- Home
- Applications
- spain
- emissions control
Refine by
Emissions Control Product Applications In Spain
76 applications found
Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of ...
ByEmiControls based in Bolzano, ITALY
The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and ...
ByEmiControls based in Bolzano, ITALY
High volumes of dust, often extending over large areas, present a major challenge for the operators of opencast mines and quarries. If conditions are also dry and windy, the dust will affect not only the workforce but also, in many cases, entire housing estates in the vicinity. The sources of dust in surface mining areas are often distributed over very large expanses, with dust originating from various places. With their large projection range, EmiControls dust controllers are ideal for such applications. Mobile ...
ByEmiControls based in Bolzano, ITALY
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Firefighting operations at airports are particularly critical as they normally involve rescuing people. The large quantities of aviation fuel make it a very high-risk activity with intense heat ...
ByEmiControls based in Bolzano, ITALY
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Steel and ferroalloys manufacturing processes involve high temperature exhaust streams, often at more than 900ºC. Typically, the gas flows from the furnace (usually electric arch type) and goes into a gas conditioning tower to cool down below 200ºC so that it can be treated by a Bag Filter. It's also common to have ESP´s as end dedusters that can be preceded by a multicyclone serving as ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Demolition work and the dust it generates is a big problem for residents and the environment when work is carried out in residential areas. EmiControls offers the right dust control solution for every type of demolition work, thereby protecting the inhabitants, neighboring buildings and the environment. Because the source of dust can move constantly during the demolition process, mobile solutions are ideal as they can be positioned and pivoted easily and quickly. And they can be removed from the site when the work ...
ByEmiControls based in Bolzano, ITALY
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
For PM emission control in high temperature exhaust streams, such as those from fuel oil boilers, common dedusters like bag filters, have very high maintenance costs. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Dürr is a long-recognized, trusted supplier of liquid atomization technologies and emissions control solutions for the cement ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The drying of biomass is common to many industries, including wood pellet making, panel boards and many others, from coffee to olive-oil or animal feed. Technologically, these industries operate drum / rotary dryers to dry biomass. It can be a raw-material or a fuel for the manufacturing process. The pellet making industry presents a typical general arrangement which is replicated in other industries. It includes a “dryer” cyclone after a rotary dryer which is heated by a furnace (generally burning ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Pharmaceutical emissions control requires a thorough knowledge and understanding of the process and system requirements, combined with the ability to provide custom solutions. ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Calcination is a process that involves heating a substance, typically a solid material, at high temperature with limited supply of air or oxygen. The purpose of calcination is to remove volatile components and drive off impurities or to transform the material into a more desirable form for further ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The treatment processes in recycling plants generate unpleasant and often harmful dust, which is a health hazard not only for nearby residents, but particularly for the employees. More and more legislation is being passed on dust control requiring such in the form of mobile units or fixed installations. In composting processes, the dust problem is compounded by unpleasant odors, which can be controlled effectively with specialized equipment. The same units are also used in biogas plants or for the removal and ...
ByEmiControls based in Bolzano, ITALY
Burning biomass and or coal releases particulate matter (PM) to the atmosphere, polluting the surroundings and harming the human health. PM emissions is a common problem in industries that operate furnaces or boilers to generate heat or steam for their processes or for electricity generation to be sold to the grid. The general arrangement of a biomass or coal combustion plant includes a cyclone pre-separator to reduce the concentration of particles after the boiler and a final dedusting ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Separating particles from the air at high temperature serves multiple needs that go from thermal energy recovery in several industries to improving the economics of power and incineration ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Premium
The ceramic industry demands enormous amounts of energy for the drying processes of various material, including clay, glass, brick, tiles and fixtures. The best way to improve the efficiency of ceramic manufacturing is to connect a gas turbine to the spray dryer, providing heat along with electrical power for the ...
BySolar Turbines Incorporated (STI) based in San Diego, CALIFORNIA (USA)