Refine by
Applications
- Gas Analysers for Analysis in Hydrogen Production
- Gas Analysers for Additive Manufacturing Sector
- Gas Analysers for Solder Reflow Oven
- Gas Analysers for Renewable Energy
- Gas Analysers for Blue Hydrogen Analysis
- Gas Analysers for Inert Gas Blanketing
- Automobile emission gas analyzer solution for PC based emission monitoring system
- Automobile emission gas analyzer solution for vehicle emission testing station
- Automobile emission gas analyzer solution for vehicle emission testing station
- Air Quality Monitoring for City Infrastructure
- Complete Solutions for Ozone and Gas Detection
- Gas Detection for Medical and Industrial Applications
- Gas Analysers for Ceramic Capacitors
- Gas detection solutions for water treatment plants sector
- Gas detection solutions for medical laboratories and hospitals sector
- Gas sensors for industrial safety detection sector
- Solutions for industrial refrigeration and refrigerant gas leak detection industry
- Gas detection for building ventilation control
Electrochemical Sensor System Equipment & Supplies
90 equipment items found
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The Acme GasPost II toxic gas sensor/transmitter measures CO and NO2 gas concentrations in enclosed areas and transmit its readings to a CEL-series monitor/controller over an addressable RS-485 “Daisy-Chain” sensor ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
The ACME MegaSet series is a microprocessor-based multipoint multigas detection and control system that can be used with the GasPost sensors. The communication between the Control Panel and the remote GasPost sensor/transmitters is accomplished through a true RS485 daisy chain network. The versatility of the multipoint multigas detection system allows the user to customize the system parameters ...
Premium
Manufactured by:Teledyne Gas and Flame Detection based inArras Cedex, FRANCE
Model 700 Series Sensors are a non-intrusive "Smart" sensors designed to detect and monitor oxygen and Toxic Gases in air using electrochemical sensor ...
Manufactured by:Serrax Technologies Llp based inNew Delhi, INDIA
SERRAX TECHNOLOGIES pioneers the development of an indigenous real-time air quality monitoring system in a compact shelter. Meteorology, Particulate and gas measurement are performed simultaneously. Particulate monitoring is performed via a laser light scattering system and gaseous pollutants are monitored via electrochemical ...
Manufactured by:KWJ Engineering, Inc. based inNewark, CALIFORNIA (USA)
The ULPSM-CO V2 is a small form factor, ultra-low power CO sensor that produces a linear voltage output proportional to CO concentration from 0 to 500 ppm. This CO module combines the novel millimeter thin electrochemical sensor technology from SPEC Sensors, Inc. with an ultra-low power analog front end. The SPEC Sensor is the thinnest on the market, providing for a smaller overall profile, and ...
Manufactured by:Ntron Gas Measurement Ltd. - Process Sensing Technologies (PST) based inNavan, IRELAND
The Minox i Galvanic Fuel Cell Oxygen Transmitter is a highly reliable and cost effective, 2-wire, loop-powered transmitter with a 4-20 mA output. With a choice of process connections for direct insert or external mounting, the Minox i can be installed in the process or on a sample panel. Using different electrochemical sensing technologies, measurement accuracy and stability are combined with ...
Manufactured by:AQ Sense GmbH based inEbenhausen, GERMANY
The Stox Smart Ammonia Sensor Device is an intelligent sensor device from AQ Sense, which has a 4-20mA two-wire and a RS485 Modbus RTU output signal, it uses an intelligent microprocessor with high-reliability solid polymer electrochemical gas sensor technology and intelligent aigorithm calculation. The Stox Device is a smart solution for industrial safety applications, combining temperature and ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
The OMD-21 portable hand-held oxygen analyzer combines a rugged ABS enclosure and an advanced set of electronic features including a smart MENU interface with our industry leading precision electrochemical oxygen sensor technology. The result is a highly reliable and cost effective design with easy-to-use user interface. This low-maintenance unit is an ideal solution to spot check oxygen levels ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
The PO2-24 Percent Oxygen Sensor provides high levels of accuracy, reliability and linearity throughout its measurement ranges. The oxygen sensor is based on the galvanic electrochemical fuel cell principal and is manufactured in house under a strict quality procedure. The sensors are self contained and minimal maintenance is required – no need to clean electrodes or add electrolyte. The ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
The PO2-1120 Long Life Percent Oxygen Sensor provides high levels of accuracy, reliability and linearity throughout its measurement ranges. The oxygen sensor is based on the galvanic electrochemical fuel cell principal and is manufactured in house under a strict quality procedure. The sensors are self contained and minimal maintenance is required – no need to clean electrodes or add ...
