Refine by
Pipe Flow Meter Articles & Analysis
68 articles found
Abstract Water scarcity, increasing populations, and climate change are shifting the global perception of the value of water to been seen not just as a commodity, but as an invaluable resource to be protected. Over the coming years, there will need to be sweeping systematic change making water measurement and management increasingly critical to preserving our water resources. To further ...
Electromagnetic flowmeters are widely used in industrial production, measuring the flow of liquids or gases using the principle of electromagnetic induction. While they offer advantages such as accuracy, reliability, and stability, they also have some limitations. This article will discuss the following areas where electromagnetic flowmeters are not suitable. Measuring Small or Extremely Trace ...
There are two main types of ultrasonic flow meters: Doppler and transit time. Both measure flow by transmitting and receiving ultrasonic waves in a pipe. ...
As an instrumentation expert, ARTang will discuss the accuracy of electromagnetic flowmeters, answering how to define and measure electromagnetic flowmeter accuracy, and how its accuracy varies in different application scenarios. Electromagnetic flowmeters are widely used in flow measurement. They measure the volumetric flow rate of conductive liquids based on the Faraday principle of ...
There are two main types of ultrasonic flow meters: Doppler and transit time. Both measure flow by transmitting and receiving ultrasonic waves in a pipe. ...
A vortex flowmeter is a common industrial flow measurement instrument used to measure the flow of various media, including liquids, gases, and steam. How should a vortex flowmeter be selected? The following are some selection recommendations: 1. Measured Media Vortex flowmeters are generally suitable for media such as gases, liquids, and steam. However, the following media are not suitable for ...
Determine the flow range: Select the appropriate flowmeter model and specifications based on the expected flow range, ensuring that the actual flow rate falls within the middle of the range to improve measurement accuracy. ...
(I) Readings are unstable and change dramatically Cause analysis: The pipeline where the ultrasonic flow sensor is installed vibrates greatly or there is a device that changes the flow pattern (such as the flow meter is installed downstream of the regulating valve, pump, or contraction hole). ...
(I) Readings are unstable and change dramatically Cause analysis: The pipeline where the ultrasonic flow sensor is installed vibrates greatly or there is a device that changes the flow pattern (such as the flow meter is installed downstream of the regulating valve, pump, or contraction hole). ...
When measuring liquids, pay attention to prevent cavitation phenomenon, cavitation phenomenon will lead to the loss of the measurement signal and damage to the flowmeter and downstream piping; ( 3) vortex flowmeter should not be used for wet gas or wet steam and other two-phase flow measurement; ( 4) vortex flowmeter can not be used for particularly viscous, waxy ...
Such as pulp, coal water slurry, slurry, mud and sewage.(2) Electromagnetic flowmeter does not produce pressure loss due to the formation of the detection of flow. The resistance of the meter is only the resistance along the same length of pipe. ...
At the same time, some liquids can penetrate PTFE, causing short circuits and corrosion to flowmeter components; ②PFA, which has lower permeability than PTFE, but is easily deformed when temperature and pressure change; ③Ceramic, which is suitable for a variety of application conditions, but this material is sensitive to temperature fluctuations and pipe stress; ④Rubber, neoprene ...
Ultrasonic flowmeter mainly consists of flowmeter body, ultrasonic transducer and its installation parts, signal processing unit and flow computer components. For on-site contact and clamp-on flowmeter, the pipe where the transducer is installed can be used as the meter body, the transducer of the contact flowmeter is directly in contact with the ...
In the practical application of flow meters, in order to achieve excellent measurement results, not only to choose the right type of meter, but also take into account the installation location of the flow meter to meet the measurement requirements of the selected instrument. ...
Ultrasonic flowmeter applications of various ultrasonic flowmeter has been widely used in industrial production, commercial measurement and water detection, etc., for example, in the municipal industry, raw water, water, water, sewage measurement, ultrasonic flowmeter with a large number of range ratios, no pressure loss characteristics, in order to ensure the measurement of the accuracy at the ...
Noise influencing factors In the ultrasonic flow meter measurement system, there are many pipeline systems involved, such as valves, rectifiers, and other types of flow-blocking pipes. ...
Unsuitable for: Non-conductive fluids (oils, gases, distilled water) or hydrocarbons. 2. Pipe Size and Flow Range Pipe Diameter: electromagnetic flow meter are available for pipes ranging from 2 mm to 3 meters. Flow Velocity: Optimal range is 0.3–10 m/s ...
When choosing between ultrasonic flow meters and magnetic (electromagnetic) flow meters for low-flow applications, several factors come into play, including accuracy, installation conditions, and the properties of the measured fluid. Ultrasonic Flow Meters for ...
Grounding Due to the relatively weak electric potential measured by electromagnetic flow meters, even slight interference can affect measurement results. ...
Food-Grade Flow Meter: Ensures that the flow meter meets standards for use with consumable products. ...