Interface Detector Articles & Analysis
9 news found
The MX 62 TP features the latest HMI (Human Machine Interface) specifically designed to facilitate interaction with the controller and the wider gas detection system. ...
Users of the Neoma Multicollector ICP-MS system will benefit from: The ability to extract the finest detail of isotopic information from samples, utilizing the highest sensitivity ICP interface, and the lowest noise detectors available. The most flexible MC-ICP-MS instrument available; a new detector array that covers the broadest range of ...
Aquilar are pleased to announce the release of the all-new AquiTron AT-MGS-400 series of Gas Detection sensor and control panels. The AT-MGS-400 series is a complete leak detection solution and has been designed specifically for safety compliance (BS EN378, BREEAM Pol 01 & ASHRAE 15) in air conditioning and refrigeration applications (machinery rooms, chillers, cold storage, walk-in ...
The General Monitors gas and flame detectors that now carry the MED wheel mark include: the FL4000H Multi-Spectrum IR Flame Detector, the S4000CH Combustible Gas Detector, the IR400 Point IR Gas Detector and the IR4000S Single-Point Gas Monitor. ...
It can operate as a stand-alone unit or interface with any alarm or visual warning devices and control systems. In addition to standard 4-20mA-type gas detectors, Gasmaster can also be used with mV pellistor-type flammable gas detectors, which are significantly lower in cost than 4-20mA-types as they have no internal electronics. Sensor ...
It can operate as a stand-alone unit or interface with any alarm or visual warning devices and control systems. In addition to standard 4-20mA-type gas detectors, Gasmaster can also be used with mV pellistor-type flammable gas detectors, which are significantly lower in cost than 4-20mA-types as they have no internal electronics. Sensor ...
Although it is possible to observe and measure each of the several characteristics of a detector under different and unique conditions, it is the intent of this recommended practice that a complete set of detector specifications should be obtained at the same operating conditions, including geometry, flow rates, and temperatures. It should be ...
The upgraded product has applications in gamma process monitoring and gamma interlock monitoring where the detector part of the monitoring system is routinely exposed to very high dose rates for prolonged periods. Such applications can now rely on proven back end SIL instrumentation [CMS-Interlock/Process-SIL] with the added benefit of front end detection [ION Chamber ...
Additionally, they get along with only small amounts of sample material and can be perfectly interfaced with various inline ...