- Home
- Applications
- usa ohio
- emissions control system
Refine by
Emissions Control System Product Applications In Ohio
17 applications found
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Steel and ferroalloys manufacturing processes involve high temperature exhaust streams, often at more than 900ºC. Typically, the gas flows from the furnace (usually electric arch type) and goes into a gas conditioning tower to cool down below 200ºC so that it can be treated by a Bag Filter. It's also common to have ESP´s as end dedusters that can be preceded by a multicyclone serving as ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
For PM emission control in high temperature exhaust streams, such as those from fuel oil boilers, common dedusters like bag filters, have very high maintenance costs. The diesel and fuel oil fly ash can be quite sticky and clog to filter elements, which can be minimized with costly protection reagents or frequent filter elements changes. Fuel gas cooling is needed in front of the filter when temperatures are higher than ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Glass and ceramic furnaces are typically associated with emissions of very fine particles (less than 5µm) in combination with high temperatures and load. An increasingly higher number of furnaces are powered with biomass fuel, further raising the level of particulate emissions that need to be treated, in order to comply with stricter regulatory limits. Solving this problem may or not require a two stage dedusting system such a cyclone pre-separation system followed by an ESP. Client's needs ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
The drying of biomass is common to many industries, including wood pellet making, panel boards and many others, from coffee to olive-oil or animal feed. Technologically, these industries operate drum / rotary dryers to dry biomass. It can be a raw-material or a fuel for the manufacturing process. The pellet making industry presents a typical general arrangement which is replicated in other industries. It includes a “dryer” cyclone after a rotary dryer which is heated by a furnace (generally burning ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Burning biomass and or coal releases particulate matter (PM) to the atmosphere, polluting the surroundings and harming the human health. PM emissions is a common problem in industries that operate furnaces or boilers to generate heat or steam for their processes or for electricity generation to be sold to the grid. The general arrangement of a biomass or coal combustion plant includes a cyclone pre-separator to reduce the concentration of particles after the boiler and a final dedusting ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Dürr is a long-recognized, trusted supplier of liquid atomization technologies and emissions control solutions for the cement ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Separating particles from the air at high temperature serves multiple needs that go from thermal energy recovery in several industries to improving the economics of power and incineration ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Dürr Universal is a global leader in the design, manufacture and installation of gas turbine silencers and gas turbine filter systems. Dürr Universal provides inlet silencers and exhaust stack silencer solutions for gas turbines and diesel engines used for stationary and portable power generation ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Dürr offers a wide range of environmental solutions that include solvent recovery and distillation systems, thermal oxidizers, scrubbers and wet electrostatic ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Thermal decomposition processes (TD Processes), such as Pyrolisis, Incineration and Gasification are increasingly related with carbon capture, originated from several sources, from RDF to Biomass. CO2 is not solid and thereby it is impossible for it to be captured or filtered. However, several technologies are emerging for the conversion of biomass to fuels and thereby storing CO2 on a solid form. Bioenergy with carbon capture and storage (so called BECCS) is the process of using biomass, such as trees, crops, or ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL
Air and Gas Treatment: the Challenge Treatment of air and process gases typically has two fundamental drivers: regulatory compliance and/or product purity. Many industrial operations face increasingly stringent discharge limits on volatile organic compounds (VOCs). From a process purity standpoint, many process gases contain undesired impurities that can be removed with Jacobi’s EcoSorb and AddSorb products. ...
ByJacobi Group based in Kalmar, SWEDEN
The building materials industry trusts Dürr's regenerative thermal oxidizer (RTO), wet electrostatic precipitator (WESP) and wet scrubber technologies to effectively control emissions, including volatile organic compounds (VOCs), hazardous air pollutants (HAPs), particulate matter (PM), and odors associated with the production of building materials. As an industry leader, Dürr offers a broad range of advanced air pollution control products to meet even the most stringent air emission regulations and odor ...
ByDürr Systems, Inc. based in De Pere, WISCONSIN (USA)
Calcination is a process that involves heating a substance, typically a solid material, at high temperature with limited supply of air or oxygen. The purpose of calcination is to remove volatile components and drive off impurities or to transform the material into a more desirable form for further ...
ByAdvanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL