Refine by
Applications
- What is the application of carbon black from waste tire pyrolysis plant?
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- What is the applications of pyrolysis oil from waste tyre pyrolysis plant?
- Solutions for Mining
- Recycling Plant for Bio-Waste
- Recycling Plant for Waste Oil
- Pyrolysis Production Plant for Biomass Owners
- Fluidized Catalytic Cracker (FCC) Units for Sustainable Transport Fuels
- Pyrolysis Production Plant for Biobased Chemicals
- Pyrolysis Production Plant for Heat
- Solution for Lead Recycling
- Solution for Copper Recycling
Pyrolysis Process Equipment & Supplies
207 equipment items found
Manufactured by:Henan Doing Machinery Equipment Co., Ltd. based inZhengzhou, CHINA
Pyrolysis / thermolysis is the chemical decomposition of organic materials by heating in the absence of oxygen or any other reagents, except possibly steam. Tyre/plastic pyrolysis process refers to turning waste tyre/plastic into useful resources, such as fuel oil, carbon black, steel wire, etc. The green technology has been proved to be the ...
Manufactured by:Henan Doing Environmental Protection Technology Co., Ltd based inZhengzhou, CHINA
The tire pyrolysis process plant is the machine that can pyrolyze waste tires, waste plastics and waste rubber into oil and gas by using chemical pyrolysis principle. The whole tire pyrolysis process plant is formed by 13 parts, including reactor ,driving device ,vertical catalytic chamber, vertical condenser, ...
Manufactured by:Henan Doing Machinery Equipment Co., Ltd. based inZhengzhou, CHINA
Whatsapp/Tel: 008613526692320 [email protected] A fully continuous tire oil pyrolysis processing line is a system designed for the recycling of waste tires through a process called pyrolysis. In the case of tire pyrolysis, waste tires are heated to a high temperature in a reactor, resulting in the ...
Manufactured by:Henan Doing Environmental Protection Technology Co., Ltd based inZhengzhou, CHINA
Pyrolysis is a thermochemical decomposition of orgnic material at elevated temperatures in the absence of oxygen. Pyrolysis typically occurs under pressure and at the operating temperatures at 430℃. Pyrolysis is a special case of thermolysis, and is the most commonly used for organic materials, being, therefore, one of the ...
Manufactured by:Henan Doing Machinery Equipment Co., Ltd. based inZhengzhou, CHINA
Besides recycling waste tyres by using shredder machine or rubber powder production line for further reprocessing, Doing has developed the latest waste tyre to fuel oil recycling process pyrolysis plant for sale to deal with the waste tyres in an eco-friendly and profitable method. The plant also can be used to dispose waste plastic, waste rubber, medical waste, ...
Manufactured by:Henan Doing Machinery Equipment Co., Ltd. based inZhengzhou, CHINA
Skid-mounted Pyrolysis Plant Unit: 100KG/D, 500KG/D, etc. Equipment Advantages: Free installation, Cost saving, Easy handling, Tests available Our pyrolysis plant can process a wide variety of raw materials, including waste tires, plastics, rubber, oil sludge, aluminum-plastic composites, medical waste, municipal solid waste, acrylics, resin ...
