capacitor-testing Downloads
8 downloads found
For IEC Testing of residual voltage after plug disconnect. The CDT-240 V2 disconnects the line at the voltage peak and analyzes results to the requirements of various Standards, allowing quick results. Scope output for viewing decay waveform. Presets for EN 61010, EN 60065, EN 60950, EN 60601-1 and EN60335. Recommendations for Pluggable Type B equipment. NIST calibration supplied; A2LA ...
For IEC Testing of residual voltage after plug disconnect. The CDT-240 disconnects the line at the voltage peak and analyzes results to the requirements of various Standards, allowing quick results. Scope output for viewing decay waveform. Presets for EN 61010, EN 60065, EN 60950, EN 60601-1 and EN60335. Recommendations for Pluggable Type B equipment. NIST calibration supplied; A2LA calibration ...
The PDTech DELTAMAXX system measures current through a reference capacitor and test object. The current is measured by the voltage drop across shunt resistors. A 16-bit A/D converter processes these voltages. The phase angle difference between the high voltage and this current is determined by a novel algorithm, which allows the calculation of the loss angle and automatic elimination of several ...
Chroma 17010 Battery Reliability Test System is a high-precision system designed specifically for testing lithium-ion battery (LIB) cells, electric double-layer capacitors (EDLCs), and lithium-ion capacitors (LICs). The test equipment is suitable for product development and quality control by providing characteristic research, cycle life testing, product screening, and quality assessment. Chroma ...
PDTech DELTAMAXXTMDigital Loss Factor/Capacitance Analyzer and Partial Discharge Detector for Test Voltages up to 50 kVIRIS POWER OFF-LINE PRODUCTSThe PDTech DELTAMAXX digitalsystem determines with highprecision the dielectric loss factor(power factor), capacitance, andpartial discharge of:• Generator and motor windings• Transformers• Cables and capacitorsThe available systems ...
PassionOur ValuesCONDIS®High VoltageCapacitors3Maxwell Technologies SA – CONDIS® HV CapacitorsTable ofcontentsGrading Capacitors Page 4Coupling Capacitors Page 6GIS Capacitors Page 8Capacitive Voltage Divider (CVD) Page 10Speciality Capacitors Page 11CONDIS® Technology Page 12Design Details Page 13Technical Overview Page 14Type ...
• Working voltage range up to 10 kV DC • Grounded or floating operation • Built-in three fix value high voltage capacitors from 10 nF to 100 nF • Built-in monitoring high voltage voltmeter • SHORT function for short current testing of UUTs • Special function for Timer function testing in UUTs. • Verification of dielectric absorption ratio and ...
In order to diffuse doubts concerning the high announced current rating of the MiniSKiiP Dual modules and to prove that this high current can be conducted across standard PCBs, adaptor PCBs to contact the modules have been produced. Tests have been performed with two types of adaptor boards: small PCBs contacting only one module as well as one large PCB with a three-phase ...