Refine by
Applications
- Wastewater Infrastructure Renewal Solutions for Oil & Gas
- Wastewater Infrastructure Renewal Solutions for Airport
- Wastewater Infrastructure Renewal Solutions for Potable Water
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Mineral Deposits
- Sewer Cleaning Nozzle, Floor Cleaner and Chain Cutter for Minerals
- Wastewater Infrastructure Renewal Solutions for Wastewater
- Wastewater Infrastructure Renewal Solutions for Stormwater
Pipe Pulling Equipment & Supplies
113 equipment items found
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC Tools 4-inch standard pipe-bursting heads pull pipe-ends or PE caps fused to a replacement HDPE pipe. This assembly pulls with a 3/4” or 5/8” cable and an open shackle termination. The head-assembly pulling eye hinges at the shackle pin for jobs with tight ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC-Lock standard 6-inch head is used to pull a pipe-end or a polyethylene pipe fused to an HDPE replacement pipe. This assembly pulls with an open shackle termination and a 3/4” cable. The hinging of the pulling eye at the shackle pin enables maneuverability for tight-entry ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
Pulling force: 24 tons @ 10,000 psi. Piston area: 4.81 square inches. Cable size: 3/8″, 5/8″, 3/4″. Puller weight: 67 pounds. 10” pulley base: 82 pounds (12.75” L x 12” W x 16.5” H). 20” x 1” steel resistance plate: 40 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The Hi-Flow 14 is the result of years of product field testing in the context of TRIC Tools lateral bursting systems. As a part of the new hydraulic pump line for residential pipe bursting, the Hi-Flow 14 pumps for pipe bursting systems are the optimal pairing for our X30 puller, yielding a four-times speed increase on residential projects. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
TRIC Tools is the pipe bursting equipment manufacturer bringing you the M50 System for municipal and home applications. This provides the perfect combination of size and power. The system requires a backhoe or a TRIC hydraulic pump to power its pipe pulling equipment with the ability to deliver it 48 tons of pulling force. ...
Manufactured by:Pipe Equipment Specialists Ltd. (PESL) based inThornaby, UNITED KINGDOM
The Breakaway Connector, also referred to as a 'weak link', is an essential component designed to protect pipes and cables from damages due to excess tensile loads. Constructed from high grade stainless steel, the connector splits into two sections when a predetermined load is exceeded, thereby preventing harmful forces on cables or pipes. Each model of Breakaway ...
Premium
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
Bore Shield ARO GW is a field-applied abrasion resistant outerwrap (ARO) consisting of a unique, heavy duty fiberglass reinforcement and water-activated urethane resin, designed for impact and abrasion resistance when installed over pipeline girth ...
Premium
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
The composite system includes a custom weave, heavy fiberglass tape, pre-coated with a toughened, water-activated urethane resin. The high bond strength provides resistance to shear if pipe is to be pulled and the unique weave of the reinforcement tape enables spiral applications for ease of installation on long runs of pipe or pilings. ...
Premium
Manufactured by:InduMar Products, Inc. based inHouston, TEXAS (USA)
The composite system includes a custom weave, heavy fiberglass tape, pre-coated with a toughened, water-activated urethane resin. The high bond strength provides high durability and resistance to shear if pipe is to be pulled. Installation entails only wrapping the composite around the area in need of protection and subsequent compression banding. The Bore Shield ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Stallion Nozzle is a Tier Three Fluid Mechanics medium-sized nozzle excellent for storm drain or sewer cleaning applications where pipes are heavily exposed to debris, or where pipes are heavily damaged or weakened. The Stallion is a fantastic flushing nozzle, however, due to the angle of the jets, the Stallion should not be used to clean large pipe walls. The Stallion Nozzle is ideal for ...
Manufactured by:PSI Products GmbH based inMössingen, GERMANY
For pipe pull-in and pipe storage; metal-free solution, also used for multiple pipe pull-in such as bundling. Suitable for cathodic protected ...
Manufactured by:PSI Products GmbH based inMössingen, GERMANY
For pipe pull-in and pipe storage; suitable for larger medium pipes and higher static ...
Manufactured by:PSI Products GmbH based inMössingen, GERMANY
For pipe pull-in and pipe storage; also suitable for particularly small carrier ...
Manufactured by:PSI Products GmbH based inMössingen, GERMANY
For pipe pull-in and pipe storage; metal-free solution for large medium pipes and extreme static loads; suitable for cathodic protected ...
Manufactured by:PSI Products GmbH based inMössingen, GERMANY
For pipe pull-in and pipe storage; metal-free solution for small medium pipes and low static load; suitable for cathodic protected ...
Manufactured by:Aaspee Machinery Pvt Ltd based inAhmedabad, INDIA
Aaspee Machinery specializes in manufacturing high-quality pipe rack rollers for pipe pulling & pushing vertically in oil and gas pipeline projects. Our pipe rollers are designed to offer accurate precision positioning for safer operations. Our pipeline pipe rollers are user-friendly, low-maintenance, ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The Single-Blade 1″ Water Line Bursting Head is used for replacing 1″ copper service lines by pulling with a 3/8″ Cable (TTA-CA38-80PTI). The single blade works to cut copper pipe with the force concentrated on a single blade, whereas the Three-Blade Bursting Head (TT-WDGE-3WED) is used more for bursting plastic lines. These bursting heads can ...