These particular chemicals are widely used in the world of chemical industry, especially in the production process for ion exchange resins. CMME in that case acts as a precursor for those resins while BCME is generated as an impurity which cannot be ...
ByIUT Technologies GmbH based in Berlin, GERMANY
Single-wall carbon nanotubes (SWCNTs) have unique electrical, thermal, mechanical, and optical properties which make them attractive for a wide variety of applications; ranging from drug delivery to battery electrodes. In this application note the ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Used catalytic converters are collected and recycled in order to reclaim the precious metals Pt, Rh and Pd. Typically, the entire honeycomb core is removed and ground into fine powder. Once in powder form, the precious metal catalysts can be extracted, or the powder can be sold to a refiner. The honeycomb core is typically ceramic, containing combinations of the elements Al, Si, Fe, Zn, Sr, Zr, Ba, La and Ce. Some cores can be made of a stainless steel honeycomb and so would contain higher Fe and other metals. ...
ByApplied Rigaku Technologies based in Cedar Park, TEXAS (USA)
Inorganic phosphors are widely used in lighting and display technologies and their emission properties are commonly characterised using photoluminescence spectroscopy. Phosphors generally operate at elevated temperatures and it is therefore important to ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Copper, denominated on account of its characteristic purplish-red hue, pertains to industrial-grade pure copper. It exhibits a melting point of 1083 °C and a relative density of 8.9, which is fivefold that of magnesium. Copper is distinguished by its outstanding electrical and thermal conductivity. In terms of electrical conductivity, it is surpassed only by silver, endowing it with extensive applicability within the electrical industry. It is prevalently utilized in the fabrication of electric wires, cables, and ...
ByEfficiency Scientific Instrument Co., Ltd (ESI) based in SuZhou City, CHINA
Offshore installations, whether it’s a drilling rig, production platform or FPSO, have some of the most testing operating environments possible. Operators must combine the drive to efficiency with their environmental commitments. Whatever analyzer you choose should not only match your needs and add value but must not take up valuable resources whether that’s personnel or consumables. ...
ByAdvanced Sensors Ltd. - part of PAC L.P. based in Carrickfergus, UNITED KINGDOM
Graphene has received tremendous attention within both the scientific community and industry due to its remarkable electrical, thermal and mechanical properties. In this application note, the photoluminescence properties of graphene oxide are ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Photocatalysis is the rate increase of a chemical reaction by light, often in the presence of a catalyst that starts the reaction upon irradiation. Photocatalysts are typically semiconducting metal oxides such as ZnO, Fe2O3 or TiO2 which are employed as ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Persistent luminescence, commonly called afterglow, is long-lasting visible emission over several hours after ultraviolet excitation. It has many applications; ranging from glow-in-the-dark signage to in-vivo imaging for disease diagnosis and treatment. ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM
Förster resonance energy transfer (FRET) is a phenomenon of non-radiative transfer of the optical excitation from an excited electronic level of one molecule, called the donor, to a resonant electronic level of another molecule, called the acceptor. In ...
ByEdinburgh Instruments - TECHCOMP Group based in , UNITED KINGDOM