- Home
- Equipment
- cuba
- applications
- undefined
Refine by
Applications
- Seismic borehole and surface solutions for Geophysical site characterization sector
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Chromatography laboratory instrumentation for feed industry
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Spray Drying & Encapsulation for researching
- Biofilm effect on Cooling Towers for Industrial Purpose
Undefined Equipment Supplied In Cuba
103 equipment items found
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The NIRFlex N-500 is the modular FT-NIR spectrometer that you need for reliable results for QC, R&D in applied science and various industries. The NIRFlex N-500 offers a wide range of measuring cells and accessories for flexible performance. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Pure Essential Chromatography system focuses on the essentials for any basic flash application. The design of the instrument, its modularity, and user-friendliness make it easy for you to take the first steps into automation and profit from increased speed and endless ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Impulse Generator IPG5000 (formerly named IPG1005) is the high voltage supply to the seismic borehole sources BIS-SH and SBS42. This generator is applicable for seismic tomography and crosshole tests in depths greater than 60 m. The energy is stored in a large capacitor bank, which discharges through a mechanical switch. The IPG5000 is controlled by a Remote Control Unit (RCU). The RCU allows ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Vibrator Source ElViS III is used to generate P- or S-wave sweep signals. It can be used for shallow seismic surveys. The source consists of a moving mass driven by a cascaded linear motor. The source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. The source is most suitable for reflection seismic surveys on ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Digital Multistation Borehole Acquisition System (MBAS-D) is a digital three-component geophone string used to receive P- and S-waves in dry or water filled boreholes. It can be used for S-wave borehole tomography or downhole surveying. Up to ten individual stations with tri-axial sensors can be connected. The system is especially designed for S-wave borehole tomography. S-wave tomography ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Analogue Multistation Borehole Acquisition System can be used for S-wave borehole tomography or downhole surveying. It consists of up to eight geophone stations each equipped with a tri-axial sensor. The string is fully water proof and can be used to receive P- and S-waves in dry or water filled boreholes. All geophone stations are aligned and mechanically connected by a torsional stiff hose ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Mini-Geophone M40 is used to receive P- and S-waves in horizontal boreholes. The borehole geophone consists of a tri-axial sensor. The geophone is coupled to the borehole wall by a pneumatic clamping system (inflatable bladder). Air is supplied to the M40 through the cable. The orientation of the M40 geophone is controlled from surface by a torsionally stiff hose. The cable is terminated by a ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The vibrator source Elvis VII is used to generate P- or S-wave sweep signals. The source consists of a moving mass driven by a cascaded linear motor. The source is fully cased. An adjustable pneumatic suspension ensures a maximum release of seismic energy under different surface conditions. The source is most suitable for reflection seismic surveys on paved roads and for urban areas. A ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Landstreamer LS-24 is used to record P-, S- or surface waves. The landstreamer is suitable for MASW or reflection seismic applications, especially on paved ground. It consists of several horizontally or vertically oriented sensors mounted on sledges which are attached to a robust belt. The belt can be hooked to a vehicle and moved along the profile. A landstreamer is used to collect a large ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Deviation Probe DevProbe1 is used to measure the borehole deviation. A three-axis magnetometer measures the azimuthal direction of the borehole and a dual tilt sensor provides information about the inclination. The probe is sealed and temperature compensated. Borehole deviation is required to determine the precise XYZ location of a seismic source or geophone inside a borehole. A software is ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The wireless trigger unit WTU1 is used to replace trigger cables if e.g. roads or rivers prevent a continuous seismic measurement. î¢e wireless trigger unit WTU1 works with nearly all impulse sources including sledge hammers. The wireless trigger unit WTU1 consists of two boxes which include the sender and the receiver unit. î¢e sender will be connected to the source and ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The hydrophone string BHC1000 is a fully digitized borehole receiver unit running on 4-conductor logging cable. The BHC1000 consists of max. 24 hydrophones moulded to a multicore cable. A digitization unit is placed on top of the string and can be connected to the standard 4-conductor logging cable. At surface a control unit is connected to the logging winch and directly to ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The borehole source BIS-SH generates horizontally polarized shear waves (SH) and compressional waves (P). This source is used for crosshole testing and S-wave tomography. The S-wave tomography links high-resolution borehole geophysics to soil dynamic properties. S-waves need to be generated with different polarization in order to be easily recognized during data processing. Due to its shorter ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The borehole geophone BGK5 is used to receive P- and S-waves in dry or water-filled boreholes. The geophone can be mainly applied for crosshole tests using the BIS-SH-DS seismic source and the generator IPG800 and downhole tests with e.g. a Sledge Hammer. This borehole geophone BGK5 consists of four horizontal sensors, separated by 45° intervals, and one vertical sensor. The geophone is ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The borehole geophone BGK3 is used to receive P- and S-waves in dry or water filled boreholes. This geophone can be mainly applied for crosshole tests using the BIS-SH S-wave source and the generator IPG5000 and downhole tests with a Sledge Hammer. The borehole geophone BGK3 consists of a tri-axial sensor whereas the BGK7 consists of six horizontal sensors, separated by 30° intervals, and one ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Impulse Generator IPG800 is the high voltage supply to the seismic borehole source BIS-SH-DS. This generator can be mainly used for crosshole test for shallow geotechnical investigations, mostly in depths until around 60 m. The energy is stored in capacitors, which discharge through a mechanical switch. The lightweight IPG800 is incorporated in a robust PeliTM case. The IPG800 is operated by ...
Manufactured by:Danish Clean Water A/S based inSønderborg, DENMARK
The T05 Extended system is based on the T00 Basis Unit with integrated dosing system with ORP-sensor, ORP-controller and dosing pump. The system was especially developed for the control of legionella in central water supply systems. The T05 Extended has a production capacity of 9 liter Neuthox® per hour disinfecting 50-60 m3 hot water per ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The BGK1000 is manufactured by Hinz Messtechnik GmbH and exclusively distributed by Geotomographie. It is a digital borehole geophone used to receive P- and S-waves in dry and water filled boreholes and applicable for downhole tests also for greater depths. ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The borehole source BIS-SH-DS generates horizontally polarized shear waves (SH) and compressional waves (P). The seismic signals are highly repeatable. The source works in dry or water filled boreholes and can be used in vertical or horizontal boreholes. Energy released by the IPG800 discharges through a system of coupled coils. They generate a mechanical impact to the borehole wall that releases ...
Manufactured by:Geotomographie GmbH based inNeuwied, GERMANY
The Dual Downhole System (DDS) is used to receive P- and S-waves in dry and water filled boreholes in order to determine interval velocities. The DDS consists of two stations each equipped with tri-axial sensors. The stations are mechanically connected to each other to ensure the alignment of all horizontal sensors. Both stations are coupled to the borehole wall by a pneumatic clamping system ...