Refine by
Float Switch Control Equipment & Supplies
89 equipment items found
Manufactured by:Digital Control Corporation (DCC) based inClearwater, FLORIDA (USA)
The Triplex Float Switch Pump Controller (TFSC) model 12064 is a control and display unit which automatically controls up to three single speed pumps. It is designed to be the heart of a triplex pump control system for lift stations and other fluid pump-down applications. The TFSC provides ...
Manufactured by:Digital Control Corporation (DCC) based inClearwater, FLORIDA (USA)
The Duplex Float Switch Pump Controller (DFSC) model 12036 is a control and display unit which automatically controls up to two single speed pumps. It is designed to be the heart of a duplex pump control system for lift stations and other fluid pump-down applications. The DFSC provides built-in ...
Manufactured by:Digital Control Corporation (DCC) based inClearwater, FLORIDA (USA)
The Triplex Float Switch Pump Controller (TFSC) model 12064 is a control and display unit which automatically controls up to three single speed pumps. It is designed to be the heart of a triplex pump control system for lift stations and other fluid pump-down applications. The TFSC provides ...
Manufactured by:Front Range Precast Concrete ( FLXX) based inCommerce City, COLORADO (USA)
Front Range Precast Concrete offers a wide selection of pumps, filters, control/alarm panels and switches to fit any regulation or specification for any job. Please click on the links below for details on the products we regularly carry in stock. Have a special request? Contact our sales representative and we will do our best to meet your ...
Manufactured by:Digital Control Corporation (DCC) based inClearwater, FLORIDA (USA)
The Backup Pump Controller (BUPC) model 11946 is a control and display unit which automatically controls up to two single speed pumps in the event of a primary controller failure. It is designed to serve as a backup controller in a duplex pump control system for lift stations and other fluid ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV) .Thanks to its wide switching angle of 110º, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, it can detect the both high and low ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This float level switch (NO or NC) is the economical version of the BIP STOP. Indeed, it is technically similar to the BIP STOP but equipped with a high quality PVC cable instead of a neoprene cable. Thanks to its wide switching angle of 100º, the BIP ECO protects the pump's engine and the electrical panels from jerking. ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
The BIP STOP is a small float switch designed for the automatic control of small pumps (until 1.5 CV). Thanks to its wide switching angle of 110º, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, it can detect the both high and low ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
This float switch is designed for the automatic control of pumps (until 1.5 CV) . Thanks to its wide switching angle of 120º, the BIP STOP protects the pump's engine and the electrical panels from jerking. This feature is highly appreciated in agitated liquids. Also, AT 120 can detect the both high and low level in the same ...
Manufactured by:ATMI based inMontigny le Bretonneux, FRANCE
These water level control relays are normally-sensitive controllers that maintain liquids within the set limits between a maximum and minimum level and provide protection for submerged pumps against dry running. The sensitivity is fixed. The use of these types of electrical probes gives an extraordinary operational safety because these devices are not very sensitive to the conventional humidity ...
Manufactured by:LIQUI Filter GmbH based inEngen, GERMANY
The depositing of contaminants on the filter fabric produces a filter cake which causes the liquid level in the trough filter to rise. A floating switch controls the movement of the filter fabric when the filter trough is full. Therefore, the filter fabric feed is automatic depending on the quantity and permeability of the filter ...
Manufactured by:Tornatech Inc. based inSaint-Laurent, QUEBEC (CANADA)
Boiler feed pump controllers are installed to automatically start and stop pump motor(s) in order to provide water to a boiler. Automatic level control is provided by a start and stop float switch. Provisions for a low water cut off float switch, make up control ...
Manufactured by:Hydromatic Pump based inAshland, OHIO (USA)
Unit has a 4⁄10 HP single phase motor complete with power cord. 2” NPT vertical discharge is standard. A full selection of accessories for automatic operation is available, and includes float switches, duplex controllers, simplex controllers, alarms, basins and check ...
Manufactured by:Edson Pumps, Division of the Edson Corporation based inNew Bedford, MASSACHUSETTS (USA)
Edson has assembled a few rugged, high quality sewage lift stations, made up of a submersible sewage pump, a fiberglass reinforced basin, float switches, electrical controls and selected plumbing. These small sewage pumping stations are used in combination with pump out ...
Distributed by:Southern Drip Irrigation Ltd based inChilliwack, BRITISH COLUMBIA (CANADA)
Whether you require a pump control panel, tank alarm, constant pressure controls, float switch, or even innovative floatless technology, finding the right solution is easy when you choose from the vast line-up of SJE Rhombus products. All of their products are certified and tested to handle nearly any application and are ...
Manufactured by:American Manufacturing Company, Inc. (AMC) based inElkwood, VIRGINIA (USA)
American drip dispersal process controls are based on the Perc-Rite® patented operating sequence. Panels are available as Simplex or Duplex that operate on a single or multi-zone configuration. Drip controls provide flow equalization with peak flow management and are designed on a repeat cycle timer basis. When a float signal tells the ...
Manufactured by:Shipco® Pumps based inShippensburg, PENNSYLVANIA (USA)
Pumps up to 18 GPM at 20 PSIG with 3/4" discharge size. The 5-1/2 gallon, heavy-fabricated steel tank contains a NEMA 1 float switch to control pump. An industry standard 56J frame motor can be purchased at anytime. All AC units can be converted to ACH units in the field. ACH unit has optional high water alarm switch or automatic ...
Manufactured by:American Manufacturing Company, Inc. (AMC) based inElkwood, VIRGINIA (USA)
Simplex demand control panels operate single pumps for residential and light commercial dose-on-demand systems. Each unit operates on either one differential float switch or two narrow-angle float switches for pump control plus one narrow-angle float switch for ...
Manufactured by:SJE-Rhombus based inDetroit Lakes, MINNESOTA (USA)
The SJE PumpMaster WPS is a mechanically-activated, wide-angle float switch providing automatic control in potable water and water applications. It provides direct control of pumps up to 1/2 HP at 120 VAC and 1 HP at 230 VAC or control applications as low as 120 VAC, 100 mA. It is CSA Certified to meet NSF/ANSI ...
Manufactured by:MaSaTECH, s.r.o. based inKarlova Ves, Bratislava, SLOVAKIA
The AIMS control unit allows easy management of all operation parameters of AIMS - Engine. Two integrated thermostats enable the control of the temperature of AIMS drift tube and sample inlet in range from 30 to 120 0C. The high voltage modules integrated in the control unit enable to pre-set AIMS drift field intensity in the range from 160 to ...