Manufactured by:AQ Sense GmbH based inEbenhausen, GERMANY
The Stox Smart Gas Sensor Device is an intelligent sensor device from AQSense, which has a 4-20mA two-wire and a RS485 Modbus RTU output signal. It uses an intelligent microprocessor with high-reliability solid polymer electrochemical gas sensor technology and intelligent algorithm calculation. The Stox Device is a smart solution for industrial safety applications, combining temperature and ...
Manufactured by:Hal Technology, LLC (HalTech) based inFontana, CALIFORNIA (USA)
HalTech’s HCO107 Carbon Monoxide Meter makes it easy to take quick measurements of low CO levels. Featuring the newest generation of electrochemical sensors, the HCO107 is a point-to-sample instrument and responds very quickly to ambient changes in CO concentration with a built-in pump. The special circuitry design allows for no drift and accurate ...
Manufactured by:Pollution Monitors Group (PM) based inWoking, UNITED KINGDOM
The Element series of gas monitors has been designed to detect parts per billion (ppb) of toxic gases. The first in the series is our H2S ...
Manufactured by:Gas Detection (Australia) Pty Ltd based inToowoomba, AUSTRALIA
The GDA 2527 Nitrogen Dioxide (NOâ‚‚) Gas Sensor is a 2 wire 4-20 mA Loop Powered device with a range of 0-30 ppm Nitrogen Dioxide. It has an electrochemical sensing unit which is temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
Distributed by:Chrysalis Scientific Technologies Inc. based inBurlington, ONTARIO (CANADA)
The Matheson Model IQ1000 is a very unique gas detection instrument offering features not found in any other portable multi-channel monitor. Its innovative technology gives you the flexibility to monitor for more than 100 gases and vapors, without having to change sensors. While the IQ1000 is a 1-4 channel instrument that can accommodate several types of sensors, units equipped with the MEGA-Gas ...
Manufactured by:Sarvesh Analytics Pvt. Ltd. based inPune, INDIA
Measurement Range : 0 – 25 %. Sensor Technology: Electrochemical. Display Resolution: 0.01 %. Response Time T90: < 20 ...
Manufactured by:Gas Detection (Australia) Pty Ltd based inToowoomba, AUSTRALIA
The GDA 2526 Ammonia (NH₃) gas sensor is a 2 wire 4-20 mA Loop Powered device. It has an electrochemical sensing unit which is temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
The TO2-238 High Output PPM Oxygen Sensor provides high levels of accuracy, reliability and linearity throughout its measurement ranges. The oxygen sensor is based on the galvanic electrochemical fuel cell principal and is manufactured in house under a strict quality procedure. The sensors are self contained and minimal maintenance is required – no need to clean electrodes or add ...
Manufactured by:Southland Sensing Ltd. based inOntario, CALIFORNIA (USA)
The OMD-525X online oxygen analyzer is designed to measure oxygen from 0.01 parts-per-million up to 100%. The unit combines an advanced set of electronic features including a smart MENU interface with our industry leading precision electrochemical oxygen sensor technology. The result is a highly reliable and cost effective design with easy-to-use user ...
Manufactured by:Ntron Gas Measurement Ltd. - Process Sensing Technologies (PST) based inNavan, IRELAND
The SenzTx is a compact and robust O2 transmitter that utilises zirconia or electrochemical technology to give a reliable measurement of oxygen concentration. The zirconia sensor offers fast response time and a long service life with virtually no drift, whilst the electrochemical sensor allows measurement in background gases containing hydrocarbons. The minimum output range of 0 to 1000ppm is ...