Refine by
Applications
- Flow Control and Heat Exchange Solutions for Chlor-Alkali
- Flow Control and Heat Exchange Solutions for Chemical and Petrochemicals
- Flow Control and Heat Exchange Solutions for FPSOs
- Flow Control and Heat Exchange Solutions for Copper and Other Metals
- Water Quality Management Instruments for Reverse Osmosis
Membrane Failure Equipment & Supplies
16 equipment items found
Premium
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
Patent # 4,762,611) reliably monitors total dissolved solids 24 hours a day. A quick glance at the display assures RO users of their water TDS quality. Should membrane failure or other problems cause TDS to rise above the set point, the words “CHECK SYSTEM” flash in the LCD. This silent indicator alerts, rather than alarms, the user that service may ...
Manufactured by:Pure Filtration LLC based inDover, NEW HAMPSHIRE (USA)
Mixed pack "replaceable" membranes in center feed, corner feed, top center and bottom center feed available. The plates are unique and offer easy membrane replacement for those difficult chemical or mining operations. This design saves cost by not having to replace the entire plate if a membrane failure occurs. ...
Manufactured by:Techlink Associated International Engineers based inVilleneuve d’Ascq, FRANCE
TEFFLUX® nanometric pPTFE membranes are produced in the USA. They are seamless tubes of about 15mm diameter of expanded PTFE. The absence of seams is a strong guarantee against failures of membranes. The tubes are mounted on PP cylinders, and assembled in sets of nine, which more or less replicate the dimensions of a classic candle. For this ...
by:Doble Engineering Company based inWatertown, MASSACHUSETTS (USA)
The Doble Delphi is a compact on-line DGA sensor that mounts directly to a transformer valve or can be mounted adjacent to the transformer when the need arises. The Delphi is a robust instrument housed in a stainless steel enclosure that uses proven fuel cell technology to provide a reliable indication of the gas levels in the oil with easy to understand displays. It is made specifically for the ...
Manufactured by:Kurita America Inc. based inMinneapolis, MINNESOTA (USA)
RoClean L612 is a proven alkaline cleaner designed to remove biomass and organic foulants from reverse osmosis membranes. It’s unique blend of surfactants and chelants provide a deep cleaning of membranes at a lower pH than most alkaline cleaners. This makes RoClean L612 very effective, while still being safe for CA and TFC Reverse Osmosis membranes. It is also acceptable for use in ...
Manufactured by:JVK Filtration Systems GmbH based inGeorgensgmünd, GERMANY
Squeezing indicator working on the basis of the flotation principle shows equilibrium position when no squeezing media is flowing As far as the cake can be further compressed the indicator will remain deflected showing that the squeezing process is not yet finished At maximum deflection the full cross area of the flow channel is opened In case of a membrane plate leak the indicator deflects ...
Manufactured by:Liquid Boot, By Trident Environmental Group LLC based inNorfolk,, MASSACHUSETTS (USA)
Liquid Boot is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into ...
Manufactured by:Aquaporin A/S based inKongens Lyngby, DENMARK
The Aquaporin Inside® Drinking Water Reverse Osmosis (DWRO™) membrane elements are biomimetic products that get their unique properties from their embedded aquaporin proteins, nature’s water channels. The Aquaporin Inside® DWRO™ membranes are available in standard configurations and can easily fit into any conventional point-of-use residential or commercial RO ...
Manufactured by:DWA GmbH & Co. KG based inUbstadt-Weiher, GERMANY
By the double-stage setup the modula TP provides highest permeate quality even at a low feed water quality. As with the modula system the modula TP is designed to comply with different international dialysis requirements and regulations. Through two independent stages the modula TP provides for total operation safety. With one stage out of service the other can take over the complete duty to ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
Manufactured by:Aquaporin A/S based inKongens Lyngby, DENMARK
The Aquaporin Inside® Drinking Water Reverse Osmosis (DWRO™) membrane elements are biomimetic products that get their unique properties from their embedded aquaporin proteins, nature’s water channels. The Aquaporin Inside® DWRO™ membranes are available in standard configurations and can easily fit into any conventional point-of-use residential or commercial RO ...
Manufactured by:Aquaporin A/S based inKongens Lyngby, DENMARK
The Aquaporin Inside® Drinking Water Reverse Osmosis (DWRO™) membrane elements are biomimetic products that get their unique properties from their embedded aquaporin proteins, nature’s water channels. The Aquaporin Inside® DWRO™ membranes are available in standard configurations and can easily fit into any conventional point-of-use residential or commercial RO ...
Manufactured by:Aquaporin A/S based inKongens Lyngby, DENMARK
The Aquaporin Inside® Drinking Water Reverse Osmosis (DWRO™) membrane elements are biomimetic products that get their unique properties from their embedded aquaporin proteins, nature’s water channels. The Aquaporin Inside® DWRO™ membranes are available in standard configurations and can easily fit into any conventional point-of-use residential or commercial RO ...
Manufactured by:Hiden Analytical Ltd. based inWarrington, UNITED KINGDOM
The Hiden pQA portable gas analyser is a versatile mass spectrometer and offered with a range of interchangeable sampling inlets to suit a broad application range. MIMS inlets are offered for analysis of dissolved species in ground water, fermentation cultures, soil samples, and general applications where analysis of dissolved species in liquid sample is required. The system is suited to gas ...
Manufactured by:CETCO based inNew York, NEW YORK (USA)
LIQUID BOOT is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT is installed under slab and on below grade vertical walls as a gas vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT spray-application directly to penetrations, footings, grade beams, pile caps and ...
Manufactured by:BoldEco Environment, Inc. based inSkillman, NEW JERSEY (USA)
VEnTO Benefits - Pulse Jet Baghouse: Fully-automated, adaptive controller Full-spectrum pressure cleaning (hi-med-low) Extends bag mfg guarantee by two additional years Reduces energy consumption Enhances capture of particulate and condensables Scroll down for more information on ...