Refine by
Applications
- Gas detection for building ventilation control
- Gas detection & hazardous gas monitoring equipments for battery rooms gas detection
- Flow Solutions for Ultra Low Pressure Drop MFC
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Flow Solutions for Low Pressure Drop Control
- Gas detection & hazardous gas monitoring equipments for waste water treatment
Combustion Sensor Equipment & Supplies
157 equipment items found
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model FP-700 is a non-intrusive "Smart" sensor designed to detect and monitor combustible gases in air over the range of 0-100% LEL using catalytic bead sensor technology. The plug-in, field replaceable detector is poison-resistant and features over-sized gold-plated connections that help prevent corrosion. The FP-700's rugged framework includes ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme WS GasPost Series toxic or combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and transmits this value to the control panel via a 900MHz or 2.4 GHz wireless medium. The WS Wireless GasPost Sensor / Transmitter includes a high gain antenna concealed inside the enclosure as well as a ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model IR-700-CH is a non-inirusive "Smart" sensor designed to detect and monitor combustible hydrocarbon gases in air over the range of 0-100% LEL using miniature non-dispersive Infrared Optical (NDIR) sensor technology. As compared to catalytic bead sensors, with NDIR there is no risk of sensor poisoning, no ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme Combustible gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output signal. The Acme 40-ST Combustible Gas sensor is explosion-proof. The enclosure of the sensor/transmitter is an explosion-proof ...
Manufactured by:Delphian Corporation based inNorthvale, NEW JERSEY (USA)
Delphian's transmitter is epoxy encapsulated for complete environmental protection and puts sensor power regulation and support electronics where it counts - at the sensor ...
Manufactured by:Versaperm Limited based inMaidenhead, UNITED KINGDOM
The catalytic combustion technique is a widely used method for detecting and qualitatively measuring flammable gases. A catalytic palletised resistor or pellistor, is based on a fine coil of platinum wire, embedded within a ceramic pellet coated with a catalysts. When the surface is heated it allows oxidation to occur in a chemical reaction similar to combustion. This reaction releases heat, and ...
Manufactured by:Armstrong Monitoring Corporation (AMC) based inOttawa, ONTARIO (CANADA)
The AMC-360 series has been setting the standard for value in combustible gas detectors for many years. With time-tested catalytic bead pellistor sensors, and a standard explosion proof enclosure, the AMC- 360 provides the best value for performance for your combustible gas monitoring ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
GasBoss*100 Combustible Gas Sensor -- All combustible gas sensors aren't equal. There are big differences that rarely get mentioned. Our quality catalytic bead sensors last for years, often 5-10 or more, before a head needs to be replaced. Most of our competitors' last a year, maybe two. And, our GasBoss*100 ...
Manufactured by:Monicon Technology Ltd. based inGalway, IRELAND
The CGS500 combustible gas sensor has been designed to measure concentrations of combustible gases in the range 0-100% LEL. The CGS500 is fitted in an EExe certified junction box. Each sensor contains two thermocatalytic beads. Combustible gases will oxidise on the surface of the active bead while the reference ...
Manufactured by:Figaro Engineering Inc. based inMino, JAPAN
The sensing element of Figaro gas sensors is a tin dioxide (SnO2) semiconductorwhich has low conductivity in clean air. In the presence of a detectable gas,the sensor's conductivity increases depending on the gas concentration inthe air. A simple electrical circuit can convert the change in conductivity toan output signal which corresponds to the gas concentration.The TGS 816 is not only ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
Four or eight combustible gas sensors are installed at potential fuel gas leakage sites onboard a bus or truck (engine compartment, fuel tanks, piping/valving, inside cabin) to detect any measurable leakage of potentially explosive fuel gas. A compact cab-mounted operator display (5” x 3” x 1.4”) monitors the four sensors, and ...
Manufactured by:Rel-Tek Corporation based inMonroeville, PENNSYLVANIA (USA)
The GasBoss*1100 is a breakthrough in economy and performance. A third the cost of others with similar specs, this unit is designed to serve industry and commercial businesses where budgets are tight and maintenance is minimal. This self contained unit houses an optical infrared source and solid state absorption analyzer, the electronics for providing 4-20mA and 0-1VDC analog outputs, plus a ...
Manufactured by:Neodym Systems Inc based inVancouver, BRITISH COLUMBIA (CANADA)
MiniKnowz™ is a series of compact, intelligent combustible gas sensing modules specifically designed for safety applications in fuel cells and gas-burning power generators. The devices are provided open-frame (circuit board only) for embedded applications in OEM equipment. Custom form factors can be developed for a nominal NRE and can be available within two to four weeks of approval of ...
Manufactured by:AQ Sense GmbH based inEbenhausen, GERMANY
The DS4-LEL Digital Combustible Gas Sensor is an intelligent digital gas sensor which utilizes the catalytic combustion detection principle to measure the concentration of combustible gases in the environment. It is an industrial-grade gas sensor with a small and compact design. ...
Manufactured by:ENMET, LLC based inAnn Arbor, MICHIGAN (USA)
EX-5100 is a remote gas monitoring sensor transmitter that incorporates a pellistor or catalytic bead sensor. This sensor consists of a matched pair of elements, one active and the other for compensation. The active bead is coated with a catalyst that, when in contact with a combustible hydrocarbon or solvent, causes the gas or ...
Manufactured by:General Monitors by MSA based inLake Forest, CALIFORNIA (USA)
The Model S4100C Intelligent Sensor is a microprocessor-based transmitter with integral three-digit readout. It is designed to measure and display concentrations of combustible gases in the 0-100% LEL range, but will continue to display concentrations up to 120% LEL. The sensing element may be incorporated in the transmitter housing or remotely mounted at ...
Manufactured by:Quatrosense Environmental Ltd. (QEL) based inRichmond, ONTARIO (CANADA)
The QTS-1710 Series utilizes catalytic pellistor bead technology for the measurement of combustible gases. The standard sensor is resistant to poisoning substances such as silicones, sulfur compounds, and chlorinated ...
Manufactured by:AVL List GmbH based inGraz, AUSTRIA
The industry benchmark in size M5 for thermodynamic analysis with smallest contour. The AVL sensor GH15D has a slim form factor thanks to its M3-sized cable connector, and is equipped with a sensor identification cable (SIC) for sensor data management (SDM). With thermally optimized piezoelectric crystal elements and a special Double Shell™ design, this indicating sensor delivers precise ...
Manufactured by:Quatrosense Environmental Ltd. (QEL) based inRichmond, ONTARIO (CANADA)
The B5 Series smart toxic/combustible gas sensor/transmitters use various sensing technologies to detect a wide assortment of gases. The units are housed in a NEMA 4X enclosure with integral relays and buzzer that will meet the most stringent of ...
Manufactured by:Quatrosense Environmental Ltd. (QEL) based inRichmond, ONTARIO (CANADA)
The Q5 Series smart toxic/combustible gas sensor/transmitters use various sensing technologies to detect a wide assortment of gases. The units are housed in a NEMA 4X enclosure with integral relays and buzzer that will meet the most stringent of ...