Refine by
Rectangular Scraper Equipment & Supplies
26 equipment items found
Manufactured by:TecnoConverting Engineering based inSant Fruitós de Bages, SPAIN
Evolution´s logic guide us towards modern plastic components. They are more durable, lighter, simple and safer to handle and fabricate. They are maintenance free and withstand the highest workload demands. ...
Manufactured by:Mass Aritma Sistemleri Insaat Sanayi Ve Ticaret A.S. based inMaltepe, TURKEY
The sedimentation process, an indispensable part of wastewater treatment, is sometimes carried out in rectangular tanks. In this case, the sludge that settles at the bottom needs to be scraped towards the sludge cones located at the inlet of the sedimentation tank. The scraper systems used for this purpose consist of a bridge scraper system that ...
Manufactured by:TOP Machinery(Chengdu) Co., Ltd based inShuangliu, Chengdu, CHINA
Rectangular Travelling Bridge Scraper is suitable for reverse flow flat streaming sedimentation tank and sludge in sediment tank, sand and slag mechanical exclusion, more for the initial sedimentation tank, reverse flow scraping mud drainage, the mud scraper lifts all the mud-sweeping when it is not scraping the mud back trip. when back to the ...
Manufactured by:Sereco S.r.l. based inNoci (Ba), ITALY
The PRVR type consists of a traveling girder used as a walkway, a couple of lateral sliding trolleys, an articulated system for sludge scraping and scum overflow, gear motor for lateral trolleys drive, drive unit of articulated system for bottom sludge scraping and control panel. The gear motor and the drive unit are fitted on in correspondence of bridge centerline. The water inlet is located on ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
Finnchain’s surface scraper system is installed above water level. The scrapers run over two sets of wheels, scraping the surface scum and transferring it to the scum removal channel. All scraper flights in Finnchain’s surface scraper are rubber ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
Lamella tanks are sometimes used for accelerating sedimentation processes. The space required for lamella installations has been taken into account in this bottom scraper system. Finnchain’s chain scrapers run over two sets of wheels, moving on sliding rails at the bottom of the tank, so there is space in the middle and above the chain system for installing lamella plates. Sludge at the ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
The bottom scraper system efficiently removes sludge from the bottom of the tank. In the bottom scraper system, the scraper flights run over two or three sets of wheels, scraping the sludge from the tank bottom and pushing it to a sludge separator. A separate cross conveyor can be installed to the sludge separator, which transfers the sludge to the removal channel. We can provide a system for ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
Double deck tanks are sedimentation tanks located on top of each other. This solution is used especially when land use requires efficiency. The chain scraper systems in double deck tanks are often either combined surface and bottom scrapers or bottom scraper solutions. Maintenance and repair in such tanks is usually expensive and challenging, which is why the reliable performance of the chain ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
Finn chain’s grit collector removes the sand from the bottom of the tank to a removal channel. In the grit collector system, special solutions have been developed for the scraper flights and rails for them to endure the abrasion of sand. Grit collectors are customised according to the client’s tanks and process ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
Our most common chain scraper system efficiently removes sludge from the bottom of the tank as well as the surface. In the combined surface and bottom scraper, the scraper flights run over four sets of wheels, scraping the sludge from the tank bottom and pushing it to a sludge separator. On their way back, the scraper flights skim the surface scum and transfer it to the other side of the tank, to ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
We manufacture surface scrapers for desalination plants where drinking water is produced from seawater. The chains in the surface scrapers are moved by two pairs of wheels, scraping the floating scum on the water surface. Due to high salt contents in the steel parts, the parts must be made of special materials. Super-Duplex EN 1.4410 steel is used in Finnchain’s surface scrapers, which is ...
Manufactured by:Finnchain Oy based inRauma, FINLAND
Finnchain’s scum removal system enables sludge removal from large areas using continuous, natural water flow. The most common applications of the FinnFlow system are preliminary and secondary sedimentation tanks in which scraper flights transfer the sludge close to the FinnFlow collector. The water flow transfers the surface scum to a removal pipe, and clean water is transferred to ...
Manufactured by:Mena Water FZC based inSharjah, UNITED ARAB EMIRATES
The most common chain scraper system scrapes sludge from the bottom and skims surface of the tank. A cross collector can be installed in the sludge hopper for transferring the sludge to the removal system. The rectangular scraper is designed to remove grease and oil and other floating solids from the surface of the wastewater and settlement ...
Manufactured by:Mena Water FZC based inSharjah, UNITED ARAB EMIRATES
The most common chain scraper system scrapes sludge from the bottom and skims surface of the tank. A cross collector can be installed in the sludge hopper for transferring the sludge to the removal system. The rectangular scraper is designed to remove grease and oil and other floating solids from the surface of the wastewater and settlement ...
Manufactured by:Vandezande bvba based inDiksmuide, BELGIUM
A scraper bridge is a mechanical construction forming an integral part of a waste-water treatment plant. It is used for clearing sediment into a sludge collector pit or alternatively for depositing floating substances into a scum removal container. There are two types available: for round basins (circular scraper bridge) and also for ...
Manufactured by:Lackeby Products AB based inKalmar, SWEDEN
Lackeby Travelling grit scraper is a travelling scraper for rectangular grit chambers which can be delivered in two ...
Manufactured by:KD Group based inVejle, DENMARK
Suction scraper bridge type KD 15R for rectangular tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as ...
Manufactured by:Probig GmbH based inVöcklamarkt, AUSTRIA
The PROBIG® floating sludge extraction system is our patented solution for removing floating sludge from your wastewater treatment plant. The floating sludge extraction system can be installed in circular and rectangular tanks. Retrofitting existing scraper bridges and the operation in combination with longitudinal scrapers is also possible. ...
Manufactured by:Innovatek based inISTANBUL, TURKEY
SAND.PLUS (SND+) Grit Scraper is developed based on vast experience in the design and manufacturing of robust and reliable scrapers for rectangular grit and grease removal and tanks, operating for effective grit and grease removal to reduce the serious wearing effect on the process pumps and other mechanical equipment and preventing other ...
Manufactured by:Dewaco Ltd. based inLaitila, FINLAND
For sludge and scum collection and removal we offer chain & flight-type chain scraper systems. These are the most sophisticated systems for sludge and scum removal from rectangular settling tanks. Chain Scraper Systems can be used in multiple application basin ...