Refine by
Longitudinal Scraper Equipment & Supplies
16 equipment items found
Manufactured by:Arsimak based inZaventem, BELGIUM
It is a mechanical equipment where the sand kept in the sand catcher pools is separated from the water by means of an auger mounted on the carrier construction and driven by a motor and reducer group. It ensures that the sand in the wastewater is kept and separated at the inlet point of the plant in order not to wear out the mechanical equipment and pumps in the plant. Grit present in the ...
Manufactured by:J.A.G. Metallbau GmbH based inNeumu¨nster, GERMANY
Longitudinal scrapers are supplied with scraping plates made of stable plate-edge design and durable water-lubricated running wheels. Each base scraper has its own lifting gear, which is used to lift or raise the scrapers or moved if desired to intermediate positions. ...
Manufactured by:Tehnika Plast-Wastewater Solutions based inUgrinovci-Belgrade, SERBIA
Production of a longitudinal scrapers according to customer requirements Material: Stainless Steel (AiSi ...
Manufactured by:SISMAT ULUSLARARASI LTD. STI. based inKOCAELI, TURKEY
Longitudinal scrapers are mostly used with the purpose of grit and grease removal in pretreatment plants, in basins with a rectangular section. Similarly to circular scrapers, they can be classified with respect to various features. Power input can be realised by means of cable drum or cable trolley. The disposal of the sludge settling at the ...
Manufactured by:Mena Water FZC based inSharjah, UNITED ARAB EMIRATES
Longitudinal Bridge scrapers are designed for desludging and descuming of primary and final settling tanks and can be used as Grit chamber scrapers, sludge scrapers in the treatment ...
Manufactured by:Astim A.S. based inGebze, TURKEY
Travelling bridge is designed according to span as Full Wall, Half Wall, Steel Profile or to avoid high wind loads as Truss Beam. Carriages, which are located at both ends of the bridge, can travel on rails with or without pinion rock or on poylurethane tyred wheels with guide wheels. The drive unit can be mounted either at the end carriages or at the middle of the bridge. Bridge movement ...
Manufactured by:J.A.G. Metallbau GmbH based inNeumu¨nster, GERMANY
Grit chamber scrapers can be designed with or without grease scraper system. The grease scraper system can be designed with manual or automatic lifting gear. In addition, all grit chambers can be designed as plate or suction scrapers. Use on covered tanks is possible for all ...
Manufactured by:SISMAT ULUSLARARASI LTD. STI. based inKOCAELI, TURKEY
Similarly to longitudinal scrapers, they are utilised in channels with a rectangular section. Scraping blades are mounted between two chains, which, in turn, are fitted between the shafts and wheels at channel corners. The continuous motion of the chain actuated by the revolution of the shaft drive the scraper blades that clean the sludge ...
Manufactured by:Stemmann-Technik GmbH based inSchüttorf, GERMANY
Mobile equipment, in particular various types of cranes such as gantry cranes and indoor cranes, different loading devices and open-cast mining large-scale equipment but also longitudinal scraper bridges in purification plants and travelling platforms implement the transfer of energy and data via flexible power and control ...
Manufactured by:Probig GmbH based inVöcklamarkt, AUSTRIA
The PROBIG® floating sludge extraction system is our patented solution for removing floating sludge from your wastewater treatment plant. The floating sludge extraction system can be installed in circular and rectangular tanks. Retrofitting existing scraper bridges and the operation in combination with longitudinal scrapers is also possible. ...
by:IETOS based in, EGYPT
As a part of preliminary treatment Grit & Grease are separated and collected for disposal by a for disposal by a longitudinal travelling bridge, the scraper has a collection system in the top for grease removal and a bottom scraper for removal ofcollected ...
Manufactured by:Aqseptence Group GmbH based inAarbergen, GERMANY
The Passavant Scraper Technology for Longitudinal Tanks have been especially developed for automatically scraped, rectangular sedimentation ...
Manufactured by:Neuhold Environmental Technology based inGleisdorf , AUSTRIA
Scrapers for Longitudinal tanks, Circular tanks. Type of construction: Suction scrapers with or without pumps. Chain scrapers. Mechanically or hydraulically operated scrapers. ...
Manufactured by:Aqseptence Group GmbH based inAarbergen, GERMANY
The Passavant Grit Chamber Scrapers is a robust and reliable scraper for the removal of grit sediments and floating scum (such as oil and grease) from longitudinal grit and grease ...
Manufactured by:DAGA Equipment based inBarcelona, SPAIN
Equipment designed for the extraction of sand, fats and floating materials. ...
Manufactured by:Adiss S.A. based inTau?ii Magheraus, ROMANIA
Primary settling is designed to capture gravitationally settleable suspended substances that have passed through sand separators and grease separators. The retained substances are referred to as primary sludge. The materials retained together with the primary sludge include suspended solids and organic substances expressed as the five-day biochemical oxygen demand (SS and BOD5). Secondary ...