Refine by
Applications
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
In Stack Sampling Equipment & Supplies
56 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
Distributed by:ENCO LTD based inAthens, GREECE
ENCO offers a complete range of off-line sampling equipment for dust and gaseous emissions. They are all instruments operating with standard reference methods (EN, ISO and US EPA methods) and are used for periodic measurements according to the environmental legislation, spot measurements or for calibration of continuous emission analysers according to related standards (EN 14181, ...
Manufactured by:Genius5-Instruments GmbH based inKottingbrunn, AUSTRIA
Genius5 AiO system developed to support EU Commission implementing decision 2017/1442 and plant operators. Commission implementing decision (EU) 2017/1442 defines very low limit valus for the emission of mercury. Incinerators >= 300 MW have to measure contineously, incinerators <= 300 MW have to measure 4 times a year using EN 13211. The legal limit values for mercury are reduced to 1 - 2 ...
Manufactured by:Westech Scientific Instruments (Westech) based inUpper Stondon, UNITED KINGDOM
Westech Scientific Instruments (Westech) provides a complete range of Manual Stack Trains for isokinetic and gas sampling of emissions to determine all major emitted pollutants. The standard equipment is modified to meet all current European legislation and requirements and will still comply with existing USEPA methods. ...
Manufactured by:Eonair Technologies Pvt Ltd. based inAhmedabad, INDIA
Our Method 23 Source Sampler Kit is utilized for Method 23 Determination of Dioxins and Furans (D/F’s) and/or Method 0010 Determination of Semi-Volatile Organic Compounds. The sampling train is identical to the standard Method 5 system with the addition of a water-cooled glass condenser and an XAD absorbent module followed by a knockout impinger. The XAD is loaded with Amberlite resin and ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required ...
Manufactured by:AMS Analitica based inPesaro, ITALY
It consists of a probe sampling device with a spout aimed in the opposite direction of the emission exhaust with a heated pre-filter to withhold any particles interfering with the sample (device provided for monitoring of SOx and NOx, SOV without heating). The StackGas 2001 probe is configured to allow the user easy sampling. It is available with two standard suction tube lengths: 350 and 750 mm. ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
The STL Gas Sampler is used for manual wet chemical determination of gaseous pollutants such as HCl, HF, SO2, SO3, NH3, Hg and other metals according to European standard methods. The complete sampling system consists of 1) a heated gas sampling probe (EVA Light Gas Probe), 2) one or several parallel absorption bottle sampling trains and 3) one or several control units CU-1-10 (or ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
The EVA Light Gas Probe is a heated glass probe with a filter holder for a 47 mm plane filter. The probe construction comply with the requirements of most international standards methods for flue gas samplings, i.e. acid gases (HCl, HF, SO2, SO3), ammonia, mercury and other metals and also for organic micro-pollutants (such as dioxins, PAH ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
The STL Gas Sampler is used for manual wet chemical determination of gaseous pollutants such as HCl, HF, SO2, SO3, NH3, Hg and other metals according to European standard methods. The complete sampling system consists of 1) a heated gas sampling probe (EVA Light Gas Probe), 2) one or several parallel absorption bottle sampling trains and 3) one or several control units CU-1-10 (or ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
METLAB offer several alternative equipments for sampling of dioxins (PCDD/PCDF) and other organic micro-pollutants – all fulfilling the requirements in the European Standard EN-1948. The most frequent delivered equipment is the EVA Light Dioxin sampler. Also available are the older Nordic Dioxin Sampler and EVA Dioxin Sampler and also METLAB’s Cooled Probe Dioxin ...
Manufactured by:Metlab Miljö AB based inEnköping, SWEDEN
Suction pyrometers are used for accurate temperature measurements in high temperature flue gases such as fire rooms. The principle is both to reduce the heat transfer by radiation and to increase the heat transfer by convection to the temperature sensor. The suction tube must have a length that allows for traversements in the measurement plane. The flow of cold water must be high enough to ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Meets and exceeds the requirements ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The SC5 is used as a cooling bath for impinger trains or as a chiller with recirculation capabilities for the condensing of micropollutants such as PCDD/PCDF, Heavy Metals etc. Thanks to wide plastic internal bath, it’s possible to place the complete glass set within the SC5 and use it condensation/absorber train for long lasting sampling. The sliding lock allows the device to be completely ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to be easy to move it with just two ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The ST5 is the next generation isokinetic sampler, developed to be efficient, rugged, accurate and user friendly. The perfect companion for stack testers. The ST5 includes all the measuring sensors inside its robust structure making it a single practical device to be taken on the stack and reducing the need of maintenance. Precise isokinetic condition, ...
Manufactured by:HI-Q Environmental Products Company, Inc. based inSan Diego, CALIFORNIA (USA)
HI-Q Environmental Products Company's product line includes complete stack sampling systems, consisting of a specified type of probe, in-line filter holder, the transport line, sampling pump and flow controller. We recommend, design, and supply complete systems. HI-Q Environmental Products Company is able to make ...
Manufactured by:Polltech Instruments Pvt. Ltd. based inMumbai, INDIA
The Manual Stack Monitoring Kit is used to take accurate representative samples of particulate matter and various gaseous pollutants such as SO2, NOX etc. emitted from industrial stacks. It facilitates sampling of the stack emissions in accordance with the methodologies developed by US EPA and as specified by ...