Refine by
Process Analysis Equipment Supplied In Morocco
20 equipment items found
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MicroForce 85 crimp monitoring device minimizes faulty crimps, contributes to process optimization using data analysis and ensures traceability in production. The MicroForce 85 is a crimp monitoring device that reliably detects all faulty crimps and contributes to improving the crimping process using data analysis. The ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The mercury analyzer PA-2 is used for continuous monitoring of mercury concentrations in industrial processes. The PA-2 was specially designed for process analysis and operation under harsh industrial condition. The system comes with either the VM-3000 or the UT-3000 photometer to meet different requirements regarding accuracy and sensitivity of ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
Dürr offers several oven designs incorporating through-air only or hybrid technology utilizing impingement and through-air for heating, drying, and thermal curing. Some materials exhibit sufficient air permeability to benefit from highly effective through-air oven designs. While supported on an air-permeable belt, heated and dried air pass through the product, thus affecting internal heat ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
Dürr offers gas-fired and electric IR configurations to meet the demands of a variety of products and applications. These include systems designed for complete drying, preheating, pre-drying, fusing, curing and profiling. By combining the correct wavelength infrared and optimizing of the control system, precise process conditions can be achieved to maximize product quality in the most ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
Belt dryers and ovens provide continuous support to material as it moves through the oven. Examples include non-woven fiber mats, extensible membranes, friable webs, sheeted materials, low-strength tissue and toweling, and many other materials that cannot sustain tension stresses in roll support or flotation ovens. Convection and optional infrared (IR) heating zones efficiently dry and thermally ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Multi-sensor dust monitor for indicative emissions trending in industrial stacks after bag filters, cartridge filters, cyclones and process driers, where regulatory approvals are not necessary. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
Dürr offers gas-fired and electric IR configurations to meet the demands of a variety of products and applications. These include systems designed for complete drying, preheating, pre-drying, fusing, curing and profiling. By combining the correct wavelength infrared and optimizing of the control system, precise process conditions can be achieved to maximize product quality in the most ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-250, featuring our groundbreaking EcoStream™ technology: the most eco-friendly freeze-drying solution for your laboratory. Our innovative cooling technology significantly lowers the environmental impact of the instrument without compromising our commitment to quality and reliability. The L-250 embodies BUCHI’s commitment to enhancing the ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Flexible process assembly for the water & wastewater and chemical industries. Cleanfit CPA871 guarantees the highest operational safety in both standard and demanding applications. Its intelligent functions prevent any leakage of medium during operation, cleaning or calibration, offering optimum protection of the process and operating personnel. The retractable assembly flexibly adapts to ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Certified Multi-sensor dust monitor – category 1 under ATEX / IECEx – for indicative emissions trending and measurement in hazardous zone and in dry processess with elevated pressures. Advanced Probe Electrification featuring long term data logging for process trend analysis and ...
Manufactured by:Meier Energy based inCasablanca, MOROCCO
It supports mobile operations and facilitates data transfer via USB in CSV format, compatible with Excel, for further analysis. The analyzer is complemented by M-Visu software, enhancing data visualization and offering advanced features such as automatic reporting, harmonics spectral analysis, waveform signal capture, and event processing. These ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Real-time process control for continuous NIR-measurements. Quickly and closely monitor key parameters, such as moisture, fat or protein for real-time process control. The NIR-Online Process Analyzer continuously provides accurate measurements within seconds to guarantee you maximal production ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The LCPD BOX is a full extractive sampling probe assembly which extracts the sample gas through a probe & heated filter to remove particulates. To be used with heated analyzers, or with unheated analyzers such as MIR 9000, MIR 9000e, IR IS, by adding a cooling dryer ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The NIRFlex N-500 is the modular FT-NIR spectrometer that you need for reliable results for QC, R&D in applied science and various industries. The NIRFlex N-500 offers a wide range of measuring cells and accessories for flexible performance. ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Therefore the concurrent measurement of amount and intensity of precipitation gives insight into the physics of the removal processes. Further analysis of precipitation is possible through the separation of material flowing through the measurement block and material collected in the optional sample ...
Manufactured by:Ovarro based inEckington, UNITED KINGDOM
EnigmahyQ is a variant of the standard Enigma multi-point correlation logger that has been further optimised for leak location in large diameter pipes and over longer ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
Thus, systematic high quality oceanic in situ precipitation measurements are requested on an international science level and are essential for improved understanding and validation of hydrological processes in satellite, re-analysis and model ...
Manufactured by:Ovarro based inEckington, UNITED KINGDOM
The Enigma is a multipoint “Lift and Shift” system of correlating leak noise loggers that are designed to be used as a temporary or semi-permanent water network survey tool. ...
Manufactured by:Ovarro based inEckington, UNITED KINGDOM
A noise logger designed for detecting and localising water leakage, enabling water suppliers to quickly and efficiently locate leaks in their water ...