Refine by
Applications
- Separation solutions for HDD / trenchless industry
- Separation solutions for constructions industry
- KREBS® CP Cyclone Vessels & DeSanders for Automotive - Paint & Cleaning Processes
- Micro-irrigation systems for tree crops
- Micro-irrigation systems for open field
- Micro-irrigation systems for greenhouse
- Centrifugation and Separation Technologies for Oil Sludge and Drilling Mud Treatment
- Centrifugation and Separation Technologies for Soil Treatment (Flushing)
- Centrifugation and Separation Technologies for Household and Industrial Waste Water Treatment
- Centrifugation and Separation Technologies for Food Production and Milk Processing
- PFM Technology for Minerals Processing
- Sustainable Water Solutions for Aquaculture
- Water Pollution Control and Recovery Equipment for Oil & Grease Removal
- Water Pollution Control and Recovery Equipment for Oily Water Treatment
- Water Pollution Control and Recovery Equipment for Coolant Recovery Systems
- Water Pollution Control and Recovery Equipment for Pre-Treatment Solutions
- Hydrocyclones for flue gas desulfurization FGD power applications
- Hydrocyclones for chemical plants applications
- Hydrocyclones for quench water treatment
Hydrocyclone Equipment & Supplies
283 equipment items found
Premium
Manufactured by:4B France based inVillers Bretonneux, FRANCE
SWECO's hydrocyclone systems offer an economical and efficient solution for removing solid particles from various types of sludge waste, in a range from 4 to 100 microns. They provide finer separation than sieving separators, with significantly higher throughput. ...
Manufactured by:Tons Per Hour, Inc. (TPH) based inMound House, NEVADA (USA)
Tons Per Hour, Inc. offers a full range of fines recovery, scrubbing and classification cyclones. Both traditional hydro-cyclones and vacuum/syphon assisted cyclones for reducing underflow moisture and sand stacking ...
Manufactured by:AR Agricultural Irrigation Company based inKaratay, TURKEY
In-Out Inch: 2" Manshon. Flow Rate (m³/h) min-max: ...
Manufactured by:The Weir Group PLC based inGlasgow, UNITED KINGDOM
The Cavex 2 hydrocyclone marks a new era in separation ...
Manufactured by:Asmko-Bis S.C based inBukowno, POLAND
Hydrocyclone is a continuously operating device that uses centrifugal force to accelerate the sedimentation velocity of solids or liquids of different densities. The ASMKO-BIS company offers polyurethane hydrocyclones characterized by high strength and corrosion resistance. This results in longer service life than standard ...
Manufactured by:KNOLL Maschinenbau GmbH based inBad Saulgau, GERMANY
Removing sedimenting solids from liquids of low viscosity such as water and emulsions. Installation as independent cleaning unit on fine machining machine ...
Manufactured by:TH Company based inMunguia, SPAIN
TH designs and builds hydrocyclone equipment in a broad range of models and sizes to ensure high treatment capacity for the classification and separation of fine particles in solid/liquid suspensions. The modular design of HCH and HCM hydrocyclones means that their layout and operating conditions can be adapted so that the classification point can be set between ...
Manufactured by:Ecomax Engineering based inTashkent City, UZBEKISTAN
Hydrocyclones are used to treat waste water from metallurgical plants, factories for the production of ceramic products, glass, building materials containing particles of sand, scale, glass, ceramics, etc. The principle of operation of hydrocyclones is based on the separation of solid phase particles in a rotating fluid ...
Manufactured by:Gromatex based inChesterfield, UNITED KINGDOM
The Gromatex Hydro Cyclones range consists of the C26, C20 and C15. The C26 is currently the largest of the Gromatex hydro cyclone range. It has a 660mm feed chamber and a 6” inlet. The medium sized C20 has a 500mm feed chamber and a 6” inlet while the smallest cyclone in the Gromatex hydro cyclone range is the C15 which has a 380mm feed chamber and a 4” inlet. All three ...
Manufactured by:Valmet based inEspoo, FINLAND
An optimal solution for high-consistency, high-demand hydrocyclone applications. Operating at up to 2% consistency, this two-stage hydrocyclone features three forward hydrocyclones in one, single unit. Valmet Twister Hydrocyclone features Mid-cone Dilution Technology and delivers energy savings with lower applied energy and lower ...
Manufactured by:Binder Co AG based inGleisdorf, AUSTRIA
The compact plant GCS from Comec-Binder for classifying and dewatering materia. The GCS sand classifier from Comec-Binderis a compact and modular system for the efficient classification and desludging of sand. Precise separation cuts and a minimum of water ensure excellent quality in the end product. ...
Manufactured by:Hudson Industries based inVienna, OHIO (USA)
Operating volumes to 5,000 gpm. Operating pressures 50-1500 psig. Custom engineered application, i.e. Oil and Gas Industry, Manufacturing,. Chemical Processing. Available in a variety of Materials. Oil Removal as low as 10-15 ppm of separable oil in ...
Manufactured by:FLSmidth A/S based inValby, DENMARK
Innovative hydrocyclone design; KREBS gMAX Cyclones incorporate improved geometry enhancing our inlet head, cylinder section, cones and apex. The result? Finer, sharper particle separations and significantly advanced performance for your ...
Manufactured by:AKW Apparate Verfahren GmbH based inHirschau, GERMANY
Hydrocyclones are important and economically viable systems for the wet-mechanical separation and classifying processes of ores and minerals. AKA-VORTEX are applied across the industry in various areas: sorting, desliming, closed circuit grinding, solids recovery, ...
Manufactured by:FLSmidth A/S based inValby, DENMARK
There’s a reason our D-Series Cyclones are found in mining processes. They work! Our D-Series Cyclone is a loyal workhorse in the world of cyclone technology – providing excellent separations, day in and day out keeping your processes running smoothly and less downtime. They are a go-to choice for your mining and industrial ...
Manufactured by:ZAM Kęty Sp. z o.o. based inKęty, POLAND
Solutions applied in manufacturing of classifying and thickening hydrocyclones type HC resulted from 25 years of tests and experience of our Company in close cooperation with the scientists from the Institute of Non-Ferrous Metals in Gliwice. They are applied mainly in mechanical preparation process of mineral raw materials to wet classification in the process of pulverisation, ...
Manufactured by:ARR FreeFlow Private Limited based inKanchipuram, INDIA
Polyurethane Hydro-Cyclone provides strength and corrosion resistance in light-duty and low-temperature ...
Manufactured by:Elgin Separation Solutions based inStafford, TEXAS (USA)
Elgin’s polyurethane molded hydrocyclones are available in a number of configurations, ranging from 60 gpm systems to 2,000 gpm systems and capable of achieving a solids cut point of 25 microns. Each hydrocyclone is made of high durameter, durable polyurethane and can be fitted with independent valve isolation, discharge deflection devices, and pressure ...
Manufactured by:Wonderfil Srl based inCESENA (FC), ITALY
TWISTERFIL are hydrocyclonic separators made entirely of stainless steel, designed for the separation and removal of sand, debris and sedimentable solids from the treated ...
Manufactured by:SG Filters S.r.l - Sistemi Globali di Filtrazione based inContrada Riposo, ITALY
The hydrocyclone filter is used for irrigation water from wells, rivers and lakes with a considerable amount of suspended sand. It is necessary to attach a mesh filter after the separator to retain the sand particles that are not precipitated by the centrifugal ...