stack-probe Downloads
56 downloads found
While best efforts were made during the specification of this device, it is important to doublecheck to ensure that the GasFinder3-MC Assembly is suitable for use for the area of ...
It consists of a probe sampling device with a spout aimed in the opposite direction of the emission exhaust with a heated pre-filter to withhold any particles interfering with the sample (device provided for monitoring of SOx and NOx, SOV without heating). The StackGas 2001 probe is configured to allow the user easy sampling. It is available with two standard suction tube lengths: 350 and 750 mm. ...
Our isokinetic probes are realized to make the sampling easier by placing the probe more precisely in the stack emission flow during isokinetic ...
The QL40-NEU is a Quick Link system bottom sub., combinable with other QL tools based on your requirements. It measures Neutron porosity in counts per second, which can be directly related to the porosity of the formation. Other QL probes commonly stacked with the QL40-NEUinclude the Q40GRA (natural gamma), Q40DEV(deviation), and the Q40RES (multi-point resistivity).Other possibilities ...
The Q40DEN is a Quick Link system bottom sub., combinable with other QL tools based on your requirements. Measurements include SSD (short-spaced raw CPS and gm/cc density), LSD (long-spaced raw CPS and gm/cc density), Caliper, Compensated density, and Compensation. Other QL probes commonly stacked with the Q40DENinclude the Q40GRA (natural gamma), Q40DEV(deviation), and the Q40RES (multi-point ...
The Apex Instruments Dual Method 5 Heated Probe features two 1-inch diameter sheaths constructed from corrosion-resistant stainless steel, with the pitot, orsat line, stack, and probe thermocouples running in-between the sheaths. The sheaths are welded together periodically down the length of the probe. ...
GASS-2040 Components2.1 Probe, Probe Filter and Automatic Blowback (optional):The GASS-2040 system with integral probe filter eliminates the need for a high temperatureheated line by conditioning the gas sample at the sample gas extraction point on the stack. ...
Res. (240V/50 Hz).XC-40M Metering Console with Digital Gas Meter, Orifice Flow Meter, Probe Temp. Controller, Digital LCD Totalizer, 8 Digits, 1cc Resolution. Note: For (230VAC / 50 Hz) add - V.XC-40M-V Metric Metering Console with Digital Gas Meter and a 8 Digit Digital LCD Totalizer. 1cc Res. (240V/50 Hz).Probe Temperature Control: Compact, 1/32 DIN autotuning ...
The Apex Instruments Standard Method 5 Heated Probe features a 1-inch diameter sheath constructed from corrosion-resistant stainless steel, modular 3/8-inch pitot tip, 1/4-inch stainless steel quick connects, type-K thermocouples for stack and probe temperature, probe heater, orsat line, and a small parts package. Standard lengths are 3 feet to 16 feet. Probes are ordered according to nominal ...
This system provides a way for testers to improve the measurement of volumetric flow rate under cyclonic flow conditions found in some stacks and ducts. Multiple probes reduce the time for the flow Audits, therefore saving money by minimizing time spent at undesirable loads. ...
The Model 3300 is a 19” rackmountable integrated gas flow control system for monitoring and controlling gases.Principle of OperationSample gas is extracted from the process through a filter probe and conditioningsystem to remove particulate and moisture. The conditioning system supplies a clean,dry sample to the back panel of the Model 3300 Flow Control Drawer.The ...
Free Piston Stirling Cooler (FPSC) has only two moving parts.Probes are constructed from stainless steel or Alloy C276 for long-term use in extremely corrosive conditions. Probes come in standard lengths of 4’, 6’ and 9’. Type-K thermocouples are used to monitor, trap, stack and probe temperatures. ...
Our isokinetic probes are realized to make the sampling easier by placing the probe more precisely in the stack emission flow during isokinetic ...
HI-Q Stack & Fume Hood Sampling7386 Trade Street / San Diego, CA 92121 / Phone 858-549-2820 / Fax 858-549-9657 / Order Online @ www.HI-Q.net 29Ordering InformationHI-Q Environmental Products Company’s product line includes complete sampling systems, consisting of either type of probe, the transport line, sampling pump andflow controller. ...
Therefore a system capable of successfully sampling 10µmComplete Stack SamplingSystems & AccessoriesStainless Steel Probes, Nozzles, & FlangesComplete Stack Sampling Systems• Real-Time Monitoring• Sample Collection for Analysis• Mass Flow Control• Iso-Kinetic Sampling Systems• Custom DesignStainless Stack Sampling Components• ...
CASE: 9.75” x 4” x 2.75” Aluminum case with magnetic support 2. Weight: 3 lbs. 3. PROBE: 9” L x 3/8” OD (other lengths available) Inconel stack probe. Probe housing connects to instrument via a 10 ft. hose (other lengths available) and water trap or thermoelectric condenser. ...
Some EPA methods for compound sampling in gaseous phase are provided for using an impinger train that is placed on the back of the probe. The used configuration needs a sampling in gaseous phase are heated sampling probe with out stack provided for using an impinger train filter in accordance with US EPA 5 that is placed on the back of the ...
.• Any Sampling Method Requiring Accurate Volume Measurement at low sample rates (0.3 - 4 lpm).Call or Visit our website for more Information on our Method 6 Condenser Assemblies and Accessories for use with the XC-60 Source Sampler Console.SK-606 Method 6COMPACT & LIGHTWEIGHT ...