interface-detector Downloads
61 downloads found
Lower probe to tank bottom. Place cable on counter roller. Press zero. Raise probe until light and/or horn sounds. Note probe travel ...
The NEW SID-20200 replaces the SID-10200 with upgrades that include: ?Side mounted counter roller that measures probe travel. ?Digital display that is visible at night?. Switchable Inch or Centimeter display units. ?Auto sleep preserves batteries. ?Easy clean faceplate with tactile buttons. Light weight and ultra simple to ...
Remove Old Probe Assembly: power SID <OFF>, remove faceplate screws (4 ea.), lift faceplate from case head, demate probe connector from printed circuit board header, unscrew strain relief from case adapter and slide along probe cable, unscrew case adapter from case handle, pull and route probe cable and probe connector out of case handle. ...
SLUDGE INTERFACE DETECTOR SID-10200 • Infrared sensor probe • Audio & visual LED indicators • Sensitivity adjustment • Low battery indicator • IP 67 - Field rugged and weather resistant SID-10200 is a portable handheld instrument that accurately determines the sludge blanket solid/liquid interface depth in ...
The RAEGuard 2 PID is a fixed photoionization detector (PID) that measures a broad range of volatile organic compounds (VOCs). ...
The I-MON 512 OEM Interrogation Monitors offer real-time spectrum monitoring of FBG sensors in the 1550 nm wavelength range at line scan rates up to 17 kHz. A high spectrometer resolution combined with a broad wavelength range provides high-resolution interrogation monitors allowing measurement of a large number of FBG sensors. A direct interface to the InGaAs detector offers OEM integrators a ...
The I-MON 256 OEM Interrogation Monitors offer real-time spectrum monitoring of FBG sensors in the 1550 nm wavelength range at line scan rates up to 35 kHz. A high spectrometer resolution combined with a broad wavelength range provides high-resolution interrogation monitors allowing measurement of a large number of FBG sensors. A direct interface to the InGaAs detector offers OEM integrators a ...
Interface (and level) detection is a basic measurement requirement for many processes. Whilst traditional level detection techniques are available for many applications, certain interfaces present significant measurement challenges. Using patented measurement methods, ITS has developed the LEVEL-ITOMETER, an ECID (electrical conductivity interface detector) which is suited ...
The Founten Temperature and Alarm Sensor is an add-on accessory to the Founten FS-STAT-32AC or FS-STAT-32ACH. It is connected to the Founten thermostat using 3 wires to provide power and communication. Once connected it provides an input for either an external temperature probe (for temperature monitoring and control) or to add a dry contact input to generate an alarm notification through the ...
ByFounten
For over 40 years Crowcon has been developing and manufacturing high quality products with a reputation for reliability and technical innovation.Our robust and reliable range of gas detection control panels allows you to monitor a range of toxic and/or flammable gas detectors, flame detectors and smoke/heat detectors, simply and easily.With ...
Handheld unit construction glass-filled polyamide width 4.25” (108mm) length 8.0” (203mm) height 3.25” (82.5m) weight 27.9 oz (790g) color yellow faceplate 1/8” aluminum plate environment moisture IP67 (NEMA-4x) weatherproof temperature -5°f to +158°f (-20°c to 70°c) power supply battery standard 6 x AA cells (standard alkaline) battery life (typ) 3 months operator controls ...
Relay card, up to max. 6 pcs. A/D – Interface, up to 4 pcs can be connected to the BUS-line 4...20 mA-Detector, max. 8 detectors could be connected to one A/D-Interface 4-core cable, shielded 6 3.3 BUS Wiring Arrangement with 4..20 mA- and Bus-Detector inputs CANline Monitor max. 32 ...
Benzo[g,h,i]peryleneConditions• column: SLB-IL59, 20 m x 0.18 mm I.D., 0.14 µm (custom)• oven: 65 ºC (0.5 min), 25 ºC/min to 300 ºC (20 min) • inj. temp.: 265 ºC• carrier gas: helium, 50 psi constant pressure• detector: MSD, interface at 300 ºC, m/z = 50-500• injection: 1 µL, splitless (1 min)• liner: 4 mm I.D., split/splitless type, wool packed single taper ...
• Exceptionally high throughput and high signal to noise for improved discrimination and better decision making• High speed capable of inspecting a 1.6 meter wide conveyor belt moving at 3 m/sec • Covers the IR region extending from 800 nm to 2500 nm in a single system • Modular design flexible with multiple detectors• Custom collection optics, lenses and fibers available• Other ...
The Suspended Solids Density Meter from Markland Specialty Engineering helps municipal and industrial plants by providing real-time knowledge of primary, secondary, return-activated and backwash sludge/silt concentrations in pipes, tanks, re-circulation loops and clarifiers, and automates sludge removal. It uses the inherently safe attenuation of non-radioactive ultrasound, and requires no ...
For operators at municipal and industrial water & wastewater treatment plants, The Sludge Gun®, a handheld sludge blanket interface level detector from Markland Specialty Engineering, is a welcome addition to their toolbox. This compact, weatherproof device measures silt/sludge levels in clarifiers, settlement tanks, sedimentation basins, lagoons and ponds, and helps provide valuable ...
The Ultra1000 Series is a 24 VDC powered toxic gas detector consists of an interface module in a flame proof instrument enclosure and a 316 Stainless Steel sensor head assembly. The detectors monitors a variety of toxic gases in the parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen ...
Equipment and Features F-10300 Centrifuge • Six-position rotor with 19mm Centrifuge Tubes rotates at a right angle to the axis of spin and provides a sharp, easily read solids/liquid interface. • Digital timer (with fifteen minute speed key) to start and automatically switch unit OFF at end of test. • Corrosion resistant stainless steel and aluminum construction for durability ...
Model PT295 Series is a 24 VDC powered toxic gas detector consists of an interface module in a flame proof instrument enclosure and a 316 Stainless Steel sensor head assembly. The detectors monitors a variety of toxic gases in parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen ...
Model PT395 Series is a 24 VDC powered toxic gas detector consists of an interface module in a flame proof instrument enclosure and a 316 Stainless Steel sensor head assembly. The detectors monitors a variety of toxic gases in parts per million (ppm) range, including: ammonia, carbon monoxide, chlorine, chlorine dioxide, hydrogen, hydrogen ...