Refine by
Material Testing Method Articles & Analysis
200 news found
The February 24, 2016, Official Journal of the European Union includes the opinion of the European Economic and Social Committee (EESC) on “Nanotechnology for a competitive chemical industry.” The opinion addresses nanotechnology in an innovative Europe; nanotechnology in the chemical industry and medicine; nanotechnology as an economic component; nanotechnology as an environmental ...
This report presents the results of the AOP pilot testing program. Materials and Methods The ozone-AOP pilot plant consisted of a 6 m high column, operated in a counter-current mode. ...
Additionally, NIST will work to refine measurement approaches, convene the research and industry communities to assess the state of performance testing for impact energy absorbing/dispersing materials and identify gaps in these measurements. The ultimate goal will be to develop standard testing methods for these ...
ASTM International Committee C09 on Concrete and Concrete Aggregates has recently approved a new test method for evaluating the suitability of fine aggregates and other fillers for use in concrete. ...
One such proposed standard is WK44003, Test Method for Identification and Quantification of Rare Earth Elements (REEs) in Rare Earth Materials (REMs) by X-Ray Fluorescence Spectrometry, being developed by Subcommittee F40.04 on Rare Earth Materials. F40.04 is part of ASTM International Committee F40 on Declarable Substances in ...
One good example is the engineering material lab, where comprehensive testing methods for various materials are introduced to the students. Different ASTM International standards are used such as D638, Test Method for Tensile Properties of Plastics; C158, Test ...
There’s expertise to be gained by immersion in technical discussions and standards development. Through learning D20 methods, and talking with others in the industry, Stieha says, “My knowledge base and understanding dramatically ...
This practice is intended for the preparation of standard specimens of soil-asphalt mixtures suitable for tests of Test Methods , D1560, D1561, D4123, and other tests using specimens of the above dimensions. ...
This test method is extremely useful in a test laboratory environment where no common package material/size exists. This test method may apply to large or long packages that do not fit into any other package integrity test method apparatus. ...
These test methods are considered satisfactory for acceptance testing of commercial shipments. ...
It is believed that the most severe conditions likely to be encountered in outdoor service in the United States will be relatively mild compared to the conditions specified in this test method. Test Results—Materials can be classified by this test method as ...
Scope 1.1 This test method covers the determination of the relative grindability or ease of pulverization of coals in comparison with coals chosen as standards. ...
These test methods cover the physical testing of joint treatment materials such as joint compound, paper joint tape, glass-mesh joint tape, and an assembly of joint compound and paper joint tape. These materials are used in gypsum board construction. The test methods are ...
This specification covers requirements and test methods for materials, workmanship, dimensions, perforations, pipe stiffness, elongation, joint separation resistance, quality of extruded polyethylene, brittleness, bond, and marking of corrugated polyethylene (PE) pipe and fittings. ...
It is one of the oldest test methods under the jurisdiction of ASTM Committee D02, dating from the time when it was still referred to as the Engler distillation. ...
The test methods in this method are designed to show whether a given material is in accordance with Specification C922. 1. Scope 1.1 These test methods cover procedures for the analysis of sintered gadolinium oxide-uranium dioxide pellets to determine compliance with specifications. ...
Uranyl nitrate solution is used as a feed material for conversion to the hexafluoride as well as for direct conversion to the oxide. ...
Included here are criteria for classifying PE plastic tubing materials and PE plastic tubing, and requirements and test methods for materials, workmanship, dimensions, bond strength, carbon black, density,.sustained pressure, hydrostatic burst pressure, and environmental stress cracking. ...
Scope 1.1 This test method covers the qualitative determination of the acidity of hydrocarbon liquids and their distillation residues. ...
This method is an accelerated test which at relatively low test voltages, provides a comparison of the performance of insulating materials under wet and contaminated conditions. ...