Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Air Filtration Solution for Odor and Environmental Emission Control
- Air Filtration Solution for Indoor Air Quality
- Air Filtration Solution for Emergency Gas Removal
- Particle Measurement Instruments for Particle Filtration Research
- Particle Measurement Instruments for Occupational Health and Industrial Hygiene
- Laser based remote sensing instruments for remote humidity applications
- Laser based remote sensing instruments for volcanic ash detection applications
- Laser Based Remote Sensing Instruments for Remote Temperature and Humidity Profiling
Air Quality Study Equipment & Supplies
22 equipment items found
Manufactured by:AIRPHOTON / GRASP Earth. based inLezennes, FRANCE
In combination with the cyclone inlet, this allows us to measure particles separately at PM2.5 and PM10, the sizes most critical for air quality studies. This capability significantly enhances our precision and effectiveness in environmental monitoring and research ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration applications where high sample flow rate is needed. The DGI collects size classified particles ...
Manufactured by:Karsa Oy based inHelsinki, FINLAND
Innovative features such as fast polarity switching and multi-pressure chemical ionization expand its capabilities, facilitating deeper insights into chemical processes and mechanisms relevant to air quality and pollution ...
Manufactured by:Picarro, Inc based inSanta Clara, CALIFORNIA (USA)
The Picarro PI2103 gas concentration analyzer delivers ultra-precise and stable measurements of ammonia (NH3) with a parts-per-trillion (ppt) lower limit of detection (LOD) and negligible drift. It is the ideal solution for urban and atmospheric air quality monitoring, studies of particulate matter formation, livestock emission quantification, ...
Manufactured by:Pure Air Filtration, LLC based inNorcross, GEORGIA (US) (USA)
PureAir Filtration’s Packaged Filter Unit (PFU) is a complete self contained, horizontal or vertical airflow packaged cell system. It provides continuous high efficiency air purification for low level contaminated air streams ranging in volume from 500 to 4000 CFM. These systems are typically used in free standing applications where fine purification of the air in a room is needed. PFUs are ...
Manufactured by:Pure Air Filtration, LLC based inNorcross, GEORGIA (US) (USA)
Keep electronics safe from corrosive pollutants while improving indoor air ...
Manufactured by:InPharmaTEC, a TCR Tecora division based inCogliate, ITALY
A sampling device can be used as a substitute for the respiratory tract as a collector of airborne particles, and as such, it shall reproduce to a reasonable degree the lung penetration by these particles. ACI Cascade Impactor 8 Stage for the efficient collection of airborne particles. ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
This small, portable, battery-operated unit is lightweight and easy to use. Volumetric flowrate is displayed continuously so adjustments to pump flow can be made in real-time. This primary calibrator is accurate to +/- 2% of reading. The Primary Calibrator 4146 has a range of 0.01 to 20 liters per minute ...
Manufactured by:HEKAtech GmbH based inWegberg, GERMANY
LGR’s new ground-breaking Ultra-Portable Methane Analyzer (UMA) reports measurements of methane and water vapor simultaneously in a package that is compact and crushproof. Small enough to be carried on-board aircraft (TSA approved size) and requiring only 60 watts, the UMA travels anywhere, initiates data collection within 100 seconds after power up, and opens up new opportunities to ...
Manufactured by:InPharmaTEC, a TCR Tecora division based inCogliate, ITALY
Andersen Cascade Impactor 2 stages is one of the confgurations of Andersen Cascade Impactor 6 stages Viable. It is used when size distribution is not required and only respirable and non-respirable segregation/fractions and total counts are needed. The Two Stage Viable Impactor consists of two sampling stages. When air is drawn through the sampler, multiple jets of air direct any airborne ...
Manufactured by:Environmental Devices Corporation (EDC) based inPlaistow, NEW HAMPSHIRE (USA)
HD-1004 Real-Time Personal Particulate Monitor is the only direct reading instrument designed for true breathing zone measurements and comprehensive graphical reporting. The miniature & size selective optical sensor mounts within the OSHA defined breathing zone. The attached 37mm filter cassette allows for concurrent gravimetric and analytical sampling of lung damaging particulates. ...
Manufactured by:SKC Inc based inEighty Four, PENNSYLVANIA (USA)
The SKC BioStage® viable cascade impactor meets NIOSH requirements and ACGIH recommendations for sampling indoor and outdoor mold and fungi. The BioStage comprises an inlet cone, precision-drilled 400-hole impactor stage, and a base that holds a standard-size agar plate. A high flow pump, such as the QuickTake 30, pulls microorganisms in air through the holes (jets) where they are collected ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
by:Blue Ox based inMinneapolis, MINNESOTA (USA)
Studies have shown that the air inside of some homes, especially during the winter months, can actually be more seriously polluted than some industrial cities. For those that suffer from allergies or respiratory issues; fresh, clean air is vital. We spend a large majority of our free time in our homes so proper ventilation is important. One way to ensure clean air is circulating through your home ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
MDI Metered Dose Inhalers; DPI Dry Powder Inhaler. Aerodynamic particle sizing. The design concept of the Andersen Cascade Impactor evolves from the following information: The human respiratory system tract is an aerodynamic classifying system for airborne particles. A sampling device can be used as a substitute for the respiratory tract as a collector of airborne particles, and as such, it shall ...
Manufactured by:HCTM based inIcheon-si, SOUTH KOREA
The AirSens measures air quality. The AirSens functions as a particle counter that measures particles in 16 channels and a measuring device that can measure PM1.0, PM2.5, and PM10. It also measures temperature, humidity and CO, CO2 concentration. ...
Distributed by:Mercury Instruments USA based inLittleton, COLORADO (USA)
Measurement of Total Gaseous Mercury in Air or Other Gases at Ultratrace Levels (ppq - parts per quadrillion). Atomic Absorption with Proprietary MI GoldTrap technology. Advanced AA photometer with stabilized Hg EDL lamp. Display of real-time signal reading. Display of results in bar graph. Data Logger. Exports data to PC. Optional Auto-Calibrate. Pollution prevention. Sturdy Construction. ...
Manufactured by:S&G Enterprises, Inc. based inGermantown, WISCONSIN (USA)
An all-in-one solution to eliminate the cost and hassle of microscope slide disposal! The SlydEater is the first machine to exclusively pulverize glass slides and obliterate any identification affixed to those slides. The unrecognizable mound of glass dust can be tossed into regular trash, not in medical or red bag waste or expensive sharps ...
Manufactured by:American Ecotech LLC based inWarren, RHODE ISLAND (USA)
The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM25 or TSP particulates and basic meteorological parameters. The MicroVol 1100 is suitable for both indoor and outdoor applications. The unit is microprocessor controlled and uses a mass flow sensor in conjunction with ambient temperature and pressure sensors to automatically maintain a constant volumetric ...
Manufactured by:Raymetrics S.A. based inAthens, GREECE
The LR111-D300 model aerosol LIDAR is an active laser remote sensing instrument, designed to provide a wealth of information about the atmosphere, including unambiguous detection of volcanic ash. It can also provide detailed information on the Planetary Boundary Layer (PBL), including information for air quality and forecasting model validation. With a minor upgrade, the system can provide remote ...