Refine by
Pipe Pulling Equipment Supplied In Canada
26 equipment items found
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC Tools 4-inch standard pipe-bursting heads pull pipe-ends or PE caps fused to a replacement HDPE pipe. This assembly pulls with a 3/4” or 5/8” cable and an open shackle termination. The head-assembly pulling eye hinges at the shackle pin for jobs with tight ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC-Lock standard 6-inch head is used to pull a pipe-end or a polyethylene pipe fused to an HDPE replacement pipe. This assembly pulls with an open shackle termination and a 3/4” cable. The hinging of the pulling eye at the shackle pin enables maneuverability for tight-entry ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
Pulling force: 24 tons @ 10,000 psi. Piston area: 4.81 square inches. Cable size: 3/8″, 5/8″, 3/4″. Puller weight: 67 pounds. 10” pulley base: 82 pounds (12.75” L x 12” W x 16.5” H). 20” x 1” steel resistance plate: 40 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The Hi-Flow 14 is the result of years of product field testing in the context of TRIC Tools lateral bursting systems. As a part of the new hydraulic pump line for residential pipe bursting, the Hi-Flow 14 pumps for pipe bursting systems are the optimal pairing for our X30 puller, yielding a four-times speed increase on residential projects. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
TRIC Tools is the pipe bursting equipment manufacturer bringing you the M50 System for municipal and home applications. This provides the perfect combination of size and power. The system requires a backhoe or a TRIC hydraulic pump to power its pipe pulling equipment with the ability to deliver it 48 tons of pulling force. ...
Premium
Manufactured by:KEG Technologies, Inc. based inSpartanburg, SOUTH CAROLINA (USA)
The Stallion Nozzle is a Tier Three Fluid Mechanics medium-sized nozzle excellent for storm drain or sewer cleaning applications where pipes are heavily exposed to debris, or where pipes are heavily damaged or weakened. The Stallion is a fantastic flushing nozzle, however, due to the angle of the jets, the Stallion should not be used to clean large pipe walls. The Stallion Nozzle is ideal for ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The Single-Blade 1″ Water Line Bursting Head is used for replacing 1″ copper service lines by pulling with a 3/8″ Cable (TTA-CA38-80PTI). The single blade works to cut copper pipe with the force concentrated on a single blade, whereas the Three-Blade Bursting Head (TT-WDGE-3WED) is used more for bursting plastic lines. These bursting heads can ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 2” Triple-Chuck Head Assembly is used to burst old or damaged pipes while pulling in a new 2” replacement pipe. The head is pulled by a 3/4” cable that is annealed and rounded at the end. The cable is inserted into the Nose (TT-TCHEAD-NOSE), and retained by an internal set of ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 3” Triple-Chuck Head Assembly is used to burst old or damaged pipes while pulling in a new 3” replacement pipe. The head is pulled by a 3/4” cable that gets annealed and rounded at the end. The cable is inserted into the Nose (TT-TCHEAD-NOSE), and retained by an internal set of ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC Tools 4” Fuse-On pipe bursting head pulls a PE Cap (TT-HEAD-4PEC) fused to a replacement HDPE pipe. This assembly is pulled by a 3/4” or 5/8” compact swaged cable with a Crosby open-socket termination. The head assembly hinges at the pulling eye for jobs with tight ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC Tools 4” Fuse-On pipe bursting heads pulls a PE Cap (TT-HEAD-4PEC) fused to a replacement HDPE pipe. This assembly is pulled by a 3/4” or 7/8” compact swaged cable, and has a special pulling core that allows for use with a threaded stud connection. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC Tools 8-inch standard bursting head attaches to a pipe end or PE cap that is fused to the replacement high-density polyethylene pipe. Pulling happens with a 7/8”, 1”, 1.125” or 1.25” swaged cable, and a 2-inch x 4.5 TPI stud termination. The PE driver functions as the head driver. ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 4” TRIC-Lock standard pulling core assembly is used to pull the Shell (TT-HEAD-4SHELL) of the bursting head assembly, as well as the replacement HDPE pipe. This assembly is pulled by a 3/4” or 5/8” compact swaged cable with a Crosby open-socket termination. The head assembly hinges at the ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The 4” TRIC-Lock pulling core assembly (threaded stud) is used to pull the Shell (TT-HEAD-4SHELL) of the bursting head assembly, as well as the replacement HDPE pipe. This assembly is pulled by a 3/4” or 7/8” compact swaged cable, and has a special Pulling Core ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC-Lock 4” head attaches directly to a 4-inch SDR17 pipe’s open end without the use of a PE cap, or fusing to the replacement HDPE pipe. This assembly is pulled by a 3/4” compact swaged cable, and has a special Pulling Core (TT-HEAD-46CORA) that allows for use with a threaded stud ...
Manufactured by:The RuptureSeal Company based inCharlottetown, PRINCE EDWARD ISLAND (CANADA)
For residential, commercial municipal and hazmat applications. Deploys in seconds to provide temporary control of pipe leaks. 2 x 1 " Pipe Plugs. 1 x Pull tye extension. 1 x Steel handle pin. Seals leaks in rigid pipe and lines from 1/8" up to 1" (4mm - 25mm). Up to 12" diameter ...
Manufactured by:TRIC Tools, Inc. based inOakland, CALIFORNIA (USA)
The TRIC-Lock 4-inch head works as a direct attachment to a 4-inch SDR17 pipe’s open end without the need for a PE cap or to fuse with the replacement HDPE pipe. The entire assembly pulls with a 3/4” or 5/8” cable via an open shackle. Maneuverability in tight-entry conditions is managed by hinging the head assembly to the ...