- Home
- Applications
- italy
- emissions control
Refine by
Emissions Control Product Applications In Italy
73 applications found
The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and ...
ByEmiControls based in  Bolzano, ITALY
Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of ...
ByEmiControls based in  Bolzano, ITALY
High volumes of dust, often extending over large areas, present a major challenge for the operators of opencast mines and quarries. If conditions are also dry and windy, the dust will affect not only the workforce but also, in many cases, entire housing estates in the vicinity. The sources of dust in surface mining areas are often distributed over very large expanses, with dust originating from various places. With their large projection range, EmiControls dust controllers are ideal for such applications. Mobile ...
ByEmiControls based in  Bolzano, ITALY
Firefighting operations at airports are particularly critical as they normally involve rescuing people. The large quantities of aviation fuel make it a very high-risk activity with intense heat ...
ByEmiControls based in  Bolzano, ITALY
Demolition work and the dust it generates is a big problem for residents and the environment when work is carried out in residential areas. EmiControls offers the right dust control solution for every type of demolition work, thereby protecting the inhabitants, neighboring buildings and the environment. Because the source of dust can move constantly during the demolition process, mobile solutions are ideal as they can be positioned and pivoted easily and quickly. And they can be removed from the site when the work ...
ByEmiControls based in  Bolzano, ITALY
Today, steel production is becoming more and more technology intensive. Advanced control systems are under continuous development and large potentials to exploit their benefits therefore exist. The control systems optimize process operations leading to reduced processing time, reduced maintenance costs, increased energy efficiency, improved product quality and consistency as well as better emission ...
ByFocused Photonics Inc. (FPI) based in  Hangzhou, CHINA
The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and ...
ByEmiControls based in  Bolzano, ITALY
Tri-Mer Corporation is a leader in air pollution control, with more than 6,000 installed APC systems worldwide. Tri-Mer is also the leader in equipment for removing PM, SO2, and NOx from large-scale stationary diesel operations. Tri-Mer’s UltraCat Catalytic Filter system is the world’s premier dry technology for PM+ SO2+ ...
ByTri-Mer Corporation based in  Owosso, MICHIGAN (USA)
Raw gases are untreated flue gases that have not passed through an emissions control technology system like selective catalytic reduction (SCR) or selective non-catalytic reduction (SNCR). They are generally measured for the sakes of process control and warranty tracking. Typically only a few components are measured but fourier transform infrared spectroscopy FTIR technology allows the measurement of all ...
ByGasmet Technologies - a Nederman company based in  Vantaa, FINLAND
Premium
The ceramic industry demands enormous amounts of energy for the drying processes of various material, including clay, glass, brick, tiles and fixtures. The best way to improve the efficiency of ceramic manufacturing is to connect a gas turbine to the spray dryer, providing heat along with electrical power for the ...
BySolar Turbines Incorporated (STI) based in  San Diego, CALIFORNIA (USA)
Premium
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Companies across the globe are setting carbon reduction goals to reduce GHG emissions. Displacing carbon intensive energy sources with hydrogen reduce the introduction of atmospheric CO2. The products of combustion of oxygen with any hydrocarbon produce CO2 in the reaction while hydrogen combustion only produces water. Increasing demands from many end users such as universities and larger industrial facilities provide further motivation for reducing carbon footprint, but still supplying reliable electricity and ...
BySolar Turbines Incorporated (STI) based in  San Diego, CALIFORNIA (USA)
Premium
Solar Turbines provides sustainable energy solutions to help utility companies and industries around the world find the perfect balance between affordable, flexible, efficient, and reliable power. As global energy demand increases, it is critical that resilient systems are available to ensure our customers have reliable power when needed. As the energy industry continues to evolve around regulatory goals to reduce emissions, energy providers are often met with constraints. To help customers meet sustainability ...
BySolar Turbines Incorporated (STI) based in  San Diego, CALIFORNIA (USA)
Premium
The high temperatures in glass manufacturing can make it difficult to monitor gas concentrations for process control and emissions monitoring. However, OPSIS offers monitoring systems that handle the high temperatures in an excellent way. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Demanding monitoring environment at cement industries. Process control and emissions monitoring at a cement plant can be a challenge due to high dust levels and corrosive gases. ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
This requires accurate monitoring to ensure product quality, optimize process yield and control ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
OPSIS offers monitoring systems for continuous emissions monitoring and process control at power plants. The systems meet and exceed high demands on availability, speed, versatility, and low operating ...
ByOPSIS AB based in  Furulund, SWEDEN
Premium
Processes for refining platinum metal. Platinum is the best known and most widely used of the platinum group of elements on the periodic table. Platinum is silver-white in colour, corrosion resistant, and has a high melting point. ...
ByLAND® based in  Dronfield, UNITED KINGDOM
Premium
Processes for refining nickel metal. Nickel is recognised for its exceptional strength, corrosion resistance, and high melting point, making it a valuable metal in various industrial applications. ...
ByLAND® based in  Dronfield, UNITED KINGDOM
KEMFLUID WAXES (SYNTHETIC WAXES) – Especially designed additives for modification of base bitumen in bituminous roofing rolls as well as asphalt, helping to control viscosity of hot-mix at a lower working temperature, also reducing the emissions during the mixing and laying process. ...
Byltalmatch Chemicals Group based in  Genova, ITALY