Refine by
Ftir Sampling Equipment & Supplies
23 equipment items found
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Hydraulic presses and other accessories for preparation of solid samples for FTIR analysis. The Specac Manual Hydraulic Press has been the mainstay of any analytical laboratory for decades. KBr pellets are easily prepared in minutes using an Evacuable Pellet Die. The Press can be easily upgraded with Heated Platens in order to prepare polymer thin films (when ...
Manufactured by:Firebird Optics based inNorthport, NEW YORK (USA)
The demountable cell assembly is the best choice for analyzing liquid samples, capillary films and mulls. This cell consists of two IR optical windows with a lead spacer in between to form a completely airtight, chemical-resistant compartment. Luer-Lok filling ports are included so you can easily inject your ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
NG SIRIO produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The NG SIRIO removes oxygen from air to less than 5 ppm and HC pollutants to less than 0.1ppm (if the optional scrubber is ...
Premium
Manufactured by:Hangzhou Chunlai Technology CO., Ltd. based inHangzhou, CHINA
Based on Fourier Transform Infrared Spectroscopy (FTIR), FT-2000P Portable FTIR Gas Analyzer can continuously monitor real-time concentration of multiple gas components in exhaust gas from industrial and mining enterprises, including SO2, NOX (NO, NO2), CH4, NH3, HCl, HF, CO, CO2, H2O, etc. Other gas components also can be extended as required, such as SO3 and ...
Manufactured by:PIKE Technologies based inMadison, WISCONSIN (USA)
The Heated Gas Flow Cell is recommended for high-performance FTIR sampling of flowing gas samples. The beam conforming design of the cell provides for minimum cell volume, maximum throughput, and a 100 mm pathlength. The gas cell may be heated up to 300 °C to prevent condensation of ghier molecular weight gas ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The ConcentratIR2™ is a miniature multiple-reflection ATR accessory, compatible with the smaller FTIR sample compartments. Designed for micro-liquid samples, it features interchangeable diamond and silicon ATR sampling plates. Both ATR configurations consist of a thin disk of silicon or diamond that is optically contacted ...
Manufactured by:CIC Photonics based inAlbuquerque, NEW MEXICO (USA)
Microscope compression stage. Simplifies FTIR microscopy sample preparation. Works with all FTIR microscopes. Uses standard windows. Eliminates interference fringes. Enables quantitatively accurate microscopy sampling. Unheated & heated ...
Manufactured by:Harrick Scientific Products, Inc. based inPleasantville, NEW YORK (USA)
The ConcentratIR2™ is a miniature multiple-reflection ATR accessory, compatible with the smaller FTIR sample compartments. Designed for micro-liquid samples, it features interchangeable diamond and silicon ATR sampling plates. Both ATR configurations consist of a thin disk of silicon or diamond that is optically contacted ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
Specac offers a range of pressing dies and hydraulic press die sets manufactured from the highest quality hardened 440C stainless steel to prepare pressed pellets for laboratory analysis, including KBr for FTIR and samples for XRF analysis, as well as other ...
Manufactured by:Firebird Optics based inNorthport, NEW YORK (USA)
The GC-10SS is Firebird Optics’ solution for FTIR analysis of gas samples. This is most helpful in qualitative analysis applications where one or more gasses are present in concentrations of more than ...
Manufactured by:California Analytical Instruments, Inc. (CAI) based inOrange, CALIFORNIA (USA)
Specifically designed for optimal sample handling of CAI FTIR analyzers. CAI offers four analyzer models that utilize Fourier Transfer Infrared technology for measuring concentrations of multiple gases within a sample. CAI FTIR analyzers deliver fast, accurate analysis of virtually any gas that has an infrared absorption ...
Manufactured by:Shimadzu Scientific Instruments Inc based inColumbia, MARYLAND (USA)
The high-end IRTracer-100 Fourier Transform Infrared (FTIR) spectrometer is your answer to the the need for increased speed and accuracy in FTIR spectroscopy. Combining high speed, sensitivity and resolution with enhanced expandability and easy-to-use FTIR software, the IRTracer-100 FTIR spectrometer quickly and easily obtains ...
Distributed by:S.T. Japan USA based inFt. Myers, FLORIDA (USA)
Easily shave off surfaces into thin samples for microanalysis. Proper sample preparation tools are a requirement for any microscopy lab. This is especially true for those performing FT-IR analysis where the sample must be between 5 and 20 microns in order to provide the desired transmission. The Mini-Plane enables you to shave off the surface of a material such as a polymer and cut a controlled ...
Manufactured by:JASCO Inc. based inEaston, MARYLAND (USA)
With over fifty years of experience in infrared spectroscopy, JASCO offers a series of advanced FT-IR instruments and sampling accessories. JASCO provides the most complete selection of FT-IR capability from education and routine analysis to high performance research systems including optimized dedicated systems for advanced technology applications such as measuring film thickness and CVD in-situ ...
Manufactured by:Enviro Solutions Technology Co.,Ltd based inWuhan, CHINA
ESE-FTIR-100P portable FTIR gas analyzer can monitor various kinds of components in the emission, such as SO2,NO, NO2, CH4, HCl, HF, CO, CO2, O2, H2O. According to actual measuring need, it can be extended to measure other components, like SO3, N2O and etc. This portable system mainly comprises FTIR analyzer and sampling probe. ...
Manufactured by:Harrick Scientific Products, Inc. based inPleasantville, NEW YORK (USA)
The Seagull™ is a powerful accessory for examining powders, optical coatings, opaque substrates, films on opaque substrates, and slightly curved solids by variable angle FT-IR reflectance spectroscopy. This accessory easily adapts for specular, ATR or diffuse reflectance measurements. The Seagull™ operates over a broad range of incident angles without misaligning the system, ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Specac Mini Pellet Press is an entry-level, handheld laboratory hydraulic press designed for KBr sample preparation. It offers quick and efficient preparation of high-quality 7 mm KBr pellets for transmission FTIR analysis, utilizing up to 2 tons of pressure. With its rugged and durable design, this portable mini hydraulic press is intended for frequent use ...
Manufactured by:CIC Photonics based inAlbuquerque, NEW MEXICO (USA)
The Workir is an industrial FT-IR spectrometer designed for on-line process monitoring. Derived from the highly successful Bomem MB Series of laboratory FT-IR spectrometers, it provides spectroscopic performance superior to that of other industrial units. This instrument is particularly well suited for composition determination of organic process streams in industries such as refining, ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Seagull is a powerful accessory for examining powders, optical coatings, opaque substrates, films on opaque substrates, and slightly curved solids by variable angle FT-IR reflectance spectroscopy. This accessory easily adapts for specular, ATR or diffuse reflectance measurements. The Seagull™ operates over a broad range of incident angles without misaligning the system, defocusing the ...
Manufactured by:Bruker Corporation based inBillerica, MASSACHUSETTS (USA)
The ALPHA II is a compact FT-IR spectrometer with a footprint the size of a laptop. It is used for chemical analysis and enables you to do quality control, quantifications and verification of raw ...