Refine by
Capacitor Testing Equipment & Supplies
29 equipment items found
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 410 / NT 411 low-voltage wiring tester with the NT Control control software tests voltages up to 25 V and currents up to 25 mA at 2048 or up to a maximum of 16384 test points. The NT 410 / NT 411 test device checks the quality of every electrical connection with a single device – from the smallest printed circuit board to the most ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low- and high-voltage harness tester, Cirris CH2, supports testing up to 1500 VDC and 1070 VAC. It can be expanded to 100,000 test points for increased throughput. The advanced CH2 tester can expand to up to 100,000 test points in 156-point increments. Its compact base and expansion chassis each hold up to 800 test points. ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
With a compact and rugged design, the low-voltage tester Cirris 8100 supports up to 100,000 test points and tests complex wire assemblies as part of your production process. The 8100 low-voltage tester, powered by Easy-Wire® software, offers seamless integration into your production process. Supporting 256 to 100,000 test points, it efficiently tests complex wire assemblies, including ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KT 236 mobile high-voltage wiring tester with display and control software in a hard-shell case checks up to 512 test points for insulation up to 1000 VDC and test voltages of 80 - 1000 V. The portable KT 236 test system can be used anywhere thanks to its waterproof, hard-shell case that even floats. In this context, the wiring tester easily ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The high-voltage tester Easy-Touch Pro is a powerful standalone unit that can also be seamlessly integrated into a manufacturing process for consistent and accurate testing. The Cirris Easy-Touch Pro offers advanced testing capabilities for low and high-voltage cables, as well as components like diodes, resistors, capacitors, and twisted ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The low- and high-voltage tester Cirris 4250 ensures accurate testing of opens, shorts, miswires, and other errors It is expandable from 128 test points up to 1024 points in 128-point increments. The Cirris 4250 cable tester elevates cable testing with advanced features for both low- and high-voltage applications. ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
The PDTech DELTAMAXX system measures current through a reference capacitor and test object. The current is measured by the voltage drop across shunt resistors. A 16-bit A/D converter processes these voltages. The phase angle difference between the high voltage and this current is determined by a novel algorithm, which allows the calculation of the loss angle and ...
Manufactured by:Johanson Dielectrics based inCamarillo, ALABAMA (USA)
AC power ceramic capacitors by Johanson Dielectrics are specifically engineered to handle high voltage and high capacitance applications. These capacitors are available in various configurations, including the 1808 and 1812 sizes, and come with different voltage ratings, such as 1000V. Designed with Ni/Sn (RoHS compliant) terminations, these ...
Manufactured by:Electronic Concepts, Inc. based inEatontown, NEW JERSEY (USA)
The 5PT series capacitors by Electronic Concepts are designed to meet the elevated current carrying needs of resonant power circuits. These capacitors excel in performance due to their ability to handle higher current at lower capacitance values, which provides circuit designers with greater reliability and performance in their systems. The innovative ...
Manufactured by:ELECTRONICON Kondensatoren GmbH based inGera, GERMANY
Cool: Our new filter capacitor is reliably secured even with rigid connections. Overpressure protection, but different this time. ...
Manufactured by:Charcroft Electronics Ltd based inWrexham, UNITED KINGDOM
ClarityCap® has taken the science behind audio performance and capacitor technology seriously, for many years. During that time research has been carried out with the leading academic audio research departments and respected audio industry figures, launching new products, only when we are able to contribute tangible benefits. The development of the Purity audio capacitor builds on the ...
Manufactured by:Electronic Concepts, Inc. based inEatontown, NEW JERSEY (USA)
The LH3 series film capacitor from Electronic Concepts incorporates Lo-Henry™ technology, designed specifically for next-generation inverter applications. Utilizing a coaxial film configuration, this capacitor boasts extremely low inductance (ESL), significantly reducing system costs by allowing for a more compact terminal layout and minimizing buss bar dimensions. This series is ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
The KAL 9510 has been designed to fulfill the standard requirements of a PD calibrator. Its wide range (from 1 pace to 50 no), its small injection capacitor, carefully selected features and intuitive user interface makes the KAL 9510 ...
Manufactured by:Compliance West USA, Inc based inSan Diego, CALIFORNIA (USA)
For IEC Testing of residual voltage after plug disconnect. The CDT-240 V2 disconnects the line at the voltage peak and analyzes results to the requirements of various Standards, allowing quick results. Scope output for viewing decay waveform. Presets for EN 61010, EN 60065, EN 60950, EN 60601-1 and EN60335. Recommendations for Pluggable Type B equipment. NIST calibration supplied; A2LA ...
Manufactured by:Compliance West USA, Inc based inSan Diego, CALIFORNIA (USA)
For IEC Testing of residual voltage after plug disconnect. The CDT-240 disconnects the line at the voltage peak and analyzes results to the requirements of various Standards, allowing quick results. Scope output for viewing decay waveform. Presets for EN 61010, EN 60065, EN 60950, EN 60601-1 and EN60335. Recommendations for Pluggable Type B equipment. NIST calibration supplied; A2LA calibration ...
Manufactured by:Electronic Concepts, Inc. based inEatontown, NEW JERSEY (USA)
The UNLYTIC LH3 series film capacitor employs Lo-Henry™ technology to minimize Equivalent Series Inductance (ESL). This advanced capacitor features a compact terminal layout, reducing overall bus bar dimensions, which is crucial for keeping system costs low. Encapsulated in a specially formulated potting compound, it achieves enhanced thermal performance. The capacitor's housing is ...
Manufactured by:Electronic Concepts, Inc. based inEatontown, NEW JERSEY (USA)
The 5MC Series Metallized Polycarbonate Film Capacitor is developed by Electronic Concepts specifically for use in switch-mode power converters. This miniature capacitor helps conserve printed circuit board space due to its compact configuration. It features low equivalent series resistance (ESR), substantial ripple current capability, and a high resonant frequency, making it ideal for ...
Manufactured by:Chroma ATE, Inc. based inIrvine, CALIFORNIA (USA)
Chroma 17010 Battery Reliability Test System is a high-precision system designed specifically for testing lithium-ion battery (LIB) cells, electric double-layer capacitors (EDLCs), and lithium-ion capacitors (LICs). The test equipment is suitable for product development and quality control by providing ...
Manufactured by:Iris Power LP based inMississauga, ONTARIO (CANADA)
Iris Power Epoxy Mica Capacitors (EMC) are designed to detect Partial Discharge activity in motors, generators, switchgear and isolated phase bus while not imposing on the machine’s operation or reliability in any way. Iris Power’s 80 pF EMCs are designed to block the 50/60 Hz power frequency and allow only high frequency (>40MHz) signals to pass through, be collected and analyzed ...
Manufactured by:Matsusada Precision Inc. based inShiga, JAPAN
DJOPF series are four-quadrant bipolar power supplies that source and sink electric power. Thanks to the original design, phenomenal lightweight and compact size power supply, which is 5.51 inches (140 mm) width, and weighs 3 kg, has been achieved. The bipolar amplifier is equipped with a built-in function generator enabling its compact size and fast response. You can use them in 2-mode of a CV ...