Refine by
Automatic Filter Testing Equipment & Supplies
20 equipment items found
Manufactured by:Qinsun Instruments Co., LTD based inShanghai, CHINA
EN 143 Automated Filtration Efficiency PFE Tester Mask Testing Machine G506 is used to test the inhalation resistance and exhalation resistance of respirators and masks under certain condition. ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
TSI manufactures a full line of automated air filter and respirator testers. They are THE standard for filter test applications and are known for simple, reliable operation. Our line currently includes three testers, each designed with a different level of performance in mind. Models 8127 and 8130 allow you to load and test filters every 10 seconds. The full-featured Model 3160 measures ...
Manufactured by:SCPUR based inQingdao, CHINA
Features: Particle counters as detectors. Remote trouble shooting and calibration are realised. Highly automated. No need to manually adjust the test concentration. switch the test aerosol. Strong data storage and processing ...
Manufactured by:SCPUR based inQingdao, CHINA
Features: Particle counters as detectors. Remote trouble shooting and calibration are realised. Highly automated. No need to manually adjust the test concentration. switch the test aerosol. Strong data storage and processing ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
TSI's Respirator Leak Tester helps you perform fast, easy, after-maintenance leak tests on full-face, air-purifying respirators. With this respirator leak tester accessory, you can use your Model 8127 or 8130 Automated Filter Tester to challenge a respirator with test aerosol. Simply mount the respirator on the head form and scan the respirator with the hand-held probe. Test critical areas like ...
Manufactured by:Porous Materials Inc., based inIthaca, NEW YORK (USA)
The PMI Automated Filter Cartridge Tester provides fully automated through-pore analysis of entire filter cartridges of various geometries. Tests include bubble point, pore size distribution, mean pore size, gas, liquid, and Frazier permeability, and filter integrity. Sample chamber design permits use of cartridges having diameter and length over a wide range from several feet to several inches. ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The model 8177 photometer is a retrofit option for any 8130 filter tester. Light scatter photometers are the preferred choice for detectors in respiratory filter and filter media testing. Photometers have a very high dynamic range and sensitivity and thus can be used to measure filter efficiencies up to 99.999% without dilution. The model 8177 photometers are now user- and field-serviceable, ...
Manufactured by:Vidac Solutions based inFenton, MISSOURI (USA)
This Partial Discharge tester allows for increased production throughout by testing multiple parts at one time. Vidac Solutions was able to build a tester that could Hipot two parts simultaneously and then perform the Partial Discharge testing one part at a time. It is critically important to keep the busswork noise-free and eliminate cross talk between the two high voltage systems. The product ...
Manufactured by:Camfil UK Ltd based inHaslingden, UNITED KINGDOM
Camfil Farr’s CamContain CS Housings with 'bag-in/bag' out technology are used to separate radioactive, toxic or bacterial particles and gases to provide the highest safety for the ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Automated Filter Tester Model 3160 determines the pressure drop and fractional efficiency at different particle sizes (15 to 800 nm) in order to obtain the most penetrating particle size (MPPS) of HEPA and ULPA filters and filter media. It is designed to comply with the test requirements of EN 1822 parts 3 and 5. ...
Manufactured by:Qinsun Instruments Co., LTD based inShanghai, CHINA
filter material performance tester is used to quickly and accurately detect the resistance and efficiency performance of various flat materials, such as glass fiber, PTFE, PET, PP melt-blown composite filter materials. Product design conforms to many domestic and foreign industry standards such as EN1822-3: 2012, GB19083-2003, GB2626-2019 (KN95), ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
Based on TSI's established model 8130, currently the world's most-used filter tester, model 8130A now offers higher sensitivity and resolution - up to 99.9999 percent efficiency has been produced with Emery oil at concentrations of 200 mg/m³. The new serviceable photometers are lowering the cost of ownership and enable proactive scheduling of maintenance for minimal impact to production ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
The 100X Automated Filter Tester is designed for test and quality control validation of filter media, replaceable particulate filters, and masks used in medical and industrial hygiene applications. The 100X meets leading global industry standards such as NIOSH 42 CFR Part 84, GB 2626, EN 13274-7:2019, ASTM F3502-21, and ASTM F2100-23. The 100X is a high-capacity automated solution ideally suited ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The model 3140 filter tester uses the same aerosol generation technology as the model 8130A respiratory filter tester. It works with Emery oil, DOP, DEHS, paraffin and other oils. Two new generation CPCs simultaneously count upstream and downstream particles. This enables accurate, repeatable and fast measurements, for example a HEPA filter can ...
Manufactured by:TSI Incorporated based inShoreview, MINNESOTA (USA)
The model 8587A laser photometer uses the same photometer engine that is used in the Automated Filter Tester model 8130A. It uses a 30 mW laser to illuminate and collect the scattered light from airborne particles. An internal valve allows switching between upstream and downstream sampling. Due to its portability and wide dynamic range, it also is used in HEPA filter scanning systems measuring ...
Manufactured by:Qinsun Instruments Co., LTD based inShanghai, CHINA
The mask particle protection effect detector is to place a national standard head mold in a self-purification detection chamber with a volume of 500L, and wear the mask to be inspected on the head mold, and generate salt gas with a median diameter of 0.6 μm and a concentration of 25 ...
Manufactured by:Telstar - part of the Azbil Group based inBensalem, PENNSYLVANIA (USA)
The LyoMega range covers the most demanding freeze drying integrated and customized solutions for pharmaceutical ...
Manufactured by:Palas GmbH based inKarlsruhe, GERMANY
Fast and economical quality control and development of flat media with dust, oil or salt starting at 120 nm. Versions MFP 1000 HEPA for EN 1822-3 and ISO ...
Manufactured by:Qinsun Instruments Co., LTD based inShanghai, CHINA
The tester is used for performance testing of filter elements, disposable masks, filter media, etc. for respiratory protection products. It's suitable for safety testing of such products, basic filtration performance evaluation and development guidance for new ...
Manufactured by:Air Techniques International (ATI) based inOwings Mills, MARYLAND (USA)
The 100X Automated Filter Tester is designed for test and quality control validation of filter media, replaceable particulate filters, and masks used in medical and industrial hygiene applications. The 100X meets leading global industry standards such as NIOSH 42 CFR Part 84, GB 2626, EN 13274-7:2019, and ASTM F3502-21. The 100X is a high capacity automated solution ideally suited to meet the ...