Refine by
Digestate Stream Equipment & Supplies
26 equipment items found
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Local Control Panel option for High and Low Pressure Electronically Actuated Drip Traps. The actuators on the Drip Trap can now be controlled either manually or with the new Local Control Panel. Its internal programmable timer allows the Local Control Panel to automatically cycle though Fill and Drain ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97100E Electric Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Available in either 3 or 6 quart sizes and with 1" NPT inlets and outlets, the Shand & Jurs Biogas 97100E adapts to any condensation or drainage collection requirement. The 97100E can be mounted in Class 1, Division 1 & 2, Gas ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97100 Manual Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97220 Back Pressure Check Valve uses a free swinging 'pendulum' pallet design to provide maximum flow rates with a minimum pressure drop in low pressure gas control ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The S&J 97120 Sediment Trap is designed to drop out sediment and condensate from 'wet' gas immediately downstream from the digester. This protects downstream equipment from corrosion, blockage and water hammer to keep the gas train running for years with low pressure ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97170 Double Port Pressure Regulator maintains a constant upstream or downstream pressure in gas blanketing, vapor recovery and other similar gas systems. The Regulator is a double port, direct drive, float actuated ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97130 Thermal Valve is a thermally operated shut-off valve typically located in low pressure biogas lines such as downstream of anaerobic digesters, landfills and lagoons, or upstream of flares and waste gas ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97126 Gas Purifier removes unwanted components, such as hydrogen sulfide (H2S), from low pressure gas streams. Typical applications include anaerobic digester gas trains, municipal landfills, anaerobic lagoons, pulp and paper digesters, food and beverage making, and other fermentation ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97125 is especially designed for hydrogen sulfide and hot/wet methane, which are the main components of digester gas streams in municipal wastewater treatment ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The S&J 97400 Well-Type Manometer is a direct reading single tube type gauge, that provides highly accurate, easy to read pressure measurements. Standard Red Oil Fluid with specific gravity of 1.0 is used in the manometer. The S&J 97400 Well-Type Manometer is used to gauge pressures at critical points in gas-train systems. Pressure, vacuum or differential pressure can be gauged to provide ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97401 U-Tube Type Manometer is a direct reading single tube type gauge, that provides highly accurate, easy to read pressure measurements. Standard red oil fluid is used in the ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97101E High Pressure Drip Trap with Electric Actuator provides for the automatic, continuous, safe removal of condensate from low points in high pressure gas piping systems. The S&J 97101E is available in 4 quart or 6 quart sizes and with 1' NPT inlets and outlets. It easily adapts to any condensation or drainage collection requirement. Removing condensed liquid ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97177 Double Ported Regulator provides sensitive control at a preset upstream or downstream pressure (up to 20" w. c.) in biogas lines such as those in low pressure digesters, landfills, lagoons and other fermentation processes. The regulator is a balanced, double ported valve that is actuated through a mechanical offset by a large spring-loaded diaphragm. The valve ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs The Shand & Jurs Biogas 97101 High Pressure Manual Drip Trap provides for the continuous, safe removal of condensate from low points in pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97110 Automatic Drip Trap provides for the continuous, safe removal of condensate from low points in low pressure gas piping systems. Removing condensed liquid protects the piping and equipment from corrosion and 'water hammer' ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas Single Port Back Pressure Regulator is a back pressure regulator with solenoid or thermally operated shut-off capabilities. The back pressure regulator function maintains a preset upstream pressure in low pressure (typically 2" - 10" w.c.) biogas lines such as those leading to flares and waste gas burners. Its normal operating position is closed until the set point is ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97160 Pressure Relief and Flame Trap Assembly combines a 97150 Back Pressure Regulator, a Thermally Operated Shut Off Valve, and a 94307 Horizontal Flame Arrester to maintain upstream pressure and effectively inhibit flame propagation in low-pressure gas ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas Model 97180 Foam Separator is designed for use in piping systems to remove foam caused by agitation from the digester discharge gas. The foam must be dispersed and collected in order to protect downstream equipment from corrosion or clogging. The Foam Separator is typically installed in the digester gas ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97127 Gas Purifier removes unwanted components hydrogen sulfide from biogas. Typical applications include anaerobic digester gas trains, municipal landfills, anaerobic lagoons, pulp and paper digesters, food and beverage making and other fermentation ...
Manufactured by:Schwing Bioset, Inc. based inSomerset, WISCONSIN (USA)
The NuReSys technology is focused on solving customer-specific phosphorus issues, as such, the technology is flexible in its configuration and can be applied in a number of combinations to solve the client’s specific needs. The process can be applied on digested sludge streams, post dewatering centrate, or even a combination of both. The produced struvite ...