- Home
- Applications
- canada
- sample preparation
Refine by
Sample Preparation Product Applications In Canada
63 applications found
This method uses a suspension of ground plant material to directly measure the potassium concentration. It eliminates the usual steps of ashing and subsequent dissolution of the resulting ash. The method was compared to alternative methods such as chemical analysis and spectrophotometric methods. Collaborative studies using a range of samples gave a mean of 1.74% potassium by this extraction technique as compared to 1.75% by alternative methods. The standard deviation of an analysis in the two different sample ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
A number of methods have been reported for the measurement of calcium in biological materials by flame photometry or titration. This method employs trichloroacetic acid (TCA) to precipitate the proteins and has been found to be adequate to extract all of the calcium from tissue samples. Sodium, potassium and phosphate caused no significant interference and calcium concentration in the range of 0 to 2 µg/ml is readily determined. ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Plastics, polymers and rubber are combined with a variety of different additives in order to give them properties that are important for many different markets. These products are commonly analyzed as beads, which in their end form are pressed or molded into ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
Xenemetrix advanced ED-XRF spectrometers provide on-site quantitative analysis of mining products, thereby reducing the time for receiving results from days to seconds, compared to time consuming laboratory analysis. Materials recovered by mining, minerals or other geological materials that originate from the earth consist of all kinds of base metals - precious metals, iron, uranium, coal, diamonds, limestone, oil shale, rock salt and potash - all of which can be efficiently analyzed by Xenemetrix outstanding ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
In most cases, it was found that flame photometry was well suited for the determination of sodium, potassium and calcium in fresh fruits, using the wet ashing technique as given below. There are significant differences in the composition between different varieties of the same fruit, although these differences are not usually considered to be nutritionally ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Dried milk was dissolved into an aqueous solution for analysis via flame photometry. The test solutions and reference solutions are measured directly following dilution with deionised distilled ...
ByBWB Technologies Ltd. based in  Newbury, UNITED KINGDOM
Quality control of coating and thin film analysis All industrial operations have processes in place to ensure efficiency and safety standards. Xenemetrix systems are perfectly suitable for complementing these ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
Wood treatment used to protect lumber from fungi, insects, UV damage, water damage and general wear. When treating wood the proper balance of treatment solution must be monitored to ensure the highest quality while minimizing waste and excess cost due to treatment usage or product ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
Analysis of sulfur in oil and petroleum products, such as gasoline, diesel fuel, motor and transmission oils, is one of the most important tasks. Utilizing a reliable sulfur analyzer is crucial in this context, as it ensures that the sulfur content meets the stringent regulations set forth by authorities. Sulfur forms sulfites in car exhausts, which pollute the environment. The maximum permissible level of sulfur in fuel is reduced yearly. The Directive 2003/17/EC (or EURO VI) requires that the sulfur content of ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
Compliance with the ASTM method at low concentrations sulfur. Sulfur is a major element of importance because it forms sulfuric acid in the atmosphere when burned and has harmful impact on the human health and on the environment. In the mid-2000's, the Environmental Protection Agency (EPA) began a program to greatly reduce the amount of Sulfur in petroleum products. The current allowable sulfur limit in vehicle fuel is 15 ppm (parts per million). To reduce the pollution coming from vessels the international ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
High-sensitivity and simultaneous analysis of Psychoactive drugs using LC-MS/MS with full-automated pretreatment ...
ByShimadzu Scientific Instruments Inc based in  Columbia, MARYLAND (USA)
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Oil and fuel analysis - compliance with ASTM standard methods and other regulations. Xenemetrix state-of-the-art ED-XRF analyzers offer solutions for the Petroleum & Petrochemical analysis that comply with ASTM standards and regulations. Our superior solutions cover the full production process, starting from research & development up to process and quality ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
The pharmaceutical industry is one of the most regulated industries. Contaminants in drug products are examined throughout the manufacturing process, since their presence affects drug stability, behaviour and toxicity. Therefore, regulatory bodies such as the European Medicines Agency (EMEA) and the American Food and Drug Administration (FDA) strictly enforce continuous and ongoing analysis of organic or inorganic impurities from raw materials, excipients and Active Pharmaceutical Ingredients (API) through ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
The Food & Beverage industry is a wide-scale and versatile industry, which is enforced by strict standards and regulations that makes it an ideal potential for the ED-XRF analytical systems. Using ED-XRF allows measuring a wide range of elements C (6)-Fm (100), at different concentration in almost all matrices - solids, powders and ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
Shimadzu's Cannabis Testing Solutions cover a broad range of applications, from potency testing to pesticide screening. We supply the instruments, methods and experience necessary to get you up and running quickly. Shimadzu scientific instruments have been applied to natural products, food sciences, pharmaceuticals and environmental testing for decades. Whether you are a chromatography expert or a novice, our platforms and training ensure that your laboratory will generate quality results from a wide variety of ...
ByShimadzu Scientific Instruments Inc based in  Columbia, MARYLAND (USA)
Air pollution, soils, grounds and wastewater Xenemetrix Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers bring expanded capabilities to environmental monitoring through the combination of proven detection methods with innovative technologies, including regulatory monitoring for compliance and ...
ByXenemetrix Ltd. based in  Migdal Haemek, ISRAEL
The Situation: California is currently facing one of the most severe droughts in recorded history. In order to mitigate the drought conditions, various water conservation measures have already been implemented, and others are being considered. One method under consideration is using the advanced treatment of produced water to make it available for irrigation. A major challenge to the success of this method is economically treating the produced water to achieve the quality mandated by California’s irrigation ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in  Edmonton, ALBERTA (CANADA)
Positive Material Identification is the detection of materials through non-destructive element spectrometry in samples of metals, steel, and alloys, which is used to check the component composition of ores, soils, and other liquid and powder samples. This technology is widely used in various industries, numerous research, and academic laboratories worldwide due to the quickness and accuracy of the analysis. XRF PMI machine is usually used for these purposes. ...
ByElvatech Ltd. based in  Kyiv, UKRAINE
The Situation:Power plants and paper mills use service water loops and mill water loops respectively for the cooling of lubricating, hydraulic, turbine and transformer oil. These cooling systems feature large, recirculating volumes of water which are treated with biocides, dispersants, and corrosion inhibitors. By comparison, refineries often use once through cooling water systems. The cooling water is taken from lakes, rivers, or the ocean and circulated once through the plant to cool processes. Large volumes of ...
ByBenchmark Measurement Solutions (formerly Turner Designs Hydrocarbon Instruments) based in  Edmonton, ALBERTA (CANADA)