Refine by
Constant Flow Valve Equipment & Supplies
20 equipment items found
Manufactured by:Glenfield Invicta Ltd. based inMaidstone, UNITED KINGDOM
The Series 853 Fig 1340 Constant Flow Valve maintains a constant rate of flow regardless of variations in upstream or downstream pressures. It can be used where steady flows are required for treatment or dozing ...
Manufactured by:Bertfelt Teknik AB based inStockholm, SWEDEN
BT-Maric constant flow valves provide a constant, pre-determined, nominal flow rate for water and similar media regardless of the pressure variations. BT-Maric constant flow valves are designed for pipes from 1/8″ up to 2″ and regulate ...
Manufactured by:Asahi/America, Inc. based inLawrence, MASSACHUSETTS (USA)
Constant flow valves provide an accurate way of controlling flow without automation (neither electricity nor an air supply is required). Accurate control is achieved by the globe style body and seat-and-plug configuration. This unique design allows the valve to maintain a constant preset ...
Manufactured by:Bertfelt Teknik AB based inStockholm, SWEDEN
BT-Maric Wafers provide a constant, pre-determined, flow rate for water and similar media regardless of the pressure variations. BT-Maric Wafers are designed to be placed between flange mountings for pipe sizes between DN20 up to DN400. They control flow rates up to 13 500 L/min. Wafers are the preferred choice for higher flow rates and larger pipe sizes. There is no need to rotate pipes for ...
Manufactured by:Bertfelt Teknik AB based inStockholm, SWEDEN
BT-Maric constant flow valve type inserts utilizes a flexible rubber control O-ring with an orifice diameter that re-sponds instantly to pressure variations (within a given range). ...
Manufactured by:Griswold Controls based inIrvine, CALIFORNIA (USA)
Griswold Controls’ Irrigation High Limit Constant Flow Valves limit the flowrate (gallons per minute) to your exact need. Today a maintenance person can change the flow on an irrigation zone by easily adjusting the valve with the handle, increasing or decreasing that particular zone. This is a problem ...
Manufactured by:AFT Sp. z o.o. based inPoznań, POLAND
Capacity 0,1l/h – 30l/h, Pressure up to 24 bar, Modularity allowing adaptation, to required conditions, Accurate dosing without pulsation, or the use of control valves, Constant flow, independent of pressure, Best chemically resistant ...
Manufactured by:agrotop GmbH based inObertraubling, GERMANY
Asymmetric double flat fan venturi nozzle made from hard-wearing plastic POM or semi-ceramic.. Asymmetric spray angle for higher application speed. Optimum speed at 6 to 12 km/h. With its short 10° angle forward no spraying on the machine. Compact design in the standard bayonet system with single detachable distribution mouthpiece. High drift-reduction and application of vertical and averted ...
Manufactured by:H.D. Hudson Manufacturing Company based inChicago, ILLINOIS (USA)
Over 60 years of proven durability, uniformity and performance in disease vector control. Since 1952, Hudson X-Pert® brand sprayers have been used throughout much of the world as part of disease eradication ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
The VS-Series Air Sampling Systems can be either incorporated as the primary vacuum source in air monitoring instrumentation or used in conjunction with filter holders and filter media for the collection of particulate and/or gaseous constituents. The systems are furnished complete with a shock mounted base motor/pump, carrying handle, heavy duty constant air ...
Manufactured by:Ocenco based inPleasant Prairie, WISCONSIN (USA)
The M-20.3 meets the U.S. Navy requirements for shipboard shock and vibration, salt spray corrosion, and performance reliability. The compressed oxygen delivery system activates automatically when the device is removed from the clear case. The demand regulator allows the user to inhale immediately from the device when donned, and provides up to 100 liters of oxygen flow during high work rates. ...
Manufactured by:Ocenco based inPleasant Prairie, WISCONSIN (USA)
The M-20.3 meets the NIOSH 42 CFR part 84 subpart O requirements for closed circuit escape respirators. The compressed oxygen delivery system activates automatically when the device is removed from the clear case. The demand regulator allows the user to inhale immediately from the device when donned and provides up to 100 liters of oxygen flow during high work rates. The clear case allows the ...
Manufactured by:agrotop GmbH based inObertraubling, GERMANY
Universal flat fan nozzle made from hard-wearing plastic POM. Flow rates in accordance with ISO standards. High accuracy due to minimising variability in production. Wide pressure range and application rate. High durability. Fits in caps with spanner width of 8 mm, commonly used on most ...
Manufactured by:Ross Valve Mfg Co., Inc. based inTroy, NEW YORK (USA)
The flow control valve shall be globe (inline) or angle (90 degree) body with flanged end connections, be fully mounted, external solenoid pilot operated, with free floating piston (operated without springs, diaphragm or levers). It shall contain a single full-ported seat, with seat bore equal to size of valve. The minimum travel of the piston shall be equal to 25% of the diameter of the seat. ...
Manufactured by:agrotop GmbH based inObertraubling, GERMANY
Characteristics: Very low leaf burning risk due to extremely coarse, soft droplets. Highest wear resistance and accuracy with metering orifice made from high quality pink ceramic. Spanner width 11 mm. Pressure range 1-3.5 bar (15-50 psi). Best boom height 1.1-1.4 m (40-55"). Color code following Albuz EXA flow chart does not conform to ...
Manufactured by:Vindum Engineering Inc. based inSan Ramon, CALIFORNIA (USA)
Vindum VP-Series pumps are dual-piston high-pressure metering pumps that deliver ultra-precise, pulse-free, continuous flow in either constant-pressure or constant-rate modes, at up to 25,000 psi. High-temperature versions allow wetted parts of the pump to be heated to 320°F (160°C). Leading-edge design, compact size, and attractive pricing make these metering pumps perfect for a wide ...
Manufactured by:agrotop GmbH based inObertraubling, GERMANY
Low pressure off-centre flat fan venturi nozzle made from hard-wearing plastic POM. Two-piece design, no tools required for opening. Air cleaning system, no plugging of air entrance. High drift reduction. Wide application range. Same flow rate as corresponding flat fan nozzle. Suitable as end nozzle on booms in combination with AirMix flat fan nozzles. Fits in caps with spanner width of 8 mm, ...
Manufactured by:agrotop GmbH based inObertraubling, GERMANY
Hollow cone nozzle made from ceramic (coated with POM). The standard nozzle for applications in orchards or vineyards. Highest accuracy and wear resistance. Two-piece design, easy disassembly for cleaning. Constant fine droplet size (not recommended for drift reduced spraying). Flow rate is not corresponding to ISO chart, see ATR flow rates chart ...
Manufactured by:agrotop GmbH based inObertraubling, GERMANY
Off-centre flat fan venturi nozzle made from ceramic (coated with POM). High drift reduction and wear resistance. Compact designand easy to clean like all other AVI nozzles. Coated in a rugged plastic body made from POM. Corresponding nozzle to AVI 110° Flat Fan when used as boom end nozzle. Recommended for herbicide band spraying in orchards and vineyards. Fits in caps with spanner width of ...
Manufactured by:Statiflo International Ltd. based inMacclesfield, UNITED KINGDOM
The Statiflo Gas Dispersion System (GDS) is a new concept for simultaneous mixing and mass transfer. The Statiflo GDS is designed to overcome the difficulties associated with the use of a single static mixer. The system uses two different mixers, the first, in a sidestream, to form small gas bubbles and the second, in the main line to provide contact time and efficient mass transfer. As the gas ...