Refine by
Compaction Grouting Services
12 services found
by:GeoStabilization International (GSI) based inGrand Junction, COLORADO (USA)
Compaction grouting is a ground improvement technique that improves the strength and stiffness of the ground by controlled, high pressure injection of low-mobility cementicious grout. As the grout mass expands, the soil is displaced and compacted. If injected properly, the grout does not flow ...
by:Advanced Construction Techniques Ltd. (ACT) based inKing, ONTARIO (CANADA)
Compaction grouting is typically performed in loose or weak soils to mitigate settlements and is also used for sinkhole remediation. Compaction grouting involves the injection of a very stiff, mortar like, cementitious grout into soil to densify or compact the soil under high pressure. When ...
by:Park Seismic LLC based inShelton, CONNECTICUT (USA)
If possible, preparation of the following information will help facilitate the consultation: Purpose of the survey [e.g., wind-turbine site investigation, soil/bedrock mapping, seismic site characterization (Vs30m), compaction evaluation, grouting evaluation, target detection (voids, weak zones, bedrock valley, etc.), etc.]. Maximum depth of investigation (Zmax) ...
Manufactured by:Multiurethanes Ltd. based inMississauga, ONTARIO (CANADA)
Multiurethanes provides technical services for complex cement grouting applications, including training, troubleshooting, equipment and ...
by:D`Appolonia Engineering based inMonroeville, PENNSYLVANIA (USA)
D’Appolonia provides a wide range of design services related to foundations and earth retention structures. Projects where these types of services are provided frequently involve develop-ment of innovative designs using specialty construction techniques to provide cost-effective construction solutions in difficult terrain or in conditions where conventional solutions are unattractive. Our ...
by:GZA GeoEnvironmental, Inc. based inBloomfield, CONNECTICUT (USA)
There are various treatment techniques that are available to improve the condition of poor or unstable ground by altering the nature of the soil insitu. For example, where loose sands or man- made fill are encountered, deep densification methods can be used to increase the density of the material to a degree that allows for construction of shallow foundations or, in the case of loose sands, ...
by:Geomaple Geotechnics Inc. based inNorth York, ONTARIO (CANADA)
The geotechnical engineering department at Geomaple Geotechnics Inc., provides a wide range of services for infrastructure, offshore, buildings, land developments, landslide, and slope stabilization projects. ...
by:Devo Engineering Company based inOrlando, FLORIDA (USA)
Prequalified by the Florida Department of Transportation for the following types of work: Group 9.1 (Soil Exploration) and Group 9.4 (Foundation Studies). Evaluation of engineering uses and limitations of various soils encountered in Florida. Settlement and bearing capacity analysis of shallow foundations, including individual spread footings, combined footings, continuous footings, mats, ...
by:Geocon based inSan Diego, CALIFORNIA (USA)
To confirm compliance with our engineering recommendations, we are commonly retained to provide quality assurance testing services during construction. We also provide a full range of special inspection services. Our field technicians and inspectors maintain current certifications including International Code Council (ICC), National Institute for Certification in Engineering Technologies (NICET), ...
by:Saudi Labs Ltd. based inRiyadh, SAUDI ARABIA
SAUDI LABS LTD. (SLL), is one of the leading Geotechnical Companies in the Kingdom of Saudi Arabia which has been accumulating its technical versatility through its outstanding performances in various geotechnical and laboratory works since its establishment in 1982. Adjusting to the needs of the Kingdom, SLL ventured in the field of foundation repair and structural rehabilitation. The ...
by:Civil & Environmental Consultants, Inc. (CEC) based inPittsburgh, PENNSYLVANIA (USA)
CEC offers a complete range of geotechnical engineering, soils analysis, and field testing services to industry, architects, developers, and contractors. We perform geotechnical investigations to determine foundation design parameters, investigate mine subsidence, develop site grading requirements, and design pavements. CEC also analyzes the stability of embankments and slopes, and designs ...
by:ARM Group Inc. based inHershey, PENNSYLVANIA (USA)
ARM is staffed by multi-disciplinary professionals with widely varied experience, enabling us to provide effective engineering services for projects ranging from the relatively simple to the most complex. Our in-house staff of geotechnical and geoenvironmental engineers, geologists, and geophysicists assess each assignment to identify the conditions and constraints that must be addressed. This ...