Refine by
Compaction Grouting Equipment & Supplies
12 equipment items found
Manufactured by:BAUER Foundation Corp. (BFC) based inOdessa, FLORIDA (USA)
Grouting is used in specialist foundation engineering to introduce the grout material (water with hydraulic binders and possibly additives) and solutions (soft gel, silicate gel) into the soil. A basic distinction is made between displacement grouting (compaction grouting, hydraulic fracturing) and ...
Manufactured by:Prime Resins, Inc. based inConyers, GEORGIA (US) (USA)
Precision Lift ® 4.0# is a two-component, high-density polyurethane foam used for void filling, compaction grouting, slab lifting and stabilization, and undersealing slabs. Only this system gives the ability to lift slabs to within 1/8″ accuracy and address underlying substrate problems. ...
Manufactured by:Prime Resins, Inc. based inConyers, GEORGIA (US) (USA)
Precision Lift ® 3.0# is a two-component, polyurethane foam used to fill voids, underseal and lift concrete slabs and foundations. This closed-cell, hydro insensitive, high density structural foam can be used for compaction grouting of soil and for filling voids behind pipes, walls, manholes and other structures. ...
Manufactured by:Prime Resins, Inc. based inConyers, GEORGIA (US) (USA)
Precision Lift ® 4.0# is a two-component, high-density polyurethane foam used for void filling, compaction grouting, slab lifting and stabilization, and undersealing slabs. Only this system gives the ability to lift slabs to within 1/8″ accuracy and address underlying substrate problems. ...
Manufactured by:Prime Resins, Inc. based inConyers, GEORGIA (US) (USA)
Precision Lift ® 4.0# Slow is a two-component, polyurethane foam used to fill voids, stabilize soil, and to underseal concrete slabs and foundations. This closed cell, hydro insensitive, high density structural foam is engineered for compaction grouting of soil and for filling voids behind and beneath slabs, pipes, walls, manholes and other structures. This ...
Manufactured by:Reed based inChino, CALIFORNIA (USA)
These Ultra High-Performance Pumps are used for the most extreme concrete pumping, vertical pumping up to 45 storeys, compaction grouting, pressure grouting, pumping cfa piles (continuous flight auger piling),tunnel construction , structural wall construction, parking garage construction , concrete wall construction ,concrete dome and storage ...
Manufactured by:Rose-Wall Manufacturing, Inc. based inGreenfield, INDIANA (USA)
Compact Size: 30″ deep x 54″ wide x 49″ tall, weight 645 lbs. 10 gauge steel construction. 3″ channel iron base with 2″ angle iron legs. 41 gallon mixing hopper. Thorough mixing of the grout accomplished by the unique design for the mixing paddles and hopper baffles. ...
Manufactured by:Rose-Wall Manufacturing, Inc. based inGreenfield, INDIANA (USA)
Compact Size 36' long x 36' wide x 49' tall . 10 gauge steel construction. 3' channel iron base with 2' angle iron legs . 41 gallon mixing hopper. Reliable 8 HP Honda OHV recoil start engine . Variable speed, all hydraulic drive. 12 gallon hydraulic reservoir. Bowie rubber gear pump (20 GPM @ 125 PSI). Thorough mixing of the grout accomplished by the unique ...
Manufactured by:Prime Resins, Inc. based inConyers, GEORGIA (US) (USA)
Precision Lift ® 4.75# is a two-component polyurethane foam used to fill voids, underseal and lift concrete slabs and foundations in wet or dry environments. This is a higher density formulation designed for supporting and lifting heavier structures. It can be used in wet or dry environments due to its hydro insensitive nature. ...
Manufactured by:ChemGrout based inLa Grange Park, ILLINOIS (USA)
The ChemGrout CG-500 series are high volume production skid mounted grout plants. This versatile unit is designed to mix and pump neat cement, sanded grouts and most commercial pre-blended grout mixes. These units feature two 70-gallon (265 liters) mixing tanks, a 15-gallon (57 liters) holding hopper and an open throat progressive cavity grout ...
Manufactured by:ChemGrout based inLa Grange Park, ILLINOIS (USA)
The ChemGrout CG-030 is a 3″ piston grout pump. This unit features a large 30-gallon (113 liters) holding hopper and the popular single-acting piston grout pump. The large holding hopper is sized to provide ample capacity for continuous pumping. A 18 gallon (68 liter) steep sided hopper is also available for thick pasty materials like repair mortars. The grout pump is a 3″ positive ...
Manufactured by:ChemGrout based inLa Grange Park, ILLINOIS (USA)
The ChemGrout CG-500HP series are skid mounted, high-pressure grout plants. These units feature two 70-gallon (265 liters) mixing tanks, a 21-gallon (80 liters) holding hopper and a high-pressure plunger grout pump. The unique double mix tank design permits continuous pumping as each mix tank alternates feeding the ...