Refine by
Applications
- Continuous Stack Monitoring Systems for Ethanol
- Continuous Stack Monitoring Systems for Waste Energy
- Continuous Stack Monitoring Systems for Wastewater Incineration
- Combustion analyzers for boiler sector
- Combustion analyzers for refineries sector
- Combustion analyzers for heat treating industry
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for the nickel industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the boilers
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
Stack Probe Equipment & Supplies
58 equipment items found
Manufactured by:Universal Analyzers - AMETEK, Inc based inCarson City, NEVADA (USA)
The Model 270F is a Flare Gas Probe Assembly consisting of the filter body mounted in a NEMA 4X stainless steel enclosure. A blowback system is provided to allow the blowback to occur on command from a data logger, PLC or UAI timer card or external switch mounted in a safe ...
Manufactured by:AMS Analitica based inPesaro, ITALY
It consists of a probe sampling device with a spout aimed in the opposite direction of the emission exhaust with a heated pre-filter to withhold any particles interfering with the sample (device provided for monitoring of SOx and NOx, SOV without heating). The StackGas 2001 probe is configured to allow the user easy sampling. It is available with two standard suction tube lengths: 350 and 750 mm. ...
Manufactured by:Boreal Laser Inc. based inEdmonton, ALBERTA (CANADA)
Quantifiable Volumetric Result: Confirmation of both gas type and concentration. Remote Measurement Head Paired with one of our GasFinder3 Instruments. Stack/Duct (SDX) Probe: When combined with one of the GasFinder3 Analyzers, it creates a direct and non-contact measurement within a stack or duct for quantitative or feedback control ...
Manufactured by:Century Geophysical LLC based inTulsa, OKLAHOMA (USA)
The Series 4239 In-Line Litho-Density Tool employs two focused density detectors to compute borehole compensated density in real time while logging operations are underway. It further utilizes a photoelectric reader to measure the amplitude of returning gamma pulses, allowing for direct lithology determination. This tool can differentiate between various rock types such as sandstone, limestone, ...
Manufactured by:Century Geophysical LLC based inTulsa, OKLAHOMA (USA)
The Express Stack DualNeutron Tool - 4175 falls under the 4000 series of the Express Stack™ tools. It is designed for logging neutron porosity within geological formations, specifically recording both short and long neutron counts. For effective operation, this tool requires the 4000 Stack Gamma Ray Tool Sub to provide necessary telemetry. Fully digital and tailored for downhole ...
Manufactured by:Century Geophysical LLC based inTulsa, OKLAHOMA (USA)
The 4000 stacked Gamma-Temperature-Telemetry Tool is designed to record natural gamma and temperature data while ensuring robust data transmission telemetry. This tool is compatible with other express stack tools and can be utilized individually or in conjunction with multiple tools. Its fully downhole digital capability allows for quick automatic setup and unique tool identification, ...
Manufactured by:Century Geophysical LLC based inTulsa, OKLAHOMA (USA)
The Full Wave Sonic tool by Century Geophysical is designed for recording formation travel times using a single transmitter and three strategically spaced receivers. This tool captures full waveform data, near, mid, and far travel times, borehole-compensated delta time, and calculated sonic porosity. Additionally, it records receiver gains, amplitude variations, and natural gamma. Operating on ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Can be mounted in a separate NEMA 4 type housing or the system with all analyzers and sample cooler. With our unique sample back purge system, typically no sample filter at the stack probe is needed. During back purge not only the internal sample filter is cleaned, but also the heated sample line between the stack probe and the ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient temperature, in order to eliminate all ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas ...
Premium
Manufactured by:LAND® based inDronfield, UNITED KINGDOM
4650-PM Particle Monitoring System provides high-sensitivity, forward-scatter laser measurement for particulate matter and for use in combustion processes. ...
Premium
Manufactured by:H2O Biofouling Solutions B.V. based inElst, NETHERLANDS
Online real-time biofilm monitoring BIoGEORGE BG4 Biofilm Growth Detector – Biofilm Control Monitoring ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The QAL 181 dust analyzer is suitable for measuring particle emissions after both bagfilter and electrostatic precipitator arrestment plant. The monitor is suitable for measuring both low (0.1mg/m3) and high particulate concentration levels (300mg/m3). TÜV and MCERTS ...
Premium
Manufactured by:J.U.M. Engineering GmbH based inKarlsfeld, GERMANY
Gas analyzers for emissions measurement are typically exposed to heavy soot dust and condensed hydrocarbon contamination. Therefore it is absolutely necessary to fine filter the sample gas stream and prevent HC memory effects in the entire sample train. The J.U.M. Engineering PreFilter® 112 is an efficient, all heated and low pressure drop interface and sample filter for removing solids from ...
Manufactured by:Apex Instruments, Inc. based inFuquay-Varina, NORTH CAROLINA (USA)
The Apex Instruments Dual Method 5 Heated Probe features two 1-inch diameter sheaths constructed from corrosion-resistant stainless steel, with the pitot, orsat line, stack, and probe thermocouples running in-between the sheaths. The sheaths are welded together periodically down the length of the ...
Manufactured by:Perma Pure LLC - a Halma Company based inLakewood, NEW JERSEY (USA)
It processes the toughest samples, with flows of up to 25 liters per minute and moisture contents in excess of 50%. The GASS-2040 can be mounted anywhere, including on the stack flange with an integral stack probe, which eliminates heated sample ...
Manufactured by:Alpha Suite Inc. (ASI) based inMaple Park, ILLINOIS (USA)
Application: For use with standard in-situ and out-of-stack diluting sample probes, and our low-flow direct extractive probes. For in-situ probes when temp is too high for the standard glass Orifice. Basic Dimensions: 2 86" Lg x .75" OD. ...
Manufactured by:Alpha Suite Inc. (ASI) based inMaple Park, ILLINOIS (USA)
Application: For use with standard in-situ and out-of-stack diluting sample probes, and our low-flow direct extractive probes. Basic Dimensions: 110mm La., 6mm 00 stem (at outlet), 18mm OD (inlet ...
Manufactured by:Aer Sampling Inc. based in, CALIFORNIA (USA)
The surface that actually comes into contact with the flue gas sampled from chimneys/stacks. Inserted into probe heater and then probe sheath to use. Order the right type to fit different configurations (Aer Sampling's Standard, Flexible, Handy) or different ...
Manufactured by:Thermo Scientific - Air Quality Instruments based inFranklin, MASSACHUSETTS (USA)
Diluting Stack Probe Model EPM.300 Series performs four critical functions to prepare a sample from the stack (sample delivery, course filtering, fine filtering, and sample dilution).Dilution Probes are proven performers with low maintenance requirements in the field and a long life on the stack.The system uses an air driven ...