Refine by
Astm Testing Method Articles & Analysis
63 articles found
Pipeline testing is essential for verifying the integrity of new or rehabilitated pipelines before they are open to service. In North America, ASTM standards such as ASTM C828, ASTM C924, and ASTM F1417 govern procedures for low-pressure air and hydrostatic ...
While the overall qualification of one sorbent’s ability to perform as compared to another sorbent may be determined by testing methods established by the ASTM standard F726-17 Standard Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills, this method ...
ByOHMSETT
Objective An in vitro test was carried out to assess the ability of the Irrisept Antimicrobial Wound Lavage (Irrisept) device to disrupt and reduce clinically relevant biofilms. The testing approach used methods adapted from ASTM E2871-19, “Standard Test Method for Determining Disinfection ...
Personal care and cosmetic products are ubiquitous in our daily lives. Most of us wouldn’t readily go out to meet our peers without first practicing a bit of hygiene, which is why these products are so widely used. Personal care products and cosmetics are mainly applied externally (e.g., on hair, skin, and nails) as well as orally (e.g., on teeth, gums, and tongue) either for hygienic ...
MANTECH is a leading innovator of water, soil, and food analysis generating the highest quality result, in the shortest amount of time using green methods. With simple, smart analyzers MANTECH has introduced rapid alkalinity testing (RapidAlk™) reducing total analysis time to under 4 minutes with the use of smaller samples, testing ...
AirDrain Synthetic Turf Drainage Doubles as a 100% Vertical Drainage Layer and Shock Pad. With an ASTM F355-10a: Standard Test Methods for Shock-Absorbing Properties of Playing Surface Systems and Materials resulted in a 14.7% reduction in GMAX over a cement ...
Octane Test Engine combustion air is drawn through the intake air system from the room where the engine is installed. ...
SINPAR FTC-AD1 Automatic Reference Fuel Blending Unit is used for the automated preparation of cetane and octane reference fuels and standardization fuels for octane test engine and cetane test engine according to ASTM D2699, ASTM D2700, ASTM D2885, and ASTM D613. The blending unit prepares the ...
Micromeritics Instrument Corp., a leader in material characterization technology, has developed an optimized, automated solution for customers looking to characterize carbon blacks in accordance with the newly revised ASTM D1765-18 Classification System for Carbon Blacks Used in Rubber Products. Following a final balloting of ASTM Committee D24 on Carbon Black ...
To ensure the modifiers are doing their job, it’s essential to monitor and control the levels of the pnicogens. Meet requirements of ASTM standards Many ASTM test methods call for very low levels of detection by spark emission spectroscopy. A notable example is the 2017 revision of the ASTM E415 ...
The next step was to perform an in-field adhesion test, known as "ASTM D7234 - 05 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers," which determines the bond strength, (in pounds per square inch) of the resurfacing material in relation to the prepared concrete. ...
To meet a materials specification, you must test for everything. And right now, current specifications are above what many mid-range OES analysers can cope with. ...
This is essential for meeting today’s tight metals specifications and the analyser can meet the requirements of relevant standards and specifications such as for example the ASTM E415 test method for carbon and low-alloy steel and ASTM E1086 the Standard Test Method for the analysis of ...
Moisture resistance Rock wool in a relatively high humidity environment, the volume moisture absorption rate is less than 0.2%. According to ASTM C1104 or ASTM1104M method test, the mass moisture absorption rate is less than 0.3%. ...
Having worked in this industry for a number of years, a question that I am regularly asked is, “what is the best boom fabric to be used on my project”. The answer is that there is no right or wrong, but there are a few things to understand about the options you have before you make your ...
Our product range is suitable for OSHA, NIOSH, ASTM, EPA and CARB methods. For a complete overview on air monitoring from Sigma-Aldrich, visit SigmaAldrich.com/air-monitoring. Method Applications US EPA IP-6A – Determination of Formaldehyde & Other Aldehydes US EPA TO-11A – Method for Determination of ...
Traditional measurements of concrete strength rely on compression tests such as made in a lab on field cured sample cylinders of concrete made during the pour or pullout or penetration tests made on site. ...
This certification provides assurance that DUST/BLOKR® has no harmful effects when introduced to sensitive aircraft materials, deeming it worthy of aircraft runways and service roads. Testing involved included: Sandwich Corrosion Test In accordance with ASTM F1110, this test method defines the procedure for ...
EPA MLB SOP MB-28 describes the test methodology for producing and storing standardized spore suspensions of C. diff based on ASTM E2839, Standard Test Method for Production of C. difficile Spores for Use in Efficacy Evaluation of Antimicrobial Agents (ASTM International). ...
Therefore, creep cannot effect this scenario. ASTM D6992 Creep Test Not Applicable Those who make claims about potential for creep in load support have cited ASTM standard methodology. ASTM standards provide an accepted means for standardizing testing to be able to directly compare products. ...