Refine by
Industries served
- Chemical & Pharmaceuticals
- Food and Beverage
- Manufacturing, Other
- Water and Wastewater
- Monitoring and Testing
- Oil, Gas & Refineries
- Medical / Health Care
- Waste and Recycling
- Energy
- Agriculture
- Air and Climate
- Environmental
- Construction & Construction Materials
- Mining
- Metal
- Pulp & Paper
- Automobile & Ground Transport
- Soil and Groundwater
- Electronics and Computers
- Aerospace & Air Transport
- Glassware
- Health and Safety
- Commercial
- Plastics & Resins
- Defense
- Communications / Telecom / Datacom
- University / Academia / Research
- Packaging
- Maritime/Shipbuild/Water Transport
- Travel & Leisure
- Paint
- Printing
- Banking & Finance / Insurance / Legal
- Forestry & Wood
- Textile
- Government
- Dry Cleaning
- Logistics
- Retail
- Household Appliances
Xprt Product Applications In Germany
3,851 applications found
Introduction: PFIB (Perfluorisobutlyene) is a gaseous compound from the group of Fluorinated Hydrocarbons. It is very toxic at ppb- concentrations already, inodorous, colorless, flavorless, heavier than air and very stable. The effects of intoxication can occur hours or even days after exposition. Thus, it is very dangerous. In specific processes in the chemical industry this compound is produced as un- wanted by product, such as the production of PTFE (Teflon), which cannot be avoided. Since there’s no ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Introduction: Phosgene is the common name for Carbonic Dichloride, a gaseous compound. It is very toxic at ppb- concentrations already. Phosgene is a very important precursor in the chemical industry for the production of e.g. polyurethanes, pharmaceutics colors, etc. and therefore widely used. Even though it is handled in hermetic closed systems only, several generators for Phosgene are in operation worldwide to at least avoid all risks caused by transportation also. The effects of intoxication can occur hours or ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Introduction: TCP (1,2,3- Trichloropropane) and DCP (2,3- Dichloropene) are liquid compounds from the group of Chlorinated Hydrocarbons, defined as carcinogenic and mutagenic at low concentrations already. Due to the pretty high vapor pressure of these liquids, a significant health- risk is created by handling. TCP and DCP are widely used as chemical precursors in production processes for the synthesis of various products, such as chlorinated solvents and Agrochemicals. Furthermore DCP is also used as a ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Airborne Molecular Contamination (AMC) is a general term for existing molecular contaminations in clean room environments. These compounds belong to very different groups with very different mechanisms of damage. AMC is a concern for any high technology manufacturing process, especially in the microelectronic industry and is getting more and more in the focus of interest. AM-contaminations may cause adverse effects on production tools and consequently increase costs for high-tech companies. These airborne ...
ByIUT Technologies GmbH based in  Berlin, GERMANY
Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal's EyeCGas Optical Gas Imaging camera, for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in ...
ByOPGAL based in  Karmiel, ISRAEL
ByHORIBA Europe GmbH based in  Leichlingen, GERMANY
CO (carbon monoxide) and CO2 (carbon dioxide) are generally measured to ensure process control. CO2 is the desired product and CO is undesired in combustion since it will explode in high enough concentrations. CO2 and CO concentrations can also be used to determine other process-specific efficiencies. Continuous emissions monitoring equipment that can be calibrated as a CO and CO2 analyzer is thereby essential for process ...
ByUnisearch Associates Inc. based in  Concord, ONTARIO (CANADA)
LaserGas measurements Boiler combustion control, O2 and CO DeNOx system, NH3 and NO Electrostatic precipitators (ESP), CO monitoring for explosion prevention Stack gas emissions, NH3, H2O, NO Coal silos, CO monitoring for explosion prevention and detection of smouldering fires (only in coal fired plants) LaserDust measurements Stack gas emission Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in  Skedsmokorset, NORWAY
LaserGas measurements Preheater exit, CO monitoring Electrostatic precipitators (ESP) after pre-heaters, CO monitoring for explosion prevention Coal silo, CO monitoring Exit of coal mill, dust filter, CO monitoring Stack gas emissions, HCl and HF LaserDust measurements Stack gas emissions Coal silo, explosion prevention ...
ByNEO Monitors - a Nederman company based in  Skedsmokorset, NORWAY
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Waste-to-energy (WtE) or energy-from-waste (EfW) through incineration of waste is on the one hand an effective way of producing electricity and heat, while on the other hand it is disposing of possibly hazardous or unrecyclable waste. Its purpose is not to compete with waste recycling, reuse and prevention, but to complement them. After all, incineration not only reduces the amount of hazardous waste, but may also generate energy through the gases released in the process. Read about our solutions for ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
In the semiconductor manufacturing industry, various perfluorinated compounds (PFCs) are used. The emissions of the PFC compounds into the ambient air are reduced by scrubbing of the exhaust gases from the process. In this process, the Gasmet™ FTIR Gas Analyzers can be used to measure the emissions into the atmosphere and also monitor the efficiency of the scrubbers. Typically monitored PFCs in the exhaust gas include carbon tetrafluoride CF4, trifluoromethane CHF3, and hexafluoroethane ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
ByAMETEK Process Instruments based in  Pittsburgh, PENNSYLVANIA (USA)
Continuous Emissions Monitoring Systems (CEMS) are used to measure flue gases from stationary sources at a wide variety of regulated industrial facilities, including power plants, petroleum refineries, petrochemical plants, waste incinerators, pulp and paper producers, and many others. The types of air pollution measured from these sources vary widely based on the industry and process, and many are regulated by government agencies around the ...
ByTeledyne API based in  San Diego, CALIFORNIA (USA)
For large combustion plants and power plants we offer the DCEM 2100 particulate monitor. This monitor is certified to EN 15267 part 3 QAL 1 for all industrial processes including waste incineration. It offers outputs in Transmission, Opacity and mg/m3 (when calibrated against a Standard Reference Method). The DCEM 2100 offers real-time zero and span calibration and an efficient air purge system to prevent optical ...
ByCodel - a Forbes Marshall company based in  Bakewell, UNITED KINGDOM