Manufactured by:Henan Doing Machinery Equipment Co., Ltd. based inZhengzhou, CHINA
DOING Pyrolysis Plant can help you environmentally recycle the waste tires/waste plastics/oil sludge and convert them into Fuel Oil, carbon black, etc. Fuel oil: The calorific value of tire/plastic pyrolysis fuel oil can reach 10350 kcal, which is an excellent industrial fuel oil and can be used for heating power plants, cement plants, glass plants, ceramic plants, steel plants, boiler plants, ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
With the Dynamic Loading Sequence Table (DLST), the 6000 series autosampler module provides hands-free and worry-free analysis for an infinite number of samples. The autosampler has 47 positions with capability to add samples on the go. The autosampler is driven by a novel hybrid mechanism, combining the reliability from the state-of-art air actuators and the precision from electronic step ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The CDS HPR Pyroprobe enables users to study both high temperature and pressure in a micro-scale environment, with the convenience of results sent directly to their GC/MS. The unit is built on 5200 platform with a backpressure regulator and heated catalyst bed. Samples can be pyrolyzed at max 500 PSI (3400 kPa), passed through a user-selectable catalyst bed, and collected onto the built-in trap. ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The CDS Model 6200 Pyroprobe adds in an analytical trap to enable collecting analytes using slow rate pyrolysis. The built-in trap also expands the capability to use a reactant gas (like oxygen and air), and perform thermal desorption on sorbent tubes or larger samples. The 6200 also permits direct pyrolysis to the GC in GC carrier gas. ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The CDS Model 6150 Pyroprobe is the basic model of CDS's 6th generation Pyroprobe. The 6150 connects to any model GC with a heated sample line for easy on/off installation. Low thermal mass programmable interface allows for thermal desorption of volatiles before pyrolyzing the sample. ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The Drop-In-Sample-Chamber (DISC) is a novel accessory module for the 6000 series Pyroprobes. It transforms the horizontal sample loading probe used in traditional manual pyrolysis system to a convenient vertical loading system. The DISC saves your precious time by reducing the sample tube loading process. When used with the filler rod, the DISC helps to reduce ...
Manufactured by:CDS Analytical based inOxford, PENNSYLVANIA (USA)
The CDS Model 4000 Pyroprobe is specifically designed for users that occasionally need pyrolysis to assist their work in Pyrolysis - Gas Chromatography - Mass Spectrometry (Py-GC-MS). The 4000 has an economical price tag, and possesses a direct GC injection port mount feature to simplify the operation and installation. Installation and removal only takes minutes on conventional GC. ...
Showcase
Manufactured by:Ennox Biogas Technology GmbH based inHard, AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, designed and calculated. All syngas flares have an own supporting burner ...
Manufactured by:Henan Doing Machinery Equipment Co., Ltd. based inZhengzhou, CHINA
The tire to oil pyrolysis plant is a green technology to solve tire and other environment pollution which are becoming the serious issues nowadays and it is the meaningful industry. The tire pyrolysis oil, one kind of end products extracted from the pyrolysis process, is often used for producing heat, electricity, steam and so ...
Manufactured by:Thermtech AS based inBergen, NORWAY
The TMP (Thermo Mechanical Pyrolysis) enables different methods of pyrolysis with higher efficiency due to a high heat transfer surface area created by the fluidized bed in the process chamber. This patent pending method has been proven as a very effective method for pyrolysis of plastics such as PEHD, PELD, PP etc. In ...
Manufactured by:etavalve GmbH based inZurich, GERMANY
Heavy industries such as metal, glass, and cement production, as well as emerging C02-negative pyrolysis processes, release significant amounts of heat during their operations. Existing technologies are unable to effectivelv utilize this thermal enerev. especially at temperatures between 500 and 900 °C and power levels below five megawatts. ...
Manufactured by:Xinxiang Doing Renewable Energy Equipment Co.,Ltd based in, CHINA
Waste tyre can be converted into fuel oil through tyre pyrolysis process. The most commonly used synthetic polymer used in tire production is styrene-butadiene copolymer. When the pyrolysis temperature exceeds 350 degrees Celsius, the polymer decomposes into small fuel oil and hydrocarbon gase. DOING waste tyre pyrolysis plants ...
Manufactured by:Pyrotech Energy based inMelbourne, AUSTRALIA
Biochar is the solid product of biomass pyrolysis process, which is a carbonaceous residue. Depending on biomass composition and pyrolysis process condition, biochar can have different chemical and physical ...
Manufactured by:ETIA S.A.S. based inCompiègne cedex, FRANCE
Pyrolysis oil is a liquid substance obtained in pyrolysis process and subsequent cooling. It is a complex blends of molecules usually consisting more than 200 different compounds resulting from the depolymerisation of products treated in ...