Refine by
Petroleum Testing Equipment & Supplies
59 equipment items found
Manufactured by:GTJTest based inCangzhou City, CHINA
The Asphalt Viscosity Tester is engineered to align with the People's Republic of China industry standards JTG E20-2011 and SH/0557 for determining the dynamic viscosity of viscous petroleum asphalt using the vacuum decompression capillary method. This instrument is specifically designed for use with a vacuum decompression capillary viscometer, ensuring accurate measurement in ...
Manufactured by:Dexsil Corporation based inHamden, CONNECTICUT (USA)
Relying on laboratory methods to determine hydrocarbon contamination in soil is both time consuming and expensive. Laboratory methods, such as EPA Method 8015, are very expensive and have turnaround times of one to two weeks. Most samples analyzed by this method limit the results to Gasoline Range Organics (GRO) or Diesel Range Organics (DRO). When limiting the analysis to these two ranges, ...
Manufactured by:Hanby Environmental based inFulshear, TEXAS (USA)
First, fast and accurate, non-instrument testing device for detecting total petroleum hydrocarbons (TPH) in water. Includes set of 15 tests for ...
Manufactured by:Hanby Environmental based inFulshear, TEXAS (USA)
The Hanby system is a field portable method for the determination of petroleum related substances. Accuracy, speed and simplicity are fundamental to this groundbreaking technique that was discovered in 1986. The Hanby field test product line provides quanitative and qualitative analysis of soil and water samples in the field. Includes set of 15 ...
Manufactured by:LAB-KITS, brand of U-THERM International HK Limited based inKowloon, HONG KONG
This instrument is designed and made as per standards GB/T3536-2008 Petroleum Products - Determination of Flash and Fire Points - Cleveland Open Cup Method and ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester. It is applicable to all petroleum products with flash points above 79? ...
Manufactured by:Shandong Shengtai Instrument co.,Ltd based inJinan City, CHINA
ISO 13736 Automatic Abel Closed Cup Flash Point Tester Petroleum Products With A Flash Point Between - 30 And 70. SH21789 Automatic Abel closed flash point tester is designed and manufactured according to the requirements of the national standard GB/21789 "Determination of flash point of petroleum products and other liquids (Abel closed cup method)" and ...
Manufactured by:Labtech Instrument Co., Limited based inHengli, CHINA
Determine kinematic viscosity of liquid petroleum products including transparent and opaque liquid, by time measurement for a volume of liquid to flow under gravity through a calibrated glass capillary viscometer as per ASTM ...
Manufactured by:National Instruments Corporation based inHaridwar, INDIA
This apparatus is used for determination of flash point and fire point of petroleum products open cup flash above 80°C as per specification IP 36 and IS: 1448 (P: 69) 1969. The apparatus consists of a cup, heating plate to specific dimension thermometer clip and test flame attachment with swivel joint for passing over test liquid surface in ...
Manufactured by:Labotronics Ltd based inWilmington, DELAWARE (USA)
Automatic Oil Acidity Tester LB-100AT is a micro-computer controlled system with neutralization titrator. It is characterized by automatic change over and testing between six sample cups for parallel comparison of acid value testing ...
Manufactured by:Labotronics Ltd based inWilmington, DELAWARE (USA)
Accelerated iron corrosion tester LB-10AIC is a microcomputer controlled system with electric heating mode. The constant stirring in water and oil tank promotes temperature consistency throughout the ...
Manufactured by:Shivam Instruments based inNew Delhi, INDIA
For determining the scratch hardness of ready mixed paints and enamels, which is the minimum load required to produce a scratch showing the bare metal surface of the painted panel. The apparatus consists of a 1mm dia hemispherical stainless steel needle, fixed to a platform of a counter- balanced rod, which is assembled on a grooved platform. A rack moves through the groove, to which a painted ...
Manufactured by:Labotronics Ltd based inWilmington, DELAWARE (USA)
Aniline point tester LB-10APT is a microprocessor-controlled unit designed under the ASTM D611 Standard. It is characterized by electric stirring for maintaining temperature equilibrium throughout the sample. The front panel consists of knobs for temperature and speed ...
Manufactured by:Kaizen Imperial based in, INDIA
For determination of heat combustion of organic mater and calorific value and sulphur content of coal, solid and liquid fuels. The bomb has a capacity of 300 ml approximately a provided with a high pressure schroder valve. Test as per the recruitment of Institute of Petroleum (IP 12/63T). Supplied with bomb calorimeter vessel with bomb support, water jacket, ...
Distributed by:S3 Instruments based in, ONTARIO (CANADA)
Purpose: The instrument is suitable to determine closed cup flash point of petroleum products, which is described as the lowest temperature at which the mixture of a petroleum product sample vapor and air contacts flame and makes a flash when the sample is heated in a closed cup under the stipulated condition, reference to ASTM ...
Distributed by:S3 Instruments based in, ONTARIO (CANADA)
Purpose: It is suitable to determine pour point and cloud point of petroleum products. It is also suitable to determine pour point and cloud point of petroleum products as per ASTM D97, ASTM D2500, IP15, and ...
Manufactured by:Tryte,Tryte Technology (H.K.) Limited based inKowloon, HONG KONG
This instrument is designed and manufactured for determination corrosion of the metal when lubricating oil, hydraulic oil, turbine oil and other oils in aqueous, can do copper, silver pieces and liquid rust ...
Distributed by:S3 Instruments based in, ONTARIO (CANADA)
Purpose: The Oxygen Bomb Calorimeter has been widely used to determine heat value of coal, oils, tar, and paraffin, etc. It is the desired instrument for power plants, smelting, cement, and petrochemical, scientific research institutes, and colleges and ...
Manufactured by:Hention Electrical Equipment Co..Limited based inDadukou, CHINA
The HITT Automatic Interfacial Tension Tester is designed and made as per GB/T6541 "Test Methods for Interfacial Tension of Petroleum Products between Oils and Water (Ring Methods)". It is suitable to determine interfacial tension between mineral oils and water under non-equilibrium conditions (Liquid-liquid interface). ...
Manufactured by:EIE Instruments Private Limited based inDaskroi, INDIA
As per IS 335 for transformer oil with inside dimension 12" x 12" x 14" thermostatically controlled with air circulation arrangement complete with 4 nos. 400 cc beakers thermostatically controlled. With digital controller. With contact thermometer & ...
Manufactured by:EIE Instruments Private Limited based inDaskroi, INDIA
Method A, Method B, Method C, Method D, Method A: Aniline point apparatus as per IP 2 & IP 1448(P-3), ASTM D-611 method A complete with jacket without ...