Refine by
Applications
- Screening Equipment and Filters for Power Plants
- Screening Equipment and Filters for Oil and Gas
- Articulating Concrete Mattress System for Boat Ramps
- Articulating Concrete Mattress System for Access Roads/Driving Surface
- Articulating Concrete Mattress System for Border Wall Infrastructure
- Articulating Concrete Mattress System for Bridges
- Articulating Concrete Mattress System for Coastal Protection
- Articulating Concrete Mattress System for Culvert Protection
- Articulating Concrete Mattress System for Dams & Levees
- Articulating Concrete Mattress System for Energy
- Articulating Concrete Mattress System for Landfill Down Chutes
- Articulating Concrete Mattress System for Low-Water Crossings
- Automated wire processing solutions for quality solutions areas
- BIA-ACC Device for OSO-Test
Cable Testing Equipment & Supplies Near Libya
336 equipment items found
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage fKVl: 150 ...
Manufactured by:Haefely Test AG based inBasel, SWITZERLAND
Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 300 ...
Manufactured by:Himalayal Corporation Limited based in, CHINA
One pair. Un rated voltage (KV): 400 ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
ETL-15 is a cable test van used for testing cable insulation and locating faults in power cables. ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, including burn ...
Manufactured by:KharkovEnergoPribor Ltd. based inKharkiv, UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 using a ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KT 651 high-voltage wiring tester tests the voltage resistance up to 5000 VAC/6000 VDC and optionally high current up to 2 ADC at 64 test points. The KT 651 effortlessly handles connection, short-circuit, and component tests, thereby ensuring the quality of the most demanding high-voltage cables. Optional features such as pin ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The high-voltage tester Easy-Touch Pro is a powerful standalone unit that can also be seamlessly integrated into a manufacturing process for consistent and accurate testing. The Cirris Easy-Touch Pro offers advanced testing capabilities for low and high-voltage cables, as well as components like diodes, resistors, capacitors, and twisted ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 410 / NT 411 low-voltage wiring tester with the NT Control control software tests voltages up to 25 V and currents up to 25 mA at 2048 or up to a maximum of 16384 test points. The NT 410 / NT 411 test device checks the quality of every electrical connection with a single device – from the smallest printed circuit board to the most ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KT 231 high-voltage tester for test applications up to 1000 VDC is ideally suited for integration into automated production lines and can be used flexibly as a stand-alone solution. The KT 231 high-voltage tester from adaptronic is compact, and its performance, cost-effectiveness, and wide range of versatile applications are impressive. It can be connected to ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
With a compact and rugged design, the low-voltage tester Cirris 8100 supports up to 100,000 test points and tests complex wire assemblies as part of your production process. The 8100 low-voltage tester, powered by Easy-Wire® software, offers seamless integration into your production process. Supporting 256 to 100,000 test points, it efficiently tests complex wire assemblies, including ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The basic version of the KT 410 low-voltage wiring tester includes 2048 test points (expandable to 16,384) and is ideal for testing with a high number of test points. The KT 410 low-voltage wiring tester also masters complex testing tasks. Whether in small back panels or extensive test bench applications in large-scale production – this versatile system reliably tests connections with test ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 700-2 and NT 700-3 wiring testers are designed with up to 1024 test points for insulation testing up to 1500 VDC and voltage proof tests up to 4670 VDC and 3300 VAC. The NT 700-2 test device has test point interfaces on the front, while the NT 700-3 model is designed as a test bench variant with test point interfaces on the rear. Although they differ in their application, both perform ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Developed for high voltage testing, the CT45-HV 3kV Rack device is a relay matrix rack with an upgraded CT45 controller designed to incorporate all CS WIN nx® functionalities. The combination of the CT45-HV 3kV Rack device with the CS WIN nx® testing software enables the integration of both low and high voltage technologies in a single application, providing full flexibility. The CT45-HV ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MS5xx Test Adapter is a versatile interface between wire harnesses and measurement technology, and includes TSK Connect, which provides an advanced digitalization feature. The core benefits of using this new digital technology are significant time savings in project setups, increased flexibility, faster operational features, and improved productivity. The MS5xx Test Adapter offers an ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TD1200-VTS vacuum test system is a test bench with a vacuum chamber and sealed adapters, which make it particularly suitable for voltage tests on unshielded cable harnesses. High-voltage wire harnesses, such as those used in electric vehicles, must undergo dielectric strength testing. When ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 211 low-voltage wiring tester is designed for testing network cabling. It has 512 test points and can be extended to up to 2048 test points. The NT 211 low-voltage wiring tester is ideal for use on test desks and test benches, but can also be used in stand-alone operation. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The TS1700-ALU test system is the solution for complex wire harnesses. Our largest and most flexible test system is suitable for testing very extensive and complex wire harnesses. The TS1700-ALU test system streamlines wire harness testing and improves the overall efficiency of production processes. Its ...
Manufactured by:Kabelwerke Villingen GmbH (KWV) based inVillingen, GERMANY
Short development cycles and efficient production times ensure reliable logistical planning. We know that our customers need to keep development cycles short and to ensure that production times are fast. And in our company, the entire workflow is designed with precisely this in mind: to suit your ...