low-flow-sampling Downloads
105 downloads found
Premium
F&J Model DF-1L-BL-8 is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAH NiMH batteries, (2) line power, or (3) automobile cigarette lighter socket. ...
Low-flow purging and sampling (astm standard d67771) is a well-known method of extracting groundwater samples from a well at a very low rate (less than 500 ml/min) in order to minimize contaminant volatilization and the amount of wastewater generated. The in-situ low-flow ...
The most complete selection of pumps, controls, and accessories for groundwater sampling – from the Low-flow ...
Application Low-Flow Sampling equipment is used to direct the flow of water past water quality sensors during purging and low-flow sample tests. The seal between the instrument and the flow cell prevents water oxygenation prior to analysis. The 3-way intake ...
Premium
The VAPex range has been designed particularly for low flow sampling of vapours and gases in working environments. Its Intrinsically Safe design and remote operation via the Airwave App makes it ideal for modern day sampling requirements. With a wide flow range of 20mL - 500mL, the VAPex personal sampling pump has outstanding back pressure capability. This capability ensures uninterrupted smooth ...
ByCasella
Low-Flow sampling allows you to automate the collection of well and pumping information, monitor and record the stabilization of key water quality parameters, and automatically generate sample reports that conform to federal and regional regulations. ...
The MP30 Drawdown Control Meter is designed to help control draw-down during monitoring well purging, especially when used with MicroPurgebasics pump controllers. The MP30 has 3 primary modes of use: When connected to MicroPurge basics controllers, pump operation is automatically paused if the selected drawdown limit is reached, then resumed when the well recovers to this point. The MP30 includes ...
DrawDown mode is used for measuring falling water levels during purging, well development and for low flow sampling; helping to protect your pump from damage caused by dry ...
The ASI Model DP-049 Series In-Situ Dilution Probe is designed to function as a sample conditioning and transport system, the Dilution Probe performs four critical functions to prepare the sample from the stack (duct or process) so that it can be measured accurately and precisely by the analyzer (typically an "ambient level" analyzer). The system uses an air ...
Theunique combination of flexibility and size make the pumpeasy to transport and install in a variety of applications.The Micro DVP is ideal for low flow sampling and narrowdown-hole applications. Flow rates of 20 to 150 ml/min,are obtained, with very small associated purge volumesfrom within the narrow applications. ...
The ASI Model ESP-050 Series Direct Extractive Sample Probe ("ESP") is designed to function as a low-flow sample filtering and metering instrument. It is a variant of our originally designed Straight Extractive Sample Tip (aka "SEST"). The ESP Probe prepares the sample from the stack (duct or ...
Suite 110, Orlando, Fl. 32809 Phone: 800-330-2825 www.apbuck.com Fax: 407-851-8910 TechBrief T100-601 BUCK-BASIC™ 1 Pump Validated Sampling System The BUCK-Basic™ 1 is the most powerful low-flow sampling pump that can handle both personal and area sampling. ...
The low flow workhorse of our pump range. Used for sampling with flow rates from 1-3 litres/min with an industry standard 0.8 micron filter. ...
Easy to load pump head with quick connect carrier. The EzyflowTM EZ-65-000 is designed for low flow ...
. • The only gas bag material that can sample and store hydrogen sulfide. • Collect low molecular weight compounds and inert gases not stable for Tedlar®. • Water and vapor-proof. • Sample stability up to 5 days. • Available with Polypropylene Locking Combo Valve with Septum, Polypropylene Screw Cap Combo Valve with Replaceable ...
Down well or above ground, QED opens up new possibilities by adding a new high-temperature polymer tubing to the lineup of Nitrile hose and jacketed nylon tubing sets for airpowered pumps. With a maximum working temperature of 250° F (121° C) at 100 PSI, Red-Line Tubing will be a problemsolver at your most challenging job sites. High-temperature tubing sets have the same UV protection as ...
The Model 170 protects gas systems requiring very low sample flow rates on a continuous or intermittent basis. Its small internal volume and low dead volume 1/16€ ports allow the Genie® Model 170 to purge quickly, which is ideal for the removing liquid aerosol droplets from gas samples; it is also ...
The Sample Pro XD Portable Pump is the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps. Pneumatic design can be operated with compressed air or compressed gas cylinder for complete ...
The Sample Pro Portable Pump, the first pump developed specifically to bring the advantages of low-flow sampling to sites requiring portable pumps, has been shown to be PFC-Free. Sample analysis by an independent laboratory showed no detections for 24 different perfluorinated compounds at detection limits much lower than the US EPA Health Advisory of 70 nanograms per liter (parts per ...
Petersburg, Florida 33716Tel: 800-451-9444 / +1 727-530-3602 | E-mail: [email protected] | Web: www.Sensidyne.comGilian LFS-113 Dual Mode Low Flow Sampling PumpLFS-113 FEATURES• Dual Mode Operation• Flow Fault Indicator• Timer Option (DC Model)• Battery Check LED The Gilian LFS-113 ...