Metal Swarf Processing Equipment & Supplies
7 equipment items found
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
Long and curly chips, swarf bundles of alüminium ,steel or other metarials can be transferred to silo or to the next machine in the swarf handling system. Steel belt conveyors are designed in order to ensure the maximum product cycle and minimum service ...
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
Long and bushy swarf is broken up at a low rotating speed continuesly by the horizantal swarf shredder. Available for the carbon steel, stainless steel, aluminium alloys, titanium, 1200 N/mm2 and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer. Swarf is fed through the upside part of the shredder. On the rotating mil and on the back wall of the ...
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
Chip Wringer separates the any kind of swarf formed in metal removing processes through a sheet metal filter from the oil.These oil on the swarf made it contamined(dangerous waste). After centrifuge process the oil percentage is %1-4 and swarf is not contamined. ...
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
Aluminium, steel and the other material swarf are separated from the cutting oil and pure oil via chip washing system. Loaded chips to the screw conveyor are washed with the pressurized water and oil removing detergant coming through the nozuls or in dipping bed. The fluid passes through a collecting ...
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
20-30 mm chips or various materials at the same length can be transferred to silo or a centrifuge conveniently. Optionally pressurized nozul washing system or gravital dipping bed washing system canbe ...
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
Long and bushy swarf is broken up at a low rotating speed continuesly by the vertical swarf crusher. Available for the carbon steel,stainless steel,aluminium alloys,titanium ,1200 N/mm2 and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip ...
Manufactured by:Gökmasan Ltd. based inNilüfer, TURKEY
Bar ends, any kind of tramp materials, cutting tools in the swarf after metal removing processes are separated through bar end separator. Aim is to prevent the harm of the cutting tools in a crusher or unbalance of the centrifuge. Bar end separators can be manufactured in accordance with the process requirements in very ...