Refine by
Bod Load Articles & Analysis
43 articles found
A Sugar Factory Wastewater Treatment Plant Experiences a Large Reduction in BOD/COD Levels The Newterra® Aire-O2® Triton Systems provides a reliable, efficient solution in a challenging environment. ...
Synopsis: Systems that dilute wastewater before depositing it into the ocean will deposit concentrated wastewater when they fail – violating environmental regulations. Application: The MarineFAST® treats, rather than dilutes, wastewater, and operates without needing to release wastewater into the ...
Solids build-up in this open anaerobic lagoon in Tennessee was hampering operations at a large US industrial food waste rendering plant. In just four months, a single application of Bio Dredger biocatalyst broke down solids, with samplings analysis showing 58% Total Solid Reduction (TSR) and 60% Volatile Solid ...
Client: Santos Location: Tarbat, Queensland Technology implemented: EcoFarmer 50 Industry: Energy Background: Due to the ever flocculating camp numbers (as low as 15 to 50 ep), the process of converting the BOD and Nitrogen loadings placed on the plant was a ...
Black liquor spills from the process can subject a downstream wastewater treatment system to periods of upset conditions and could potentially push the total BOD loading beyond the aeration capacity leading to potential permit violations. While these accidental spills by nature are impossible to predict, being able to immediately identify a change in ...
” His firm had previous experience with SBR at five locations, and sought a manufacturer who could provide for a design dry weather flow of 0.3 MGD; wet weather fow of 0.73 MGD; maximum day of 1.75 MGD, and peak hour of 4.43 MGD. Design loadings were 464 lbs. BOD/day and 70 lbs. TKN/day. Design limits were set at CBOD, 25 mg/L average; TSS, 30 mg/L ...
The local WWTP is built for 600,000 P.E. (BOD load; 700,000 P.E. hydr.). More than 95% of organic load comes from the local paper mill (Mondi SCP, a.s.). ...
Topics: wastewater, facultative, lagoon, pond, DO distribution, odor mitigation, SolarBee floating wastewater mixers System Overview: Wastewater influent to this system consists of ~50% municipal from the City and ~50% industrial from a local candy manufacturer. This is a 3-cell facultative lagoon system covering a total of 102 surface acres. Water enters the system at Cell 1 then flowing ...
The WWTP in Wilmington was looking to reduce Total Suspended Solids (TSS) by 60% and Biochemical Oxygen Demand (BOD) by 30% in order to meet incoming water quality regulalations. However, in order to meet these objectives, they faced challenges in terms of both space and budget. The Nexom Answer After exploring options, the engineers in WIlmington turned to EcoBELT™, a ...
The key factor in the choosing AQQA® for this project was the fact that the load of BOD, COD and Ammonia is high but nevertheless the membrane filter must perform without maintenance on site. ...
Several years ago we updated our town’s wastewater treatment system to a 100,000 GPD SBR, a nice size plant for our town to grow into. Our average BOD influent load is about 250 to 300 mg/l. Most of our customers are residential, and all of them exhibit the common traits of in-home chefs that we are known for in this part of the country. ...
The results also showed that the average loading rate entering the system was 3.7 kg COD/d, while the removal rate was 3.4 kg COD/d in a total bioreactor volume of 11.7 m³. In terms of BOD, the loading rate was 2.8 kg BOD/d and it was almost totally removed. This system requires little space (0.15 m²/person) and maintenance work ...
The results highlight the good overall performance of the system, with high mean removal efficiencies: BOD (biochemical oxygen demand) (94%), COD (91%), ammonia (72%) and total suspended solids (92%). ...
Staggering machine shutdowns and tank cleaning dramatically control both hydraulic and BOD loading to the wastewater system, avoiding most serious problems during this part of the outage. But even with the best controls, BOD loading nearly always increases and can overload the existing biological population. ...
Collection system conditions are usually perfect for the anaerobic bacteria to produce sulfides: Sufficient organic loading (BOD) Low oxygen levels (DO, ORP) Warm temperatures Unlimited dissolved sulfate Gravity lines can produce sulfides, but pressure mains and surcharged gravity sewers almost always create sulfides because they flow full all of the ...
Beyond these main drivers, a sustainable MBR system also leads to the most accurate type of design because it considers various parameters such as flows, biochemical oxygen demand (BOD), total kjeldahl nitrogen (TKN) loads, the relationship among BOD, TKN, and alkalinity, temperature, plus the relationship among various unit processes. ...
Energy consumption per pound of nitrogen removed is down by 26%. Influent BOD and total suspended solids (TSS) load is down by 27% and 20%, respectively. ...
More than that, loading reductions have cut back aerator maintenance and lowered energy consumption of blowers. ...
By increasing rbCOD through hydrolysis of the hydrolysable substrate, it is possible to reduce the influent load (i.e., TSS, COD, BOD, TKN) entering the WWTP through microbial processes. ...
The Problem: The Nation’s largest tank barge company is a centralized treatment facility that receives oily wastewater from barges and ships that transport oil and petroleum products. The wastewater is highly loaded with BOD, COD, TSS and oil and they were seeking a direct discharge permit. ...