Refine by
Material Testing Method Articles & Analysis
24 articles found
Additionally, these standards address desalination processes, materials, monitoring, and testing ...
Additionally, manufacturers must provide the FDA with detailed information about the processing of sterile medical devices, including disinfection, storage, and transportation. Testing Methods for Packaging Validation Packaging validation requirements for medical devices vary depending on the material and sterilization method ...
Seven aging test methods: At present, there are many aging test methods for polymer materials, including climate aging test, ultraviolet aging test, ozone aging test, hot air aging test, high and low temperature alternating aging ...
For samples in which toxicity was detected, Microtox responses were compared with the results of a battery of tests including conventional bioassays (algal growth inhibition, Daphnia magna acute test) and microbiotests (Rotoxkit F™and Thamnotoxkit F™). These additional bioassays generally confirmed the toxicity detected by the bacterial ...
A new decentralised settling system based on the principle of lamella separation was developed for the treatment of road runoff. Two different laboratory test methods, the DIBt (Deutsches Institut für Bautechnik) procedure and our own approach, were applied in order to evaluate the efficiency of the system based on the separation of fine mineral particles and ...
The Safe Drinking Water Act office of the EPA published its list of Alternate Test Protocols (ATP) in the Federal Register in July 2016. The list includes NECi Superior Enzymes' enzyme-based nitrate test method. ...
Abstract This report supports the implementation of European regulations on biocidal products for the product types 7, 9 and 10. Emission of active substances from material preservatives into environmental compartments can occur due precipitation. Risk characterisations have to be based on estimations of environmental concentrations of target substances leached from material preservatives. ...
Abstract This report supports the implementation of European regulations on biocidal products for the product types 7, 9 and 10. Emission of active substances from material preservatives into environmental compartments can occur due precipitation. Risk characterisations have to be based on estimations of environmental concentrations of target substances leached from material preservatives. ...
The BASF Fire Technology Laboratory in Ludwigshafen, Germany, conducts fire testing on materials to assess the fire behaviour and flammability of products and to determine whether they meet the necessary performance criteria specified in a wide variety of testing standards and regulatory codes. During these tests, a small ...
This eliminates the need for a treatment system solid management program as is typically required with precipitation methods. The pilot study results indicate that the primary control parameters for COD and BOD removal using ozone based-AOP are dosage, contact time and pH. This report presents the results of the AOP pilot testing program. ...
” Performance measurement is a major thrust of Subcommittee E44.09 on Photovoltaic Electric Power Conversion, which has developed more than 20 test methods focused on assessing PV systems in various conditions. Many of these methods form the foundation of qualification standards developed by other national and international standards ...
Supporting their efforts are numerous test methods, practices and guides developed by ASTM International Committee E44 on Solar, Geothermal and Other Alternative Energy Sources. ...
The Loss Prevention Certification Board (LPCB) operates an accreditation scheme to ensure that materials not only pass the flame retardant test, but that they are also manufactured in accordance with a recognised quality assurance programme. ...
One of the members of the BSI working group committee and a major contributor to the development of the Standard was Industrial Textiles and Plastics Ltd, the manufacturers of the market-leading scaffold sheeting product, Powerclad. Within BS 7955, test methods and minimum tensile strengths of the material, its attachment points and the fixings ...
Analysts monitoring for atmospheric carbonyls follow prescribed methods published by the US Environmental Protection Agency, the California Air Resource Board, and the American Society for Testing and Materials (ASTM®). These methods call for trapping carbonyls on an adsorbent coated with dinitrophenylhydrazine (DNPH). ...
The data sheet gives information regarding the various different physical properties of the material such as tensile strength, hydrostatic resistance, and coefficient of thermal expansion as well as the durability properties such as UV resistance, oxidative induction time, and temperature range. Information is also given with respect to the various standards to which the ...
The effects of intensive fluxes of neutrons, thermal ageing or other external factors result in considerable changes of material microstructures and properties. In particular, the development of the fine scale radiation-induced defects which impede the dislocation motion under the applied stress, known as the irradiation embrittlement, leads to mechanical properties degradation ...
The tubes are then tested with a thermal desorption instrument. Thermal desorption is well suited for the final testing of the vehicle interiors. However, it has limitations for use by the manufactures of products that go into the vehicles interior prior to final assembly. One method from the VDA for testing these ...
ELE International has supplied the School of Technology at Newcastle College with a complete suite of construction materials testing equipment and environmental instrumentation for use in its new on-site laboratory. The technology is enabling the college to give students invaluable first hand experience of materials testing procedures. The School of Technology teaches Higher National Diplomas in ...
To accomplish this objective, laboratory tests have been conducted to determine the heat transfer properties of the materials that compose tyres (i.e., tyre rubber and wires) by using a hot-plate apparatus. A hot plate was adopted by the American Society for Testing and Materials (ASTM) as a standard method. In ...